Advertisement

Journal of Mining Science

, Volume 54, Issue 2, pp 254–269 | Cite as

Analysis of a Green Transport Plant for Deep Sea Mining Systems

  • W. MaEmail author
  • G. Lodewijks
  • D. Schott
Mineral Mining Technology
  • 4 Downloads

Abstract

Deep sea mining was identified in the middle of last century. However, its industrialization and commercialization today are limited in the costal mining industry due to the high mining cost and technical issues. The purpose of this paper is to analyze a green transport plan of deep sea mining systems in terms of the optimal efficiency of the rigid pipe lifting system and the total energy consumption. The deep sea mining facilities considered in this paper consist of a mineral collecting machine, a flexible hose, a rigid pipe, a grinding machine, a concentrating machine and a horizontal pipe conveyor. Centrifugal pump modelling and its working principle are researched, because it is the major transport facility. The relationship between the optimal efficiency, total energy consumption, transport loss factor, and the relating mining parameters is determined by numerical simulations and fittings under Fortran and Matlab environment, and the optimization under 1st Opt environment. The research conducted in this paper is valuable for the pre-evaluation of deep sea mining transport systems and the further realization of its industrialization and commercialization process.

Keywords

Deep sea mining green transport plan optimal efficiency total energy consumption transport loss factor centrifugal pump 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Chung, J.S., Deep-Ocean Mining: Technologies for Manganese Nodules and Crusts, Int. J. Offshore Polar Eng., 1996, vol. 6 (04), pp. 244–254.Google Scholar
  2. 2.
    Wilburn, D.R., and Bleiwas, D.I., Platinum-Group Metals—World Supply and Demand, US Geological Survey Open-File Report, 2004, 1224, 2004–1224.Google Scholar
  3. 3.
    Collins, P.C., Kennedy, B., Copley, J., Boschen, R., Fleming, N., Forde, J., Ju, S.J., Lindsay, D., Marsh, L., Nye, V., and Patterson, A., Vent Base: Developing a Consensus Among Stakeholders in the Deep-Sea Regarding Environmental Impact Assessment for Deep-Sea Mining–A Workshop Report, Mar. Pol., 2013, vol. 42, pp. 334–336.CrossRefGoogle Scholar
  4. 4.
    Handschuh, R., Grebe, H., Panthel, J., Schulte, E., Wenzlawski, B., Schwarz, W., Atmanand, M.A., Jeyamani, R., Shajahan, M.A., Deepak, C.R., and Ravindran, M., Innovative Deep Ocean Mining Concept Based on Flexible Riser and Self-Propelled Mining Machines, The Fourth ISOPE Ocean Mining Symposium, International Society of Offshore and Polar Engineers, Poland, 2001.Google Scholar
  5. 5.
    Ma, W., Schott, D., and Lodewijks, G., A New Procedure for Deep Sea Mining Tailings Disposal, Minerals, 2017, vol. 7 (4), p. 47.CrossRefGoogle Scholar
  6. 6.
    Deepak, C.R., Shajahan, M.A., Atmanand, M.A., Annamalai, K., Jeyamani, R., Ravindran, M., Schulte, E., Handschuh, R., Panthel, J., Grebe, H., and Schwarz, W., Developmental Tests on the Underwater Mining System Using Flexible Riser Concept, The Fourth ISOPE Ocean Mining Symposium, International Society of Offshore and Polar Engineers, Poland, 2001.Google Scholar
  7. 7.
    Welling, C.G., An Advanced Design Deep Sea Mining System, The Offshore Technology Conference, Houston, Texas, 1981.Google Scholar
  8. 8.
    Kato, Y., Fujinaga, K., Nakamura, K., Takaya, Y., Kitamura, K., Ohta, J., Toda, R., Nakashima, T., and Iwamori, H., Deep-Sea Mud in the Pacific Ocean as a Potential Resource for Rare-Earth Elements, Nat. Geosci., 2011, vol. 4 (8), pp. 535–539.CrossRefGoogle Scholar
  9. 9.
    Ma, W., Schott, D., and Lodewijks, G., Continuous Line Bucket Lifting Versus Pipe Lifting, J. Offshore Mech. Arct. Eng. Trans. ASME, 2017.Google Scholar
  10. 10.
    Davarzani, H., Fahimnia, B., Bell, M., and Sarkis, J., Greening ports and maritime logistics: A review. Transport. Res. Part D-Transport., 2016, vol. 48, pp. 473–487.CrossRefGoogle Scholar
