Advertisement

Physics of Particles and Nuclei Letters

, Volume 15, Issue 7, pp 967–968 | Cite as

The Development of High Sensitive Differential Amplifiers for Q-Measurement System

  • E. V. Gorbachev
  • A. E. Kirichenko
  • D. V. MonakhovEmail author
  • S. V. Romanov
  • V. I. Volkov
Control and Diagnostic Systems
  • 5 Downloads

Abstract

A few improvements have been made in order to enhance the resolution of the Q-measurement system such as development of the new amplification system for picking up signals. It was developed using diode detection technique, analog filtering and real-time gain adjusting to allow carry out measurements during beam injection and acceleration. Results and tests performed with the Nuclotron beam are presented.

References

  1. 1.
    F. Zimmermann, “Measurement and correction of accelerator optics,” SLAC-PUB-7844 (Stanford Linear Accelerator Center, Stanford Univ., Stanford, CA, 1998).Google Scholar
  2. 2.
    M. Gasior and R. Jones, “High sensitivity tune measurement by direct diode detection,” in Proceedings of the 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators DIPAC, 2005, Lyon, France, CTWA01.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2018

Authors and Affiliations

  • E. V. Gorbachev
    • 1
  • A. E. Kirichenko
    • 1
  • D. V. Monakhov
    • 1
    Email author
  • S. V. Romanov
    • 1
  • V. I. Volkov
    • 1
  1. 1.Joint Institute for Nuclear ResearchDubna, Moscow oblastRussia

Personalised recommendations