Russian Journal of Applied Chemistry

, Volume 87, Issue 2, pp 141–150 | Cite as

Adhesion strength of filled polyaluminosilicates on aluminum surface

  • A. A. Ivanov
  • V. V. Botvin
  • A. G. Filimoshkin
Inorganic Synthesis and Industrial Inorganic Chemistry


Study of the adhesion of coatings based on polyaluminosilicates of dendrimer structure, deposited on an aluminum surface of complex morphology with roughnesses R a = 0.05–11.30 μm, demonstrated that the adhesion strength of the sample with R a = 11.30 μm is 16 times that of a samples with a polished surface (R a = 0.05 μm) and 2.3 times that of the coating deposited on the surface produced by microarc oxidation. It was demonstrated that the values obtained for the work of adhesion are well correlated with the parameters of profilograms, which is particularly important for choosing the composition of coatings and prognosticating their adhesion under working conditions.


Acoustic Emission Adhesion Strength Aluminum Surface Adhesion Joint Scratch Test 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    Polimernye kompozitsionnye materialy: Struktura, svoistva, tekhnologiya (Polymeric Composite Materials: Structure, Properties, Technology), Berlin, A.A., Ed., St. Petersburg: Professiya, 2009.Google Scholar
  2. 2.
    Krupa, A.A. and Gorodov, V.S., Khimicheskaya tekhnologiya keramicheskikh materialov (Chemical Technology of Ceramic Materials), Kiev: Vysshaya Shkola, 1990.Google Scholar
  3. 3.
    Berlin, A.A. and Basin, V.E., Osnovy adgezii polimerov (Fundamentals of Polymer Adhesion), Moscow: Khimiya, 1984.Google Scholar
  4. 4.
    Vakula, V.L. and Pritykin, L.M., Fizicheskaya khimiya adgezii polimerov (Physical Chemistry of Polymer Adhesion), Moscow: Khimiya, 1984.Google Scholar
  5. 5.
    Zimon, A.D., Adgeziya plenok i pokrytii (Adhesion of Films and Coatings), Moscow: Khimiya, 1977.Google Scholar
  6. 6.
    Adamson, A., Physical Cemistry of Surfaces, Wiley Intersci. 1997.Google Scholar
  7. 7.
    Bazhenov, S.L., Berlin, A.A., Kul’kov, A.A., and Oshmyan, V.G., Polimernye kompozitsionnye materialy: Prochnost’ i tekhnologii (Polymeric Composite Materials: Strength and Technologies), Moscow: Intellekt, 2009.Google Scholar
  8. 8.
    Richardson, M.O.W., Polymer Engineering Composites, Apllied Sci. Publisher Ltd., London, 1977.Google Scholar
  9. 9.
    Mikhailin, Yu.A., Termoustoichivye polimery i polimernye materialy (Heat-Resistant Polymers and Polymeric Materials), St. Petersburg: Professiya, 2006.Google Scholar
  10. 10.
    Povstugar, V.I., Kodolov, V.I., and Mikhailova, S.S., Stroenie i svoistva poverkhnosti polimernykh materialov (Structure and Properties of the Surface of Polymeric Materials), Moscow: Khimiya, 1988.Google Scholar
  11. 11.
    Mikhailin, Yu.A., Konstruktsionnye polimernye kompozitsionnye materialy (Structural Polymeric Composite Materials), St. Petersburg: Nauchnye Osnovy i Tekhnologii, 2013, 2nd ed.Google Scholar
  12. 12.
    Deryagin, B.V., Krotova, N.A., and Smilga, V.P., Adgeziya tverdykh tel (Adhesion of Solids), Moscow: Nauka, 1973.Google Scholar
  13. 13.
    Perepelkin, K.E., Armiruyushchie volokna i voloknistye polimernye kompozity (Reinforcing Fibers and Fibrous Polymeric Composites), Moscow: Nauchnye Osnovy i Tekhnologii, 2009.Google Scholar
  14. 14.
    Ivanov, A.A., Botvin, V.V., and Filimoshkin, A.G., Russ. J. Appl. Chem., 2013, vol. 86, no. 9, pp. 1317–1325.CrossRefGoogle Scholar
  15. 15.
    Mikhailin, Yu.A., Spetsial’nye polimernye kompozitsionnye materialy (Special-Purpose Polymeric Composite Materials), Moscow: Nauchnye Osnovy i Tekhnologii, 2009.Google Scholar
  16. 16.
    Landel, R.F. and Nielsen, L.E., Mechanical Properties of Polymers and Composites, 2nd ed., CRC Press, 1993.Google Scholar
  17. 17.
    Berlin, A.A., Vol’fson, S.A., Oshmyan, V.G., and Enikolopov, N.S., Printsipy sozdaniya kompozitsionnykh polimernykh materialov (Principles of Development of Composite Polymeric Materials), Moscow: Khimiya, 1990.Google Scholar
  18. 18.
    Composite Materials: Fracture and Fatigue, Broutman, L.J., Ed., Academic Press, 1974.Google Scholar
  19. 19.
    Ichimura, H. and Ishii, Y., Surf. Coat. Techn., 2003, vol. 165, pp. 1–7.CrossRefGoogle Scholar
  20. 20.
    Mamaev, A.I. and Mamaeva, V.A., Sil’notokovye protsessy v rastvorakh elektrolitov (High-Current Processes in Electrolyte Solutions), Novosibirsk: Sib. Otd. Ros. Akad. Nauk, 2005.Google Scholar
  21. 21.
    Matthews, F.L. and Rawlings, Rees D., Composite Materials: Engineering and Science, Chapman & Hall, 1994.Google Scholar
  22. 22.
    Worden, K., Smart Technologies, World Sci. Piblishing, 2003.CrossRefGoogle Scholar
  23. 23.
    Napolniteli dlya polimernykh kompozitsionnykh materialov (Fillers for Polymweric Composite Materials), Kats, G.S. and Mikevski, D.V., Eds., Moscow: Khimiya, 1981.Google Scholar
  24. 24.
    Ferrichio, T.Kh., Osnovnye primery vybora i ispol’zovaniya dispersnykh napolnitelei (Key Examples of Selection and Using Dispersed Fillers), Moscow: Khimiya, 1979.Google Scholar
  25. 25.
    Kryzhanovskii, V.K. Burlov, V.V., Panimatchenko, A.D., and Kryzhanovskaya, Yu.V., Tekhnicheskie svoistva polimernykh materialov (Technical Properties of Composite Materials), St. Petersburg: Professiya, 2005.Google Scholar
  26. 26.
    Kerber, M.L., Golovkin, G.S., Gorbatkina, Yu.A., et al., Polimernye kompozitsionnye materialy (Polymeric Composite Materials), Berlin, A.A., Ed., St. Petersburg: Professiya, 2008.Google Scholar
  27. 27.
    Promyshlennye polimernye kompozitsionnye materialy (Industrial Polymeric Composite Materials), Babaevskii, P.G., Ed., Moscow: Khimiya, 1980.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2014

Authors and Affiliations

  • A. A. Ivanov
    • 1
  • V. V. Botvin
    • 1
  • A. G. Filimoshkin
    • 1
  1. 1.National Research Tomsk State UniversityTomskRussia

Personalised recommendations