Abstract
We consider data acquisition and control system used in the test rig for measuring the center of gravity coordinates and inertia tensor of spacecrafts. Structure of the system is described. Technical specifications and metrological parameters are presented for the module which measures static and dynamic signals of strain gauge dynamometers and for the module which measures the signals of angular oscillation sensor installed on the test rig measuring platform; these oscillations are generated using electric motors and special control hardware. Finally, we describe the system software used to acquire and process the data and to display the measurement results.
Similar content being viewed by others
References
Blokin-Mechtalin, Y.K., Petronevich, V.V., and Chymachenco, E.K., IVK M2 Strain-Gage Measuring and Computational Complex, Datchiki i Sistemy, 2004, no. 3, pp. 14–17.
Blokin-Mechtalin, Y. K., Digital Strain-gauge Converters and Systems, Datchiki i Sistemy, 2009, no. 12, pp. 31–37.
Goncharenko, V.V., Blokin-Mechtalin, Yu.K., Makarov, P.A., et al, Measuring, Control and Computing System for a Wind Tunnel, Offits. Byull. Federal. Sluzh. Intel. Sobstv., Patent. Tovarnym Znakam, 2009, registr. number 84554.
Author information
Authors and Affiliations
Additional information
Original Russian Text © Yu.K. Blokin-Mechtalin, V.V. Bogdanov, I.N. Panchenko, V.V. Petronevich, V.A. Sabrekov, E.K. Chumachenko, 2010, published in Datchiki i Sistemy, 2010, No. 5, pp. 24–28.
Rights and permissions
About this article
Cite this article
Blokin-Mechtalin, Y.K., Bogdanov, V.V., Panchenko, I.N. et al. Test rig for measuring the center of gravity coordinates and inertia tensor of spacecrafts: Data acquisition and control system. Autom Remote Control 74, 679–683 (2013). https://doi.org/10.1134/S0005117913040103
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0005117913040103