Abstract
The deflagration-to-detonation transition (DDT) is accompanied by a strong pressure wave that can provide an adverse effect on nearby structures. The pressure generated from multiple detonative pulses is strong enough to cause metal surface erosion and bulk edge chipping. In this work, we investigate the damaging effect of the DDT phenomena and apply hydrocode simulation to evaluate the structural damage to a pulverized coal injector made of copper used in a pulverized coal-oxygen combustion furnace. Experimental conditions are imposed to improve the damage model of a metal injector exposed to multiple detonation pulses.
Similar content being viewed by others
References
A. M. Khokhlov, E. S. Oran, and G. O. Thomas, “Numerical simulation of deflagration-to-detonation transition: the role of shock-flame interactions in turbulent flames,” Combust. Flame, 117, 323–339 (1999).
E. S. Oran and A. M. Khokhlov, “Deflagration, hot spots, and the transition to detonation,” Phil. Trans. Roy. Soc., London, 357, 3539–3551 (1999).
G. Ciccarelli and S. Dorofeev, “Flame acceleration and transition to detonation in ducts,” Prog. Energ. Combust. Sci., 34, 499–550 (2008).
M. Brouillette, “The Richtmyer-Meshkov instability,” Annu. Rev. Fluid Mech., 34, 445–468 (2002).
V. N. Gamezo, T. Ogawa, and E. S. Oran, “Flame acceleration and DDT in channels with obstacles: Effect of obstacle spacing,” Combust. Flame, 155, 302–315 (2008).
M. Kuznetsov, G. Ciccarelli, V. Dorofeev, et al., “DDT in methane-air mixtures,” Shock Waves, 12, 215–220 (2002).
S. Hluschko and G. Ciccarelli, “Interaction of high-speed combustion front with a closely packed bed of spheres,” Shock Waves, 18, 317–327 (2008).
A. V. Fedorov and T. A. Khmel’, “Mathematical simulation of heterogeneous detonation of coal dust in oxygen with allowance for the ignition stage,” Combust., Expl., Shock Waves, 41, No. 1, 78–87 (2005).
A. V. Fedorov and T. A. Khmel’ “Mathematical simulation of detonation processes in a coal-particle suspension,” Combust., Expl., Shock Waves, 38, No. 6, 700–708 (2002).
D. Edwards, P. Fearnley, and M. Nettleton, “Detonation limits of clouds of coal dust in mixtures of oxygen and nitrogen,” Combust., Expl., Shock Waves, 23, 239–245 (1987).
H. Watanabe and M. Otaka, “Numerical simulation of coal gasification in entrained flow coal gasifier,” Fuel, 85, 1935–1943 (2006).
C. Y. Tham, “Reinforced concrete perforation and penetration simulation using AUTODYN-3D,” Finite Elem. Anal. Des., 41, 1401–1410 (2005).
M. Katayama, A. Takeba, S. Toda, and S. Kibe, “Analysis of jet formation and penetration by conical shaped charge with the inhibitor,” Int. J. Impact Eng., 23, 443–454 (1999).
D. J. Steinberg, S. G. Cochran, and M. W. Guinan, “A constitutive model for metals applicable at high-strain rate,” J. Appl. Phys., 51, 1498–1504 (1980).
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Fizika Goreniya i Vzryva, Vol. 47, No. 4, pp. 92–99, July–August, 2011.
Rights and permissions
About this article
Cite this article
Gwak, Mc., Yoh, J.J. Simulation of the deflagration-to-detonation impact on a copper-based furnace injector. Combust Explos Shock Waves 47, 457–463 (2011). https://doi.org/10.1134/S0010508211040095
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0010508211040095