Advertisement

Russian Journal of Coordination Chemistry

, Volume 45, Issue 12, pp 836–842 | Cite as

Solvothermal Synthesis of the Metal-Organic Framework MOF-5 in Autoclaves Prepared by 3D Printing

  • G. L. Denisov
  • P. V. Primakov
  • A. A. Korlyukov
  • V. V. Novikov
  • Yu. V. NelyubinaEmail author
Article
  • 29 Downloads

Abstract

The known metal-organic framework {Zn4O(BDC)3} (MOF-5 (I), where BDC is terephthalate anion) is synthesized by the solvothermal method in autoclaves prepared by 3D printing from polypropylene. The synthesized polymer is isolated in the individual state and characterized by elemental analysis and powder X-ray diffraction analysis. The crystal structures of MOF-5 and another coordination polymer based on zinc(II) terephthalate {Zn4O(BDC)3} · (ZnO)0.125 (SUMOF-2 (II)) obtained as a by-product of the solvothermal synthesis are confirmed by X-ray diffraction analysis (СIF files ССDС nos. 1920366 (I) and 1926136 (II)).

Keywords:

3D printing autoclave metal-organic framework X-ray diffraction analysis solvothermal synthesis zinc terephthalate 

Notes

ACKNOWLEDGMENTS

The structures of the synthesized compounds were studied using the equipment of the Center of Molecular Structure Investigation at the Nesmeyanov Institute of Organoelement Compounds (Russian Academy of Sciences) and supported by the Ministry of Science and Higher Education of the Russian Federation.

FUNDING

This work was supported by the Russian Foundation for Basic Research, project no. 18-29-04020.

CONFLICT OF INTEREST

The authors declare that they have no conflicts of interest.