  11. 11.
    Sharma, R., Deep-Sea Mining: Economic, Technical, Technological, and Environmental Considerations for Sustainable Development, Mar. Technol. Soc. J., 2011, vol. 45 (5), pp. 28–41.CrossRefGoogle Scholar
  12. 12.
    Chung, J.S., Whitney, A.K., and Loden, W.A., Nonlinear Transient Motion of Deep Ocean Mining Pipe, J. Energy Resour. Technol.-Trans. ASME, 1981, vol. 103, pp. 2–10.CrossRefGoogle Scholar
  13. 13.
    Felippa, C.A., and Chung, J.S., Nonlinear Static Analysis of Deep Ocean Mining Pipe, Part I: Modeling and Formulation, ASME J. Energy Resour. Technol., 1981, vol. 103, pp. 11–15.CrossRefGoogle Scholar
  14. 14.
    Chung, J.S., and Tsurusaki, K., Advance in Deep-Ocean Mining Systems Research, The Fourth International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers, Osaka, Japan, 1994, pp. 18–31.Google Scholar
  15. 15.
    Chung, J.S., and Felippa, C.A., Nonlinear Static Analysis of Deep Ocean Mining Pipe, Part II: Numerical Studies, J. Energy Resour. Technol.-Trans., 1981, vol. 103 (1), pp. 17–25.Google Scholar
  16. 16.
    Huang, X., Liu, Z., and Yang, W., Comparative Study of SGS Models for Simulating the Flow in a Centrifugal-Pump Impeller Using Single Passage, Eng. Comput., 2015, vol. 32 (7), pp. 2120–2135.CrossRefGoogle Scholar
  17. 17.
    Guo, Z., Zhang, D., Liu, H., He, Z., and Shi, L., Green Transportation Scheduling with Pickup Time and Transport Mode Selections Using a Novel Multi-Objective Memetic Optimization Approach, Transport. Res. Part D-Transport., 2016.Google Scholar
  18. 18.
    Liu, Y., and Cirillo, C., Small Area Evaluation of Vehicle Ownership and Use, Transport. Res. Part DTransport., 2016, vol. 47, pp. 136–148.CrossRefGoogle Scholar
  19. 19.
    Jonkers, C.O., The Loss Factor of Transport, Fördenund Heben, 1981, vol. 31 (2), pp. 98–101.Google Scholar
  20. 20.
    Lodewijks, G., The Transport Loss Factor Revisited, Proceedings of the 5th International Conference for Conveying and Handling of Particulate Solids, Sorrento, Italy, 2006 (key-note presentation).Google Scholar
  21. 21.
    Digiesi, S., Mossa, G., and Mummolo, G., A Loss Factor Based Approach for Sustainable Logistics, Prod. Plan. Control, 2012, vol. 23 (2–3), pp. 160–170.CrossRefGoogle Scholar
  22. 22.
    Van Roy, J., Leemput, N., De Breucker, S., Geth, F., Tant, P., and Driesen, J., An Availability Analysis and Energy Consumption Model for a Flemish Fleet of Electric Vehicles, Brussels, Belgium, 2011.Google Scholar
  23. 23.
    Walker, I.S., Energy Implications of In-Line Filtration in California Homes, ASHRAE Transactions, 2014.Google Scholar
  24. 24.
    Holt, J.K., Park, H.G., Wang, Y., Stadermann, M., Artyukhin, A.B., Grigoropoulos, C.P., and Bakajin, O., Fast Mass Transport Through Sub-2-Nanometer Carbon Nanotubes, Science, 2006, vol. 312 (5776), pp. 1034–1037.CrossRefGoogle Scholar
  25. 25.
    Workman, L., and Eloranta, J., The Effects of Blasting on Crushing and Grinding Efficiency and Energy Consumption, Proc. 29th Con Explosives and Blasting Techniques, Int. Society of Explosive Engineers, Cleveland OH, 2003, pp. 1–5.Google Scholar
  26. 26.
    Haffez, G.S.A., Correlation between Work Index and Mechanical Properties of Some Saudi Ores, Mater. Test., 2012, vol. 54(2), pp. 108–112.CrossRefGoogle Scholar
  27. 27.
    Haffez, G.S.A., Correlation between Bond Work Index and Mechanical Properties of Some Saudi Ores, J. Eng. Sci., 2012, vol. 40 (1), pp. 271–280.Google Scholar
  28. 28.
    Peng, Y., Xia, J.X., Cao, B., Ren, H.T., and Wu, Y., Spatial Configurations and Particle Transportation Parameters of Flexible Hose in Deep-Sea Mining System, The Eleventh Ocean Mining and Gas Hydrates Symposium, International Society of Offshore and Polar Engineers, Kona, Big Island, Hawaii, USA, 2015.Google Scholar
  29. 29.
    Shook, C.A., Pipelining Solids: The Design of Short Distance Pipelines Paper Presented at the Symposium on Pipeline Transport of Solids, The Canadian Society for Chemical Engineering, Toronto, 1969.Google Scholar
