Advertisement

Russian Journal of Applied Chemistry

, Volume 91, Issue 9, pp 1441–1450 | Cite as

Corrosion Behavior in Acid and Alkaline Media of Nickel Coatings Deposited at Room Temperature

  • I. V. Makarova
  • D. S. Kharitonov
  • I. B. Dobryden’
  • A. A. Chernik
Applied Electrochemistry and Metal Corrosion Protection
  • 3 Downloads

Abstract

Impedance spectroscopy, chronovoltammetry, chronopotentiometry, scanning electron microscopy, and atomic-force microscopy were used to examine the corrosion behavior in acid and alkaline media and the morphology of nickel coatings electrodeposited from acetate, tartrate, and isobutyrate electrolytes at a temperature of 20–25°C. Models describing the nickel corrosion processes in H2SO4 and NaOH solutions were suggested. It was found that nickel coatings formed from isobutyrate electrolytes have the highest corrosion resistance.

Keywords

nickel plating electrochemical impedance spectroscopy atomic-force microscopy 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Legkaya, D.A., Solov’eva, N.D., and Yakovlev, A.V., Russ. J. Appl. Chem., 2017, vol. 90, no. 9, pp. 1454–1458.CrossRefGoogle Scholar
  2. 2.
    Rahimi, E., Davoodi, A., and Rashid, A.R.K., Mater. Lett., 2018, vol. 210, pp. 341–344.CrossRefGoogle Scholar
  3. 3.
    Mech, K., Surf. Coat. Technol., 2017, vol. 315, pp. 232–239.CrossRefGoogle Scholar
  4. 4.
    Chao-qun, Li, Xin-hai, Li, Zhi-xin, Wang, and Hua-jun, Guo, Trans. Nonferrous Met. Soc. China, 2007, vol. 17, pp. 1300–1306.CrossRefGoogle Scholar
  5. 5.
    Gamburg, Yu.D., Grosheva, M.Yu., Biallozor, S., and Hass, M., Surf. Coat. Technol., 2002, vol. 150, pp. 95–100.CrossRefGoogle Scholar
  6. 6.
    Xiang, T., Ding, S., Li, C., Zheng, Sh., Hu, W., Wang, J., and Liu, P., Mater. Design, 2017, vol. 114, pp. 65–72.CrossRefGoogle Scholar
  7. 7.
    Esmailzadeh, S., Khorsand, S., Raeissi, K., and Ashrafizadeh, F., Surf. Coat. Technol., 2015, vol. 283, pp. 337–346.CrossRefGoogle Scholar
  8. 8.
    Danișman, M., Mater. Chem. Phys., 2016, vol. 171, pp. 276–280.CrossRefGoogle Scholar
  9. 9.
    Zarebidaki, A., Mahmoudikohani, H., and Aboutalebi, M.R., J. Alloys Compd., 2014, vol. 615, pp. 825–830.CrossRefGoogle Scholar
  10. 10.
    Seyeux, A., Maurice, V., Klein, L.H., and Marcus, P., Electrochim. Acta, 2008, vol. 54, pp. 540–544.CrossRefGoogle Scholar
  11. 11.
    Lόpez, J.R., Stremsdoerfer, G., Trejo, G., Ortega, R., Pérez, J.J., and Meas, Y., Int. J. Electrochem. Sci., 2012, vol. 7, pp. 12244–12253.Google Scholar
  12. 12.
    Vite-Torres, J., Vite-Torres, M., Aguilar-Osorio, R., and Reyes-Astivia, J.E., FME Trans., 2015, vol. 43, pp. 206–210.Google Scholar
  13. 13.
    Cheng, W., Ge, W., Yang, Q., and Qu, X., Appl. Surf. Sci., 2013, vol. 276, pp. 604–608.CrossRefGoogle Scholar
  14. 14.
    Yong, P., Yi-Chun, Z., Zhao-Feng, Z., Yong-Li, H., Yan-Guo, L., and Chang-Qing, S., Trans. Nonferrous. Soc. China, 2007, vol. 17, pp. 1225–1229.CrossRefGoogle Scholar
  15. 15.
    Li-Yuan, Q., Jian-She, L., and Qing, J., Trans. Non ferrous. Soc. China, 2010, vol. 20, pp. 82–89.CrossRefGoogle Scholar
  16. 16.
    Meng, G., Li, Y., Shao, Y., Zhang, T., Zhang, T., Wang, Y., Wang, F., Cheng, X., Dong, C., and Li, X., J. Mater. Sci. Technol., 2016, vol. 32, pp. 465–469.CrossRefGoogle Scholar
  17. 17.
    Meng, G., Li, Y., Shao, Y., Zhang, T., Wang, Y., Wang, F., Cheng, X., Dong, C., and Li, X., J. Mater. Sci. Technol., 2015, vol. 31, pp. 1186–1192.CrossRefGoogle Scholar
  18. 18.
    Zhao, H., Liu, L., Zhu, J., Tang, Y., and Hu, W., Mater. Lett., 2007, vol. 61, pp. 1606–1608.Google Scholar
  19. 19.
    Hashemzadeh, M., Raeissi, K., Ashrafizadeh, F., and Khorsand, S., Surf. Coat. Technol., 2015, vol. 283, pp. 318–328.CrossRefGoogle Scholar
