Advertisement

Polymer Science, Series D

, Volume 12, Issue 1, pp 91–95 | Cite as

A New Approach to Determination of the Suction Ratio in Calculation of the Thickness Difference of Thermally Formed Products

  • V. D. Safonova
  • M. A. SheryshevEmail author
  • A. E. Sheryshev
Article
  • 5 Downloads

Abstract

An analytical approach to the determination of the suction ratio in the calculation of the thickness difference of thermally formed products is demonstrated by the example of the free and negative methods of axisymmetric products.

Keywords: thermoforming thickness difference suction ratio clamping frames article being formed sheet stocking high-elasticity state model 

Notes

REFERENCES

  1. 1.
    N. I. Baurova, “Influence of nanostructured defects in carbon fibers and ribbons on sensor properties,” Polym. Sci., Ser. D 4 (3), 242–245 (2011).Google Scholar
  2. 2.
    N. I. Baurova, “A method of imitational modeling that permits optimizing the properties of polymeric composite materials,” Polym. Sci., Ser. D 6 (3), 265–268 (2013).Google Scholar
  3. 3.
    V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “A study of structure formation in a binder depending on the surface microrelief of carbon fiber,” Polym. Sci., Ser. D 9 (3), 286–289 (2016).Google Scholar
  4. 4.
    T. Zehev and G. Costas, Gogos Principles of Polymer Processing, 2nd ed. (John Wiley & Sons, Inc. Publication, New Jersey, 2006).Google Scholar
  5. 5.
    M. A. Sheryshev, Polymer Processing Technology: Products from Polymer Sheets and Films, 2nd ed. (Yurait, Moscow, 2017), Part 2 [in Russian].Google Scholar
  6. 6.
    Handbuch der Plasttechnik, Ed. by von W. Broy and N. I. Basov (VEB Deutscher Verlag fur Grundstoffindustrie, Leipzig, 1985).Google Scholar
  7. 7.
    P. Schwarzmann, Thermoforming: A Practical Guide, Ed. by A. Illig (Carl Hanser Verlag GmbH & Co., Munich, 2001).Google Scholar
  8. 8.
    E. A. Volkov, Numerical Methods: Textbook for Universities (Nauka. Gl. red. fiz.-mat., Moscow, 1987) [in Russian].Google Scholar
  9. 9.
    D. Tien Mo Shih, Numerical Heat Transfer (CRC Press, Moscow, 1988) [in Russian].Google Scholar
  10. 10.
    J. M. McKelvey, Polymer. Processing (John Wiley & Sons, New York–London, 1962).Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  • V. D. Safonova
    • 1
  • M. A. Sheryshev
    • 1
    Email author
  • A. E. Sheryshev
    • 2
  1. 1.Mendeleev Russian Chemico-Technological UniversityMoscowRussia
  2. 2.Moscow Aviation Institute National Research InstituteMoscowRussia

Personalised recommendations