Abstract
The effect of the Peierls stress on the ultimate tensile stress and uniform strain prior to the formation of a neck during stretching of metals and alloys with bcc structure is theoretically analyzed. The analysis is based on the equation for the variation of the dislocation density with deformation; this equation determines the shape of the work-hardening curve for a bcc material and the effect of the Peierls stress on the parameters of this equation (the annihilation coefficient for screw dislocations). Using the Considére condition for plastic instability of the neck type, the ultimate tensile stress and the magnitude of uniform strain are found theoretically as a function of the Peierls stress at different temperatures below 0.15T m , where T m is the melting temperature of the bcc metal. Theoretical results are illustrated with experimental data on the temperature dependences of the annihilation coefficients for screw dislocations and of the magnitude of uniform strain in molybdenum and Armco iron.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
G. A. Malygin, Fiz. Tverd. Tela (St. Petersburg) 47(2), 236 (2005) [Phys. Solid State 47, 246 (2005)].
V. Novak, S. Kadechkova, B. Sestak, and N. Zarubova, Cryst. Res. Technol. 19(6), 781 (1989).
R. Lachenmann and H. Schultz, Scr. Metall. 7(2), 155 (1973).
P. L. Pratt and F. Guin, Phys. Status Solidi 15(2), 539 (1966).
H. Mecking and U. F. Kocks, Acta Metall. 29(11), 1865 (1981).
Yu. Estrin and H. Mecking, Acta Metall. 32(1), 57 (1984).
G. A. Malygin, Fiz. Tverd. Tela (Leningrad) 29(7), 2067 (1987) [Sov. Phys. Solid State 29, 1189 (1987)].
G. A. Malygin, Phys. Status Solidi A 119(2), 423 (1990).
G. A. Malygin, Fiz. Tverd. Tela (St. Petersburg) 43(10), 1832 (2001) [Phys. Solid State 43, 1909 (2001)].
H. Conrad, in Proceedings of Conference on the Relation between the Structure and Mechanical Properties of Metals (Her Majestys Stationary Office, London, 1963; Metallurgiya, Moscow, 1967), p. 225.
Y. Nakada and A. S. Keh, Acta Metall. 16(7), 903 (1968).
D. F. Stein and J. R. Low, Acta Metall. 14(10), 1183 (1966).
P. Lewandowski, P. Chomel, and J. P. Cottu, Rev. Appl. Phys. 17(1), 9 (1982).
A. P. Kazantsev and V. L. Pokrovskii, Zh. Éksp. Teor. Fiz. 58(2), 677 (1970) [Sov. Phys. JETP 31, 362 (1970)].
G. A. Malygin, Fiz. Met. Metalloved. 58(2), 360 (1984).
G. A. Malygin, Fiz. Tverd. Tela (St. Petersburg) 34(9), 2882 (1992) [Sov. Phys. Solid State 34, 1543 (1992)].
R. Berner and G. Kronmüller, Plastische Verformung von Einkristallen (Springer, Berlin, 1965; Mir, Moscow, 1969).
N. I. Noskova, A. I. Zhuravleva, N. F. Vil’dinova, and I. A. Pereturina, Fiz. Met. Metalloved. 64(3), 554 (1987).
R. L. Fleischer and W. R. Hibbard, in Proceedings of Conference on the Relation between the Structure and Mechanical Properties of Metals (Her Majestys Stationary Office, London, 1963; Metallurgiya, Moscow, 1967), p. 85.
H. Conrad, in Ultrafine Grain in Metals (Syracuse Univ. Press, Syracuse, New York, 1970; Metallurgiya, Moscow, 1973).
R. P. Carreker and W. R. Hibbard, J. Met. 9(10), 1157 (1957).
Author information
Authors and Affiliations
Additional information
__________
Translated from Fizika Tverdogo Tela, Vol. 47, No. 5, 2005, pp. 870–875.
Original Russian Text Copyright © 2005 by Malygin.
Rights and permissions
About this article
Cite this article
Malygin, G.A. Structure factors that influence the stability of plastic strain of bcc metals under tensile load. Phys. Solid State 47, 896–902 (2005). https://doi.org/10.1134/1.1924852
Issue Date:
DOI: https://doi.org/10.1134/1.1924852