Polymer Science, Series D

, Volume 12, Issue 1, pp 85–90 | Cite as

The Stress–Strain State of Structurally Anisotropic Panels from Composite Materials under Force and Process Temperature Exposure

  • B. V. BoitsovEmail author
  • L. M. Gavva
  • Yu. N. Pugachev


Realization of a quality concept and a system qualitative approach to the calculation and design of perspective articles of aeronautical equipment from modern composite materials are key problems for maintaining the quality of the production in aerospace field. A mathematical model for the study of stress–strain state of structurally anisotropic panels from composite materials has been developed. A mathematical model of a reinforcing element during torsional motion at one-side contact with skin has been updated. The effect of the technology on the panel design is considered, namely, residual temperature stresses and preliminary tension of reinforcing fibers. An octic resolving equation and natural boundary conditions have been plotted on the basis of the Lagrange variation principle. A set of exact analytical solutions of boundary problems in single trigonometric series is considered. An application software package has been developed in the MATLAB operating environment. The effect of construction parameters on the degree of stresses and displacements has been analyzed.


panels from composite materials eccentric longitudinal-transverse framing thin-wall bar irregular framing structure force and process temperature exposure Lagrange variation principle stress–strain state single trigonometric series MATLAB 



  1. 1.
    P. Cerracchio, M. Gherlone, and A. Tessler, “Real-time displacement monitoring of a composite stiffened panel subjected to mechanical and thermal loads,” Meccanica 50 (10), 2487–2496 (2015).Google Scholar
  2. 2.
    M. Celkovic, “Thermo-mechanical bending of laminated composite and sandwich plates using layerwise displacement model,” Compos. Struct. 125, 388–399 (2015).Google Scholar
  3. 3.
    N. I. Baurova and V. A. Zorin, Technological Heredity in the Production of Machine Parts from Polymer Composite Materials. Monograph (Mosk. Avtomob.-Dorozh. Gos. Tekh. Univ., Moscow, 2018) [in Russian].Google Scholar
  4. 4.
    Yu. I. Dimitrienko and D. O. Yakovlev, “Asymptotic theory of thermoelasticity of multilayer composite plates,” Mekh. Kompozits. Mater. Konstr., No. 2, 259–282 (2014).Google Scholar
  5. 5.
    O. G. Osyaev, Yu. A. Taturin, A. M. Kostin, and A. V. Zhukov, “Multilevel model for analyzing the strength of structures from polymer composites under multifactorial loading,” Vestn. Donskogo Gos. Tekh. Univ. 11 (5), 613–620 (2011).Google Scholar
  6. 6.
    M. Petrolo and A. Lamberti, “Axiomatic/asymptotic analysis of refined layer-wise theories for composite and sandwich plates,” Mech. Adv. Mater. Struct. 23 (1), 28–42 (2016).Google Scholar
  7. 7.
    A. A. Dudchenko, Calculation of the Stress-Strain State of Elements of Aircraft Missile and Machine-Building Structures Made of Composite Materials (Fed. Inf. Sist., Moscow, 2013) [in Russian].Google Scholar
  8. 8.
    M. I. Martirosov, “Mathematical modeling of deforming and fracture of panels from polymer composite materials using the finite element method,” in Proc. 21 Gorshkov International Symposium Dynamic and Technological Problems of Mechanics of Structures and Continuous Media, Vyatichi, February 16–29, 2015 (2015), Vol. 1, pp. 133–134.Google Scholar
  9. 9.
    I. A. Buyanov, M. Yu. Rostovtsev, and V. V. Shelofast, “Validation of the system of engineering analysis of composite structures on the example of calculating the natural frequencies of antisymmetric laminate plates,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 4, 149–154 (2016).Google Scholar
  10. 10.
    T. Yu. Gainutdinova and R. R. Mirkhazov, “Software complex of automated design calculation of thin-walled structures made of composite materials,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 4, 7–11 (2011).Google Scholar
  11. 11.
    V. I. Khaliulin and V. V. Batrakov, “Analysis of the application of innovative methods for the production of integrated structures made of composites,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 3, 129–133 (2016).Google Scholar
  12. 12.
    F. A. Urazbakhtin, Yu. Yu. Kharinova, and V. A. Bolonkin, “The limiting states in the process of fiberglass curing,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 3, 79–85 (2015).Google Scholar
  13. 13.
    S. K. D. Nath and A. M. Afsar, “Analysis of the effect of fiber orientation on the elastic field in a stiffened orthotropic panel under uniform tension using displacement potential approach,” Mech. Adv. Mater. Struct. 16 (4), 300–307 (2011).Google Scholar
  14. 14.
    A. V. Chernyaev, Discrete optimization of elements of aircraft structures made of composite materials, in Proc. 10th All-Russian Congress on the Fundamental Problems of Theoretical and Applied Mechanics (Nizhny Novgorod, 2011), p. 207.Google Scholar
  15. 15.
    A. Sh. Kusyakov, “Designing thin plates that work for stability and strength,” Probl. Mekh. Upr., No. 45, 30–38 (2013).Google Scholar
  16. 16.
    V. V. Chedrik and S. A. Tuktarov, The method of global-local calculation and optimization of aircraft structures made of composite materials, in Proc. 11th All-Russian Congress on the Fundamental Problems of Theoretical and Applied Mechanics (Kazan, 2015), p. 298.Google Scholar
  17. 17.
    P. A. Shataev, “Calculation of composite structures in the design formulation,” Probl. Nelineinogo Anal. Inzh. Sist. 19 (2), 54–72 (2013).Google Scholar
  18. 18.
    S. A. Tuktarov and V. V. Chedrik, “Some aspects of modeling the compositional caisson of the large-elongated wing by an anisotropic beam,” Uch. Zap. Tsentr. Aerogidrodin. Inst. 46 (3), 70–84 (2015).Google Scholar
  19. 19.
    V. I. Khaliulin, P. A. Khilov, and D. M. Toroptsova, “On the prospects for the use of TFP-technology in the production of aircraft composite parts,” Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., No. 4, 127–132 (2015).Google Scholar
  20. 20.
    B. V. Boitsov and L. M. Gavva, “Parametric analysis of the stress-strain state of structurally anisotropic panels made of composite materials. A mathematical model,” Kach. Zhizn’, No. 2, 84–89 (2017).Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  • B. V. Boitsov
    • 1
    Email author
  • L. M. Gavva
    • 1
  • Yu. N. Pugachev
    • 1
  1. 1.Moscow Aviation University (National Research University)MoscowRussia

Personalised recommendations