  30. 30.
    Shook, C.A., and Daniel, S.M., Flow of Suspensions of Solids in Pipelines: Part I. Flow with a Stable Stationary Deposit, Can. J. Chem. Eng., 1965, vol. 43 (2), pp. 56–61.CrossRefGoogle Scholar
  31. 31.
    Durand, R., and Condolios, E., The Hydraulic Transport of Coal and Solid Material in Pipes, The Proceedings of Colloquium on Hydraulic Transportation, France, 1952.Google Scholar
  32. 32.
    Spelay, R.B., Adane, K.F., Sanders, R.S., Sumner, R.J., and Gillies, R.G., The Effect of Low Reynolds Number Flows on Pitot Tube Measurements, Flow Meas. Instrum., 2015, vol. 45, pp. 247–254.CrossRefGoogle Scholar
  33. 33.
    Shook, C.A., and Bartosik, A.S., Particle-Wall Stresses in Vertical Slurry Flows, Powder Technol., 1994, vol. 81 (2), pp. 117–124.CrossRefGoogle Scholar
  34. 34.
    Gonzalez, J., Fernández, J., Blanco, E., and Santolaria, C., Numerical Simulation of the Dynamic Effects Due to Impeller-Volute Interaction in a Centrifugal Pump, J. Fluids Eng.-Trans. ASME, 2002, vol. 124 (2), pp. 348–355.CrossRefGoogle Scholar
  35. 35.
    Park, Y.C., Yoon, C.H., Lee, D.K., and Kwon, S.K., Experimental Studies on Hydraulic Lifting of Solid liquid Two phase Flow, Ocean and Polar Research, 2004, vol. 26 (3–4), p. 647.CrossRefGoogle Scholar
  36. 36.
    Van Wijk, J.M., Van Grunsven, F., Talmon, A.M., and van Rhee, C., Simulation and Experimental Proof of Plug Formation and Riser Blockage During Vertical Hydraulic Transport, Ocean Eng., 2015, vol. 101, pp. 58–66.CrossRefGoogle Scholar
  37. 37.
    Engelmann, H.E., Vertical Hydraulic Lifting of Large-Size Particles-a Contribution to Marine Mining, In Offshore Technology Conference, Offshore Technology Conference, Houston, Texas, 1978.Google Scholar
  38. 38.
    Jiang, L., Li, P., Tian, L., and Han, W., Experiment Study on Critical Velocity in Vertical Pipes for Hydraulic Lifting, The Sixth ISOPE Ocean Mining Symposium, International Society of Offshore and Polar Engineers, Changsha, Hunan, China, October 9-13, 2005.Google Scholar
  39. 39.
    Jain, S.V., Swarnkar, A., Motwani, K.H., and Patel, R.N., Effects of impeller diameter and rotational speed on performance of pump running in turbine mode. Energy Conv. Manag., 2015, vol. 89, pp. 808–824.CrossRefGoogle Scholar
  40. 40.
    Zhang, Y., and Steven, R., Pipe Conveyor and Belt: Belt Construction, Low Rolling Resistance and Dynamic Analysis, The 2012 SME Annual Meeting and Exhibit, Seattle, WA, 2012, pp. 616–619.Google Scholar
  41. 41.
    Dmitriev, V.G., and Sergeeva, N.V., Tractive Calculation of Belt Tubular Conveyors, GIAB, 2009, vol. 16, pp. 144–169.Google Scholar
  42. 42.
    Zamiralova, M.E., and Lodewijks, G., Energy Consumption of Pipe Belt Conveyors: Indentation Rolling Resistance, FME Transactions, 2012, vol. 40 (4), pp. 171–176.Google Scholar
  43. 43.
    Xia, J.X., Ni, J.R., and Mendoza, C., Hydraulic Lifting of Manganese Nodules Through a Riser, J. Offshore Mech. Arct. Eng. Trans. ASME, 2004, vol. 126 (1), pp. 72–77.CrossRefGoogle Scholar
  44. 44.
    Zou, W., COMRA's Research On Lifting Motor Pump, The Seventh ISOPE Ocean Mining Symposium, International Society of Offshore and Polar Engineers, Lisbon, Portugal, 2007, pp. 177–180.Google Scholar
  45. 45.
    Chung, J.S., Lee, K., and Tischler, A., Two-Phase Vertically Upward Transport of Silica Sands in Dilute Polymer Solution: Drag Reduction and Effects of Sand Size and Concentration The Seventh ISOPE Ocean Mining Symposium, International Society of Offshore and Polar Engineers, Lisbon, Portugal, 2007, pp. 188–196.Google Scholar

Copyright information

© Pleiades Publishing, Inc. 2018

Authors and Affiliations

  1. 1.Department of Maritime & Transport TechnologyDelft University of TechnologyDelftthe Netherlands
  2. 2.School of Aviation, Faculty of ScienceUniversity of New South WalesSydneyAustralia

Personalised recommendations