Advertisement

Synthesis and Inhibition Behavior of the Quaternary Ammonium Salt-type Tetrameric Surfactant for Corrosion of N80 Steel in HCl Medium

  • Jie LiEmail author
  • Yangchun Xie
  • Wenhui Li
  • Ruihua Zhu
  • Wengxiang Wu
PHYSICOCHEMICAL PROBLEMS OF MATERIALS PROTECTION
  • 1 Downloads

Abstract

The quaternary ammonium salt-type tetrameric surfactant with hydrocarbon chain length of 12 was synthesized, and characterized using FT-IR and 1H NMR. The inhibition efficiencies for N80 steel in 20% hydrochloric acid were studied by weight loss, potentiodynamic polarization method, electrochemical impedance spectroscopy at 25°C. The results obtained from weigh loss measurements show that it has good inhibitive performance. Polarization data indicates that it acts as a mixed-type inhibitor. The results obtained from EIS exhibit the protective film formed by the adsorption of surfactant molecules on metal surface. The adsorption behavior of surfactants was found to follow the Langmuir adsorption isotherm.

Keywords:

tetrameric surfactant quaternary ammonium salt synthesis corrosion inhibition adsorption 

Notes

ACKNOWLEDGMENTS

The work was supported by the National Natural Science Foundation of China (grant no. 51074033)