  20. 20.
    Jinlong, L., Tonxiang, L., and Chen, W., J. Solid State Chem., 2016, vol. 240, pp. 109–114.CrossRefGoogle Scholar
  21. 21.
    Local Probe Techniques for Corrosion Research, Initial stages of localized corrosion by pitting of passivated nickel surfaces studied by scan ning tunneling microscopy (STM) and atomic force microscopy (AFM), Oltra, R., Maurice, V., Akid, R., and Marcus, P., Eds., Elsevier, 2014, p. 208.Google Scholar
  22. 22.
    Sivasakthi, P., Sekar, R., and Ramesh Bapu, G.N.K., Mater. Res. Bull., 2015, vol. 70, pp. 832–839.CrossRefGoogle Scholar
  23. 23.
    Nasirpouri, F., Sanaeian, M.R., Samardak, A.S., Sukovatitsina, E.V., Ognev, A.V., Chebotkevich, L.A., Hosseini, M.-G., and Abdolmaleki, M., Appl. Surf. Sci., 2013, vol. 276, pp. 604–608.CrossRefGoogle Scholar
  24. 24.
    Imaz, N., Garcίa-Lecίna, E., and Dίez, J.A., Trans. Inst. Met. Finish., 2010, vol. 88, pp. 256–261.CrossRefGoogle Scholar
  25. 25.
    Rofagha, R., Langar, R., EI-Sherik, A.M., Erb, U., Palumbo, G., and Aust, K.T., Scr. Metall. Mater., 1991, vol. 25, pp. 2867–2872.CrossRefGoogle Scholar
  26. 26.
    Rashidi, A.M. and Amadeh, A., Surf. Coat. Technol., 2009, vol. 204, pp. 353–358.CrossRefGoogle Scholar
  27. 27.
    Wasekar, N.P., Haridoss, P., Seshadri, S.K., and Sundararajan, G., Surf. Coat. Technol., 2016, vol. 291, pp. 130–140.CrossRefGoogle Scholar
  28. 28.
    Schüler, K., Philippi, B., Weinmann, M., Marx, V. M., and Vehoff, H., Acta Mater., 2013, vol. 61, pp. 3945–3955.CrossRefGoogle Scholar
  29. 29.
    Antikhovich, I.V., Kharitonov, D.S., Chernik, A.A., and Dobryden, I.B., Russ. J. Appl. Chem., 2017, vol. 90, no. 4, pp. 566–573.CrossRefGoogle Scholar
  30. 30.
    Semenova, I.V., Khoroshilov, A.V., and Florianovich, G.M., Korroziya i zashchita ot korrozii (Corrosion and Corrosion Protection), Moscow: Fizmatlit, 2006.Google Scholar
  31. 31.
    Tseluikin, V.N., Tolstova, I.V., Solov’eva, N.D., and Gun’kin, I.F., Gal’vanotekh. Obrab. Poverkhn., 2006, vol. XIV, no. 1, pp. 28–31.Google Scholar
  32. 32.
    Antikhovich, I.V., Chernik, A.A., Zharskii, I.M., and Bolvako, A.K., Elektrokhimiya, 2015, vol. 51, no. 3, pp. 1–6.Google Scholar
  33. 33.
    Antikhovich, I.V., Chernik, A.A., and Zharskii, I.M., Gal’vanotekh. Obrab. Poverkhn., 2015, vol. 23, no. 2, pp. 38–43.Google Scholar
  34. 34.
    Antihovich, I.V., Ablazhey, N.M., Chernik, A.A., and Zharsky, I.M., Proc. Chem., 2014, vol. 10, pp. 373–377.CrossRefGoogle Scholar
  35. 35.
    Dolgikh, O.V., Sotskaya, N.V., ZuenVu Tkhi, Kotlyarova, E.A., and Agapov, B.L., Fizikokhim. Poverkhn. Zashch. Met., 2009, vol. 45, p. 636.Google Scholar
  36. 36.
    Spravochnik khimika: v 6 tomakh (Chemist’s Companion in 6 vols.), Nikol’skii, B.P., Ed.,. Leningrad, 1964. vol. 3.Google Scholar
  37. 37.
    Patrick, I.D. and Francescetti, D.R., Impedance Spectroscopy, Macdonald, J.R., Ed., New York: Wiley, 1987., p. 27.Google Scholar
  38. 38.
    Kumar Singh, R., Devivaraprasad Kar, R., Chakra borty, A., and Neergat, M., J. Electrochem. Soc., 2015, vol. 162, pp. F489–F498.Google Scholar
  39. 39.
    Kharitonov, D.S., Ornek, C., Claesson, P.M., Sommertune, J., Zharskii, I.M., Kurilo, I.I., and Pan, J., J. Electrochem. Soc., 2018, vol. 165, pp. C116–C126.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2018

Authors and Affiliations

  • I. V. Makarova
    • 1
  • D. S. Kharitonov
    • 1
  • I. B. Dobryden’
    • 2
  • A. A. Chernik
    • 1
  1. 1.Belarussian State Technological UniversityMinskRepublic of Belarus
  2. 2.KTH Royal Institute of Technology, Surface and Corrosion Science DivisionStockholmSweden

Personalised recommendations