REFERENCES

  1. 1.
    Yaghi, O. and Li, H., J. Am. Chem. Soc., 1995, vol. 117, no. 41, p. 10401.CrossRefGoogle Scholar
  2. 2.
    Yaghi, O.M., O’Keeffe, M., Ockwig, N.W., et al., Nature, 2003, vol. 423, no. 6941, p. 705.CrossRefGoogle Scholar
  3. 3.
    Peplow, M., Nature News, 2015, vol. 520, no. 7546, p. 148.CrossRefGoogle Scholar
  4. 4.
    Li, H., Eddaoudi, M., O’Keeffe, M., and Yaghi, O.M., Nature, 1999, vol. 402, no. 6759, p. 276.CrossRefGoogle Scholar
  5. 5.
    Wilmer, C.E., Leaf, M., Lee, C.Y., et al., Nature Chemistry, 2012, vol. 4, no. 2, p. 83.CrossRefGoogle Scholar
  6. 6.
    Herm, Z.R., Wiers, B.M., Mason, J.A., et al., Science, 2013, vol. 340, no. 6135, p. 960.CrossRefGoogle Scholar
  7. 7.
    Yoon, M., Suh, K., Natarajan, S., and Kim, K., Angew. Chem., Int. Ed. Engl., 2013, vol. 52, no. 10, p. 2688.CrossRefGoogle Scholar
  8. 8.
    Lee, J., Farha, O.K., Roberts, J., et al., Chem. Soc. Rev., 2009, vol. 38, no. 5, p. 1450.CrossRefGoogle Scholar
  9. 9.
    Giménez-Marqués, M., Hidalgo, T., Serre, C., and Horcajada, P., Coord. Chem. Rev., 2016, vol. 307, p. 342.CrossRefGoogle Scholar
  10. 10.
    Inokuma, Y., Yoshioka, S., Ariyoshi, J., et al., Nature, 2013, vol. 495, no. 7442, p. 461.CrossRefGoogle Scholar
  11. 11.
    Stock, N. and Biswas, S., Chem. Rev., 2011, vol. 112, no. 2, pp. 933–969.CrossRefGoogle Scholar
  12. 12.
    Zhao, Y., Li, K., and Li, J., Z. Naturforsch., B: J. Chem. Sci., 2010, vol. 65, no. 8, p. 976.CrossRefGoogle Scholar
  13. 13.
    Chen, X.-M. and Tong, M.-L., Acc. Chem. Res., 2007, vol. 40, no. 2, p. 162.CrossRefGoogle Scholar
  14. 14.
    Gordeev, E., Degtyareva, E., and Ananikov, V., Izv. Akad. Nauk, Ser. Khim., 2016, no. 6, p. 1637.Google Scholar
  15. 15.
    Kitson, P.J., Marshall, R.J., Long, D., et al., Angew. Chem., Int. Ed. Engl., 2014, vol. 53, no. 47, p. 12723.CrossRefGoogle Scholar
  16. 16.
    Zhang, C., Wijnen, B., and Pearce, J.M., J. Lab. Autom., 2016, vol. 21, no. 4, p. 517.CrossRefGoogle Scholar
  17. 17.
    Baden, T., Chagas, A.M., and Gage, G., PLoS Biol., 2015, vol. 13, no. 3. e1002086.CrossRefGoogle Scholar
  18. 18.
    Berman, B., Business Horizons, 2012, vol. 55, no. 2, p. 155.CrossRefGoogle Scholar
  19. 19.
    Kitson, P.J., Glatzel, S., Chen, W., et al., Nat. Protocols, 2016, vol. 11, no. 5, p. 920.CrossRefGoogle Scholar
  20. 20.
    Symes, M.D., Kitson, P.J., Yan, J., et al., Nat. Chem., 2012, vol. 4, no. 5, p. 349.CrossRefGoogle Scholar
  21. 21.
    Mulyati, T.A., Ediati, R., and Rosyidah, A., Indones. J. Chem., 2015, vol. 15, no. 2, p. 101.CrossRefGoogle Scholar
  22. 22.
    Spek, A., J. Appl. Crystallogr., 2003, vol. 36, no. 1, p. 7.CrossRefGoogle Scholar
  23. 23.
    Sheldrick, G.M., Acta Crystallogr., Sect. A: Found. Crystalogr., 2008, vol. 64, no. 1, p. 112.CrossRefGoogle Scholar
  24. 24.
    Bourhis, L.J., Dolomanov, O.V., Gildea, R.J., et al., Acta Crystallogr., Sect. A: Found. Adv., 2015, vol. 71, no. 1, p. 59.CrossRefGoogle Scholar
  25. 25.
    Coelho, A., Bruker AXS GmbH, Karlsruhe, 2009.Google Scholar
  26. 26.
    Top3DShop. https://top3dshop.ru/.Google Scholar
  27. 27.
    OpenSCAD. http://www.openscad.org/documentation.html2009.Google Scholar
  28. 28.
    Koc, B., Ma, Y., and Lee, Y.-S., Rapid Prototyping J., 2000, vol. 6, no. 3, p. 186.CrossRefGoogle Scholar
  29. 29.
    Smid, P., CNC Control Setup for Milling and Turning: Mastering CNC Control Systems, Industrial Press Inc., 2010.Google Scholar
  30. 30.
    Simplify 3D. http://www.simplify3d.com/software/ documentation/.Google Scholar
  31. 31.
    Magnum 3D. https://magnum3d.ru/magnum-creative-2-uni/.Google Scholar
  32. 32.
    Yao, Q., Su, J., Cheung, O., et al., J. Mater. Chem., 2012, vol. 22, no. 20, p. 10345.CrossRefGoogle Scholar
  33. 33.
    Czaja, A.U., Trukhan, N., and Muller, U., Chem. Soc. Rev., 2009, vol. 38, no. 5, p. 1284.CrossRefGoogle Scholar
  34. 34.
    Seetharaj, R., Vandana, P., Arya, P., and Mathew, S., Arabian J. Chem., 2019, vol. 12, no. 3, p. 295.CrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  • G. L. Denisov
    • 1
  • P. V. Primakov
    • 1
    • 2
  • A. A. Korlyukov
    • 1
  • V. V. Novikov
    • 1
  • Yu. V. Nelyubina
    • 1
    • 3
    Email author
  1. 1.Nesmeyanov Institute of Organoelement Compounds, Russian Academy of SciencesMoscowRussia
  2. 2.Moscow State UniversityMoscowRussia
  3. 3.Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of SciencesMoscowRussia

Personalised recommendations