Abstract
We describe mechanical and chemomechanical polishing of CVD ZnSe with the use of various polishing and adhesive rosin-based resins and examine the effect of the softening temperature of polishing resins on the material removal rate and the optical characteristics of CVD ZnSe.
Similar content being viewed by others
References
Vinokurov, V.M. and Kukleva, Z.A., Effect of the Physical and Mechanical Properties of Resin Polishers on the Glass Polishing Process, Opt.-Mekh. Prom-st., 1959, no. 7, pp. 49–55.
Vinokurov, V.M., Issledovanie protsessa polirovki stekla (Glass Polishing Process), Moscow: Mashinostroenie, 1967.
Devyatykh, G.G., Korshunov, I.A., Gavrishchuk, E.M., et al., Volume Inhomogeneities in Polycrystalline Zinc Selenide Produced by Chemical Vapor Deposition, Vysokochist. Veshchestva, 1993, no. 3, pp. 16–23.
Gavrishchuk, E.M., Timofeev, O.V., Pogorelko, A.A., and Suchkov, A.I., Effect of Polishing Conditions on the Optical Properties of Zinc Selenide Surfaces, Neorg. Mater., 2004, vol. 40, no. 3, pp. 267–271 [Inorg. Mater. (Engl. Transl.), vol. 40, no. 3, pp. 217–220].
GOST (State Standard) 11141-84: Optical Components. Surface Finish Classes. Evaluation Techniques, 1984.
Gezci, S. and Woods, J., Dislocation Etch Pits in Zinc Selenide, J. Mater. Sci., 1972, vol. 7, pp. 603–608.
Sotnikov, V.T. and Zhuk, A., Impurity Profiles in the Polishing-Induced Damage Layer of Zinc Selenide, Opt.-Mekh. Prom-st., 1985, no. 11, pp. 32–35.
Gaivoronskii, P.E., Khlopochkina, E.L., Elliev, Yu.E., et al., Waste Management in the Production of Optical Zinc Selenide (Communication 1), Vestn. Nizhegorod. Univ. im. N.I. Lobachevskogo, Ser. Khim., 1998, no. 1, pp. 3–6.
Author information
Authors and Affiliations
Additional information
Original Russian Text © E.M. Gavrishchuk, E.Yu. Vilkova, O.V. Timofeev, S.R. Kushnir, B.A. Radbil’, 2006, published in Neorganicheskie Materialy, 2006, Vol. 42, No. 7, pp. 775–780.
Rights and permissions
About this article
Cite this article
Gavrishchuk, E.M., Vilkova, E.Y., Timofeev, O.V. et al. Polishing of ZnSe using rosin-based resins. Inorg Mater 42, 699–704 (2006). https://doi.org/10.1134/S0020168506070016
Received:
Issue Date:
DOI: https://doi.org/10.1134/S0020168506070016