REFERENCES

  1. 1.
    Menger, F.M. and Littau, C.A., J. Am. Chem. Soc., 1991, vol. 113 pp. 1451–1452.CrossRefGoogle Scholar
  2. 2.
    Menger, F.M. and Littau, C.A., J. Am. Chem. Soc., 1993, vol. 115, pp. 10083–10090.CrossRefGoogle Scholar
  3. 3.
    Rosen, M.J. and Tracy, D.J., J. Surfactants Deterg., 1998, vol. 1, pp. 547–554.CrossRefGoogle Scholar
  4. 4.
    Kabir, D., Siddiqui, U.S., Kumar, S., and Dar, A.A., Colloid Polym. Sci., 2006, vol. 284, pp. 807–812.CrossRefGoogle Scholar
  5. 5.
    Zana, R., J. Colloid Interface Sci., 2002, vol. 248, pp. 203–220.CrossRefGoogle Scholar
  6. 6.
    Ge, Y.S., Tai, S.X., Xu, Z.Q., Lai, L., Tian, F.F., Li, D.W., Jiang, F.L., Liu, Y., and Gao, Z.N., Langmuir, 2012, vol. 28, pp. 5913–5920.CrossRefGoogle Scholar
  7. 7.
    Zhang, S.S., Yu, J., Wu, J.Z., Tong, W., Lei, Q.F., and Fang, W.J., J. Chem. Eng. Data, 2014, vol. 59, pp. 2891–2900.CrossRefGoogle Scholar
  8. 8.
    Fan, Y.X., Hou, Y.B., Xiang, J.F., Yu, D.F., Wu, C.X., Tian, M.Z., Han, Y.C., and Wang, Y.L., Langmuir, 2011, vol. 27, pp. 10570–10579.CrossRefGoogle Scholar
  9. 9.
    Koya, P.A., Wagay, T.A., and Ismail, K., J. Mol. Liq., 2016, vol. 219, pp. 505–512.CrossRefGoogle Scholar
  10. 10.
    Yoshimura, T., Yoshida, H., Ohno, A., and Esumi, K., J. Colloid Interface Sci., 2003, vol. 267, pp. 167–172.CrossRefGoogle Scholar
  11. 11.
    Laschewsky, A., Wattebled, L., Arotcarena, M., Habib-Jiwan, J.L., and Rakotoaly, R.H., Langmuir, 2005, vol. 21, pp. 7170–7179.CrossRefGoogle Scholar
  12. 12.
    Marcelo, C.M., María, I.C., Javier, F.G., and Ricardo, J.G., Colloids Surf., A, 2005, vol. 262, pp. 1–7.CrossRefGoogle Scholar
  13. 13.
    Yoshimura, T., Kimura, N., Onitsuka, E., Shosenji, H., and Esumi, K., J. Colloid Interface Sci., 2003, vol. 7, pp. 67–74.Google Scholar
  14. 14.
    Yang, F., Li, G., Qi, J., Zhang, S.M., and Liu, R., Appl. Surf. Sci., 2010, vol. 257, pp. 312–318.CrossRefGoogle Scholar
  15. 15.
    Lagrenée, M., Mernari, B., Bouanis, M., Traisnel, M., and Bentiss, F., Corros. Sci., 2002, vol. 44, pp. 573–588.CrossRefGoogle Scholar
  16. 16.
    Soliman, S.A., Metwally, M.S., Selim, S.R., Bedair, M.A., and Abbas, M.A., J. Ind. Eng. Chem., 2014, vol. 20, pp. 4311–4320.CrossRefGoogle Scholar
  17. 17.
    Abd El-Lateef, H.M., Abo-Riya, M.A., and Tantawy, A.H., Corros. Sci., 2016, vol. 108, pp. 94–110.CrossRefGoogle Scholar
  18. 18.
    Hegazy, M.A., Badawi, A.M., Abd El Rehim, S.S., and Kamel, W.M., Corros. Sci., 2013, vol. 69, pp. 110–122.CrossRefGoogle Scholar
  19. 19.
    Al-Sabagh, A.M., Nasser, N.M., El-Azabawy, O.E., and El-Tabey, A.E., J. Mol. Liq., 2016, vol. 219, pp. 1078–1088.CrossRefGoogle Scholar
  20. 20.
    Popova, A., Christov, M., and Vasilev, A., Corros. Sci., 2011, vol. 53, pp. 1770–1777.CrossRefGoogle Scholar
  21. 21.
    Li, X.H., Deng, S.D., and Fu, H., Corros. Sci., 2011, vol. 53, pp. 302–309.CrossRefGoogle Scholar
  22. 22.
    Free, M.L., Corros. Sci., 2002, vol. 44, pp. 2865–2870.CrossRefGoogle Scholar
  23. 23.
    Free, M.L., Wang, W., and Ryu, D.Y., Corrosion, 2004, vol. 60, pp. 837–844.CrossRefGoogle Scholar
  24. 24.
    Achouri, M.E., Infante, M.R., Izquierdo, F., et al., Corros. Sci., 2001, vol. 43, pp. 19–35.CrossRefGoogle Scholar
  25. 25.
    Zana, R.J., J. Colloid Interface Sci., 2002, vol. 248, pp. 203–220.CrossRefGoogle Scholar
  26. 26.
    Yoshimura, T., Yoshida, H., Ohno, A., et al., J. Colloid Interface Sci., 2003, vol. 267, pp. 167–172.CrossRefGoogle Scholar
  27. 27.
    Tawfik, S.M., J. Mol. Liq., 2015, vol. 207, pp. 185–194.CrossRefGoogle Scholar
  28. 28.
    Azzam, E.M.S., Hegazy, M.A., Kandil, N.G., Badawi, A.M., and Sami, R.M., Egypt. J. Pet., 2015, vol. 24, pp. 493–503.Google Scholar
  29. 29.
    Liu, X. and Zheng, Y.G., Corros. Eng., Sci. Technol., 2008, vol. 43, pp. 87–92.CrossRefGoogle Scholar
  30. 30.
    Abd El-Maksoud, S.S. and Hassan, H.H., Mater. Corros., 2007, vol. 58, pp. 369–375.CrossRefGoogle Scholar
  31. 31.
    Aiad, I., El-Sukkary, M.M., Soliman, E.A., El-Awady, M.Y., and Shaban, S.M., J. Ind. Eng. Chem., 2014, vol. 20, pp. 3524–3535.CrossRefGoogle Scholar
  32. 32.
    Ferreira, E.S., Giancomelli, C., Giacomelli, F.C., and Spinelli, A., Mater. Chem. Phys., 2004, vol. 83, pp. 129–134.CrossRefGoogle Scholar
  33. 33.
    Li, W.H., He, Q., Pei, C.L., and Hou, B.R., J. Appl. Electrochem., 2008, vol. 38, pp. 289–295.CrossRefGoogle Scholar
  34. 34.
    Shaban, S.M., Abd-Elaal, A.A., and Tawfik, S.M., J. Mol. Liq., 2016, vol. 216, pp. 392–400.CrossRefGoogle Scholar
  35. 35.
    Shaban, S.M., Aiad, I., El-Sukkary, M.M., Soliman, E.A., and El-Awady, M.Y., J. Mol. Liq., 2015, vol. 203, pp. 20–28.CrossRefGoogle Scholar
  36. 36.
    Li, X.H., Deng, S.D., and Fu, H., Corros. Sci., 2012, vol. 55, pp. 280–288.CrossRefGoogle Scholar
  37. 37.
    Pankaj, P., Arifa, S., and Ishtiaque, A., J. Surfactants Deterg., 2013, vol. 16, pp. 49–56.CrossRefGoogle Scholar
  38. 38.
    Badr, G.E., Corros. Sci., 2009, vol. 51, pp. 2529–2536.CrossRefGoogle Scholar
  39. 39.
    Abbasov, V.M., Abd El-Lateef, H.M., Aliyeva, L.I., Qasimov, E.E., Ismayilov, I.T., and Khalaf, M.M., Egypt. J. Pet., 2013, vol. 22, pp. 451–470.Google Scholar
  40. 40.
    Moretti, G., Guidi, F., and Grion, G., Corros. Sci., 2004, vol. 46, pp. 387–403.CrossRefGoogle Scholar
  41. 41.
    Martinez, S. and Stern, I., Appl. Surf. Sci., 2002, vol. 199, pp. 83–89.CrossRefGoogle Scholar
  42. 42.
    Szklarska-Smialowska, Z. and Mankowski, J., Corros. Sci., 1978, vol. 18, pp. 953–960.CrossRefGoogle Scholar
  43. 43.
    Yurt, A., Ulutas, S., and Dal, H., Appl. Surf. Sci., 2006, vol. 253, pp. 919–925.CrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  • Jie Li
    • 1
    Email author
  • Yangchun Xie
    • 1
  • Wenhui Li
    • 2
  • Ruihua Zhu
    • 1
  • Wengxiang Wu
    • 3
  1. 1.College of Chemistry and Chemical Engineering, Northeast Petroleum UniversityDaqingP.R. China
  2. 2.Planning and Design institute,the ninth oil production plant of Daqing oilfield company LtdDaqingP.R. China
  3. 3.College of Petroleum Engineering, Northeast Petroleum UniversityDaqingP.R. China

Personalised recommendations