Skip to main content
Log in

The effect of electron beam fusion on the structure and properties of plasma jet sprayed nickel alloy coatings

  • Published:
Technical Physics Letters Aims and scope Submit manuscript

Abstract

Nickel-based alloy coatings were obtained on carbon steel (steel 3) samples by means of high-velocity pulsed plasma jet spraying of PG-10N-01 and PGAN-33 commercial powders, followed by electron beam fusion of the coating and substrate. The coated samples were studied by methods of X-ray diffraction, scanning electron microscopy, and electron-beam microprobe (energy-dispersive X-ray spectroscopy) and tested for hardness, friction wear, corrosion resistance, and adhesion. It was found that the electron beam processing leads to an almost tenfold increase in the friction wear resistance, a threefold growth in microhardness (relative to that of the substrate), and a significant increase in the resistance to corrosion in acid media. The observed increase in the working characteristics is related to changes in the phase composition, grain structure refinement, and redistribution of alloy components in the substrate and film and a decrease in porosity of the coating material.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. A. D. Pogrebnjak and N. I. Shumakova, Surf. Coat. Technol. 122, 163 (1999).

    Article  Google Scholar 

  2. A. D. Pogrebnjak, S. N. Bratushka, V. I. Boyko, et al., Nucl. Instrum. Methods 145, 373 (1998).

    Google Scholar 

  3. A. D. Pogrebnjak, A. P. Kobzev, B. P. Critsentko, et al., J. Appl. Phys. 87, 2142 (2000).

    Article  ADS  Google Scholar 

  4. A. D. Pogrebnyak, O. P. Kul’ment’eva, V. S. Kshnyakin, et al., Poverkhnost 6, 36 (2003).

    Google Scholar 

  5. S. Kuroda, in Proceedings of the 15th International Thermal Spray Conference, Nice, 1998, p. 539.

  6. A. I. Zverev, S. Yu. Sharivker, and E. A. Astakhov, Detonation Deposition of Coatings (Sudostroenie, Leningrad, 1979) [in Russian].

    Google Scholar 

  7. A. D. Pogrebnyak, Yu. N. Tyurin, and Yu. F. Ivanov, Pis’ma Zh. Tekh. Fiz. 26(21), 53 (2000) [Tech. Phys. Lett. 26, 960 (2000)].

    Google Scholar 

  8. A. D. Pogrebnyak, M. V. Il’yashenko, V. S. Kshnyakin, et al., Zh. Tekh. Fiz. 71(7), 111 (2001) [Tech. Phys. 46, 897 (2001)].

    Google Scholar 

  9. Yu. N. Tyurin and A. D. Pogrebniak, Surf. Coat. Technol. 111, 269 (1999).

    Article  Google Scholar 

  10. P. Misaelides, A. D. Pogrebnjak, A. Hatzidimitrioun, et al., in Proceedings of European Materials Research Society, Strasbourg, 2003 (in press).

Download references

Author information

Authors and Affiliations

Authors

Additional information

__________

Translated from Pis’ma v Zhurnal Tekhnichesko\(\overset{\lower0.5em\hbox{$\smash{\scriptscriptstyle\smile}$}}{l} \) Fiziki, Vol. 30, No. 4, 2004, pp. 78–86.

Original Russian Text Copyright © 2004 by Pogrebnyak, Vasilyuk, Alontseva, Kravchenko, Ruzimov, Tyurin.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Pogrebnyak, A.D., Vasilyuk, V.V., Alontseva, D.L. et al. The effect of electron beam fusion on the structure and properties of plasma jet sprayed nickel alloy coatings. Tech. Phys. Lett. 30, 164–167 (2004). https://doi.org/10.1134/1.1666972

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1134/1.1666972

Keywords

Navigation