Advertisement

Inorganic Materials: Applied Research

, Volume 10, Issue 6, pp 1456–1460 | Cite as

Managing Welded Joint Formation at Electron-Beam Welding of Aluminum Alloys of Increased Thicknesses

  • N. I. SharonovEmail author
  • M. G. Sharapov
WELDING AND ALLIED PROCESSES. WELDING CONSUMABLES AND TECHNOLOGIES
  • 1 Downloads

Abstract—The technology of electron beam welding of homogeneous and dissimilar welds of aluminum alloys 1561, 1560М, and 1980T1 has been developed. Beam scanning along the semielliptical trajectory has secured the quality of the welded parts with fine mechanical properties. The welding scheme and optimal modes have been determined. The results of mechanical and corrosion tests, as well as the results of the delayed failure tests, are presented. The technology is implemented for hydrofoil devices and for the manufacture of shipbuilding machinery components.

Keywords:

electron beam welding aluminum alloys scanning electron beam welds mechanical properties corrosion tests delayed failure 

Notes

REFERENCES

  1. 1.
    Gorbach, V.D., Suzdalev, I.V., and Sharapov, M.G., The general problems of plasma-arc welding of aluminum alloys: current problems and their solutions, Vestn. Tekhnol. Sudostr. Sudorem., 2010, no. 18, pp. 29–39.Google Scholar
  2. 2.
    Bondarev, A.A., Rabkin, D.M., and Kuzmenok, O.S., Weldability of AlMg6 alloy by electron beam in various spatial positions, Avtom. Svarka, 1976, no. 12, pp. 34 –37.Google Scholar
  3. 3.
    Ol’shanskaya, T.V. and Yazovskikh, V.Ya., Effect of beam development on the formation of the macrostructure of the weld metal in electron-beam welding with deep penetration, Vestn. Povolzh. Gos. Tekhnol. Univ., 1999, no. 2, pp. 225–230.Google Scholar
  4. 4.
    Bayakin, S.G., Laptenok, V.D., and Ugryumov, V.G., Analysis and optimization of the welding by a scanning electron beam, Materialy konferentsii “Elektronno-luchevaya svarka” (Proc. Conf. “Electron-Beam Welding”), Moscow, 1986, pp. 43–48.Google Scholar
  5. 5.
    Kaidalov, A.A., Elektronno-luchevaya svarka i smezhnye tekhnologii (Electron-Beam Welding and Related Technologies), Kiev: Ekotekhnologiya, 2004, 2nd ed.Google Scholar
  6. 6.
    Sharonov, N.I. and Vikhman, V.B., The fundamentals of the technology of ELS aluminum alloy AMG61 (1561) with semielliptical scanning, Materialy Sankt-Peterburgskoi mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Tekhnologiya i oborudovanie ELS-2014,” 24–26 iyunya 2014 g. (Proc. St. Petersburg Int. Sci.-Tech. Conf. “Technology and Equipment ELS-2014,” June 24–26, 2014), St. Petersburg: S.-Peterb. Gos. Politekh. Univ., 2014, pp. 111–120.Google Scholar
  7. 7.
    Akop’yants, K.S., Preventing the formation of root defects in electron-beam welding, Avtom. Svarka, 1984, no. 6, pp. 59–61.Google Scholar
  8. 8.
    Belen’kii, V.Ya., Scanning of the electron beam along the X-shaped trajectory, as a means of reducing defects in the deep seam in electron-beam welding, Avtom. Svarka, 1986, no. 9, pp. 35–37.Google Scholar
  9. 9.
    Sharonov, N.I., Ziger, A.Z., and Nikitina, I.V., Thermal processes in the near-weld zone at the ELS of the aluminum alloy AMG61 (1561) with semielliptical scanning, Materialy Sankt-Peterburgskoi mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Tekhnologiya i oborudovanie ELS-2014,” 24–26 iyunya 2014 g. (Proc. St. Petersburg Int. Sci.-Tech. Conf. “Technology and Equipment ELS-2014,” June 24–26, 2014), St. Petersburg: S.-Peterb. Gos. Politekh. Univ., 2014, pp. 121–125.Google Scholar
  10. 10.
    Bashenko, V.V. and Sharonov, N.I., Properties of welded joints of pressed-stamped aluminum alloys, Materialy Sankt-Peterburgskoi mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Tekhnologiya i oborudovanie ELS-2014,” 24–26 iyunya 2014 g. (Proc. St. Petersburg Int. Sci.-Tech. Conf. “Technology and Equipment ELS-2014,” June 24–26, 2014), St. Petersburg: S.-Peterb. Gos. Politekh. Univ., 2014, pp. 66–70.Google Scholar
  11. 11.
    Makarov, A.G. and Petrov, G.L., Possible delayed fractures of welded joints from aluminum–zinc–magnesium alloys, in Svarka (Welding), Leningrad: Sudostroenie, 1965, no. 8.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  1. 1.National Research Center UralVagonZavod—JSC Central Research Institute of MaterialsSt. PetersburgRussia
  2. 2.National Research Center Kurchatov Institute—CRISM PrometeySt. PetersburgRussia

Personalised recommendations