Advertisement

Russian Journal of Nondestructive Testing

, Volume 55, Issue 8, pp 603–609 | Cite as

Electromagnetic Witness Transducers of Pre-Fracture of Structures

  • V. F. NovikovEmail author
  • N. A. DrozdovEmail author
  • S. M. KulakEmail author
  • K. R. MuratovEmail author
  • D. F. NeradovskiiEmail author
ELECTROMAGNETIC METHODS
  • 9 Downloads

Abstract

Appropriate sensors and measuring systems are required to gather information on the fatigue state of technical devices and predict their residual life and reliability. We consider the possibility of using bonded foils, made of ferromagnetic materials, for creating wireless primary transducers of fatigue hours of a structure member. It is shown that when subjected to fatigue loading, 20–40 μm–thick foils made of nickel and 50NP and 79NM alloys considerably change their electromagnetic properties and can thus be used in the future to develop fatigue sensors.

Keywords:

fatigue prevention stress state ferromagnetic foil fatigue failure fatigue sensor 

Notes

REFERENCES

  1. 1.
    Troshchenko, V.T., Deformatsiya i razrushenie metallov pri mnogotsiklovom nagruzhenii (Deformation and Fracture of Metals under Multicycle Loading), Kiev: Naukova Dumka, 1981.Google Scholar
  2. 2.
    Terent’ev, V.F. and Korableva, S.A., Ustalost’ metallov (Fatigue of Metals), Moscow: Nauka, 2015.Google Scholar
  3. 3.
    Nesterenko, B.G., Development of regulatory requirements for fatigue and survivability of civilian transport aircraft, Probl. Mashinostr. Nadezhnosti Mash., 2010, no. 6, pp. 51–55.Google Scholar
  4. 4.
    Novikov, V.F., Bakharev, M.S., Isakov, V.V., and Semenov, V.V., Feasibility of nondestructive determination of the fatigue limit of steel 20H2M, Russ. J. Nondestr. Test., 2006, vol. 42, no. 3, pp. 198–202.CrossRefGoogle Scholar
  5. 5.
    Popov, B.E., Bezlyud’ko, G.Ya., Elkina, E.I., and Solomakha, R.N., Metal fatigue testing by the coercimetric method as an objective primary basis for the diagnostics of equipment and structures, V Mire NK, 2009, no. 2(44), pp. 28–32.Google Scholar
  6. 6.
    Muratov, K.R., Novikov, V.F., Neradovskii, D.F., and Kazakov, R.Kh., Magnetoelastic demagnetization of steel under cyclic loading, Phys. Met. Metallogr., 2018, vol. 119, no. 1, pp. 18–25.CrossRefGoogle Scholar
  7. 7.
    Panin, S.V., Burkov, M.V., Lyubutin, P.S., Altukhov, Y.A., and Khizhnyak, S.A., Application of integral-type deformation pickups for evaluating the fatigue damage of carbon composites, Russ. J. Nondestr. Test., 2014, vol. 50, no. 5, pp. 288–298.CrossRefGoogle Scholar
  8. 8.
    Syzrantsev, V.N. and Golofast, S.L., Izmerenie tsiklicheskikh deformatsii i prognozirovanie dolgovechnosti detalei po pokazaniyam datchikov deformatsii integral’nogo tipa (Measurement of Cyclic Deformations and Prediction of the Durability of Parts According to the Readings of Integral-Type Strain Gauges), Novosibirsk: Nauka, 2004.Google Scholar
  9. 9.
    Pretsizionnye splavy / Spravochnik (Precision Alloys. A Handbook), Molotilov, B.V., Ed., Moscow: Metallurgiya, 1974.Google Scholar
  10. 10.
    Zuev, L.B. and Danilov, V.I., Fizicheskie osnovy prochnosti materialov: uchebnoe posobie (Physical Basics of Material Strength. A Handbook), Dolgoprudny: Intellekt Publ. House, 2013.Google Scholar
  11. 11.
    Mishin, D.D., Magnitnye materialy (Magnetic Materials), Moscow: Vyssh. Shkola1981.Google Scholar
  12. 12.
    Drozdov, N.A., Electromagnetic wintess transducers of structural failure, in Novye tekhnologii neftegazovomu raionu. Mater. Vsros. s mezhdunar. uchastiem nauchno-prakt. konf. studentov, aspirantov i molodykh uchenykh (New Technologies for the Oil and Gas Region. Proc. All-Russ. with Int. Participation Sci.-Pract. Conf. Stud. Grad. Stud. Young Sci.), 2015, pp. 154–157.Google Scholar
  13. 13.
    Fedosenko, Yu.K., Shkatov, P.N., and Efimov, A.G., Vikhretokovyi kontrol’ (Eddy Current Testing), Moscow: Spektr, 2011.Google Scholar
  14. 14.
    Kaganov, V.I., Radiotekhnicheskie tsepi i signaly (Radiotechnical Circuits and Signals), Moscow: INFRA-M, 2010.Google Scholar
  15. 15.
    Volovich, G.I., Skhemotekhnika analogovykh i analogo-tsifrovykh elektronnykh ustroistv (Circuitry of Analog and Analog-Digital Electronic Devices), Moscow: Dodeka-XXI, 2011.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  1. 1.Tyumen Industrial UniversityTyumenRussia

Personalised recommendations