Abstract
The large droplet method (in a graphite cup) was used to study the temperature dependences of density ρ and surface tension σ of bismuth lead (∼10% Bi) in the temperature range from its melting point to ∼1050 K in a helium atmosphere. It was found that the ρ(T) and σ(T) dependences are close to linear and decrease with temperature. The sessile drop method (on a substrate) was used to study temperature dependences of the angle θ of wetting new high-nickel and ferritic-martensitic pressure-vessel steels by bismuth lead in the above temperature range in a vacuum (0.01 Pa). It is shown that the steel substrates alloyed with aluminum are not wetted in the temperature range studied.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Subbotin, V.I., Ivanovskii, M.N., and Arnol’dov, M.N., Fiziko-khimicheskie osnovy primeneniya zhidkometallicheskikh teplonositelei (Physico-Chemical Principles for the Application of Liquid Metal Coolants), Moscow: Atomizdat, 1970.
Chentsov, V.P., Mozgovoi, A.G., Shevchenko, V.G., and Kiselev, A.I., High Temp., 2012, vol. 50, no. 1, p. 38.
Kalazhokov, Zm.Kh., Zikhova, K.V., Kalazhokov, Z.Kh., Kalazhokov, Kh.Kh., and Khokonov, Kh.B., High Temp., 2012, vol. 50, no. 6, p. 728.
Kashezhev, A.Z., Kutuev, R.A., Ponezhev, M.Kh., and Sozaev, V.A., Rasplavy, 2013, no. 5, p. 66.
Yagodin, D., Sivkov, G., Volodin, S., Popel, P., and Mozgovoj, A., J. Mater. Sci., 2005, vol. 40, nos. 9–10, p. 2259.
Morita, K., Maschek, W., Flad, M., Yamano, H., and Tobita, Y., J. Nucl. Sci. Technol., 2006, vol. 43, no. 5, p. 526.
Kanchukoev, V.Z., Ponezhev, M.Kh., Sozaeva, A.B., and Sozaev, V.A., High Temp., 2009, vol. 47, no. 2, p. 292.
Deloffre, P., Terlain, A., and Barbier, F., J. Nucl. Mater., 2002, vol. 301, no. 1, p. 35.
Benamati, G., Fazio, C., Piankova, H., and Rusanov, A., J. Nucl. Mater., 2002, vol. 301, no. 1, p. 23.
Benamati, G., Gessi, A., and Scadozzo, G., J. Mater. Sci., 2005, vol. 40, nos. 9–10, p. 2465.
Pokrovskii, N.L., Pugachevich, P.P., and Golubev, N.A., Zh. Fiz. Khim., 1969, vol. 43, no. 7, p. 2158.
Novakovic, R., Ricci, E., Giuranno, D., and Gnecco, F., Surf. Sci., 2002, vol. 515, p. 377.
Protsenko, P.V., Extended Abstract of Cand. Sci. (Chem.) Dissertation, Moscow State University, Moscow, 2002.
Gubzhokov, M.M., Ibragimov, Kh.I., Kanchukoev, V.Z., Ponezhev, M.Kh., Sozaev, V.A., and Khasanov, A.I., Vestn. Kabard.-Balkar. Gos. Univ., Ser.: Fiz. Nauki, 2003, vol. 8, p. 21.
Ponezhev, I.Kh., Extended Abstract of Cand. Sci. (Phys.-Math.) Dissertation, Kabardino-Balkarian State University, Nal’chik, 1998.
Direktor, L.B., Maikov, I.L., and Zaichenko, V.M., High Temp., 2010, vol. 48, no. 2, p. 176.
Stalder, A.F., Kulik, G., Sage, D., Barbieri, L., and Hoffmann, P., Colloids Surf., A, 2006, vol. 286, p. 92.
Handbook on Lead-Bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-Hydraulics, and Technologies, Paris: OECD Nuclear Energy Agency, 2007, no. 6195.
Kashezhev, A.Z., Ponezhev, M.Kh., Sozaev, V.A., Khasanov, A.I., and Mozgovoi, A.G., High Temp., 2010, vol. 48, no. 5, p. 756.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.A. Kambolov, A.Z. Kashezhev, R.A. Kutuev, M.Kh. Ponezhev, V.A. Sozaev, A.Kh. Shermetov, 2014, published in Teplofizika Vysokikh Temperatur, 2014, Vol. 52, No. 3, pp. 392–396.
Rights and permissions
About this article
Cite this article
Kambolov, D.A., Kashezhev, A.Z., Kutuev, R.A. et al. Polytherms of density and surface tension of bismuth lead and of angle of wetting of high-nickel and ferritic-martensitic steels by the Pb-Bi alloy. High Temp 52, 381–384 (2014). https://doi.org/10.1134/S0018151X14030146
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0018151X14030146