Abstract
The amplification of an optical signal in an erbium-and ytterbium-doped fiber saturation-mode amplifier is considered. Analytical distributions of the inverse population, pump power, and signal intensity along an active light guide are derived. Spectral dependences of the saturation power and amplification threshold are obtained for different mode sizes of the radiation and ytterbium-to-erbium active ion ratios. The optimal active-fiber length is calculated.
Similar content being viewed by others
References
E. Desurvire, Erbium-Doped Fiber Amplifiers Principles and Applications (Wiley, New York, 1994).
C. Barnard, P. Myslinski, J. Chrostowski, and M. Kavehrad, IEEE J. Quantum Electron. 30, 1817 (1994).
F. Sanchez, B. Mezianei, T. Chartier, et al., Appl. Opt. 34, 7674 (1995).
A. Hardy and R. Oron, IEEE J. Quantum Electron. 33, 307 (1997).
I. Kelson and A. Hardy, IEEE J. Quantum Electron. 34, 1570 (1998).
M. Karasek, IEEE J. Quantum Electron. 33, 1699 (1997).
M. Fedrighi and F. Di Pasquale, IEEE Photonics Technol. Lett. 7, 303 (1995).
A. M. Burshtein, Avtometriya, No. 5, 65 (1978).
V. P. Gapontsev and N. S. Platonov, Mater. Sci. Forum 51, 165 (1989).
Author information
Authors and Affiliations
Additional information
__________
Translated from Zhurnal Tekhnichesko\(\overset{\lower0.5em\hbox{$\smash{\scriptscriptstyle\smile}$}}{l} \) Fiziki, Vol. 73, No. 10, 2003, pp. 93–96.
Original Russian Text Copyright © 2003 by Golyshev.
Rights and permissions
About this article
Cite this article
Golyshev, V.Y. Analytical model of an ytterbium-erbium fiber saturating amplifier. Tech. Phys. 48, 1311–1314 (2003). https://doi.org/10.1134/1.1620126
Received:
Issue Date:
DOI: https://doi.org/10.1134/1.1620126