Advertisement

Polymer Science, Series D

, Volume 11, Issue 4, pp 440–442 | Cite as

Distinctive Features of Surface Preparation for Gluing in Arctic Conditions

  • A. Yu. Konoplin
  • N. I. Baurova
Article
  • 7 Downloads

Abstract

The technical properties of solvents used in the surface preparation for gluing (cleaning and degreasing) at negative temperatures are evaluated. The properties of solvents most sensitive to a decrease in temperature are described. The types of solvents that can be can be used for the surface preparation for gluing in the Arctic conditions are established.

Keywords:

glue glued joint frost resistance surface preparation 

Notes

REFERENCES

  1. 1.
    N. I. Baurova and A. Yu. Konoplin, “Optimization of quality parameters in the repair of road-building machines according to the adhesives technology,” Remont Vosstanov. Modernizatsiya, No. 2, 37–41 (2016).Google Scholar
  2. 2.
    A. Yu. Konoplin and N. I. Baurova, “Choosing materials for weld bonded joints,” Polym. Sci., Ser. D 8 (1), 62–65 (2015).Google Scholar
  3. 3.
    V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Capillary hydrodynamics of oligomer binders,” Polym. Sci., Ser. D 9 (3), 322–332 (2016).Google Scholar
  4. 4.
    A. K. Shvedkova, A. P. Petrova, and V. M. Buznik, “Climate resistance of composite materials based on adhesive prepregs under Arctic conditions,” Polym. Sci., Ser. D 9 (2), 165–171 (2016).Google Scholar
  5. 5.
    N. V. Lapina, “Methods and standards for the determination of frost resistance of polymeric materials,” Vse Mater., Entsikl. Sprav., No. 2, 65–69 (2017).Google Scholar
  6. 6.
    A. P. Petrova, I. A. Sharova, N. F. Lukina, and V. M. Buznik, “The applicability of adhesives in Arctic conditions,” Polym. Sci., Ser. D 9 (2), 188–194 (2015).Google Scholar
  7. 7.
    Y. Y. Shimina and G. V. Malysheva, “Determination of failure-free operation probability in adhesive joints at high temperatures,” Polym. Sci., Ser. D 8 (3), 207–210 (2015).Google Scholar
  8. 8.
    N. I. Baurova and A. Y. Sergeev, “Application of differential-scanning calorimetry for studying the properties of filled adhesive materials,” Polym. Sci., Ser. D 7 (2), 140–144 (2014).Google Scholar
  9. 9.
    N. I. Baurova, V. A. Zorin, and V. M. Prikhod’ko, “Taking into account the factors of technological heredity by technological mechanics,” Polym. Sci., Ser. D 9 (4), 402–406 (2016).Google Scholar
  10. 10.
    N. I. Baurova, “A method of imitation modeling that permits optimizing the properties of polymeric composite materials,” Polym. Sci., Ser. D 6 (3), 265–268 (2013).Google Scholar
  11. 11.
    L. G. Petrova and O. V. Chudina, “Methodology of control of structure formation for development of hardening processes,” Met. Sci. Heat Treat. 52 (5), 219 (2010).CrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Ltd. 2018

Authors and Affiliations

  1. 1.Moscow Automobile and Road Construction State Technical UniversityMoscowRussia

Personalised recommendations