Abstract
A description is given of the design, fabrication technology, and characteristics of a sensor for a scanning magnetic microscope using a thin-film dc SQUID with Nb/Al2O3/Nb shunted Josephson tunnel junctions. It is shown that at a sample temperature of 4.2 K the spatial resolution of this detector is 10 µm with a field resolution of 70 pT/Hz1/2.
Similar content being viewed by others
References
M. Jeffery, T. Van Duzer, J. R. Kirtley, and M. B. Ketchen, Appl. Phys. Lett. 67, 1769 (1995).
C. C. Tsuei, J. R. Kirtley, M. Rupp et al., Science 271, 329 (1996).
M. B. Ketchen, J. R. Kirtley, and M. Bhushan, IEEE Trans. Appl. Supercond. AS-7, 3139 (1997).
D. E. Kirichenko, A. B. Pavolotskij, I. G. Prokhorova et al., Inst. Phys. Conf. Ser. 158, 727 (1997).
C. D. Tesche and J. Clarke, J. Low Temp. Phys. 29, 301 (1977).
K. Enpuku and H. Koch, Jpn. J. Appl. Phys. 32, 3811 (1993).
K. Enpuku, R. Cantor, and H. Koch, J. Appl. Phys. 71, 2338 (1992).
Author information
Authors and Affiliations
Additional information
Zh. Tekh. Fiz. 69, 112–117 (July 1999)
Rights and permissions
About this article
Cite this article
Kirichenko, D.E., Pavolotskii, A.B., Prokhorova, I.G. et al. Characteristics of a thin-film sensor for a scanning SQUID microscope. Tech. Phys. 44, 839–843 (1999). https://doi.org/10.1134/1.1259360
Received:
Issue Date:
DOI: https://doi.org/10.1134/1.1259360