Advertisement

Russian Journal of Electrochemistry

, Volume 54, Issue 11, pp 840–850 | Cite as

Electrocatalytic Study of Fe, Ni, Zr and Cu Complexes and Their Alumina Supported Catalysts

  • Shalini BiswasEmail author
  • Anil Kumar
Article

Abstract

The behavior of complexes of iron, nickel, zirconium and copper as an electrode in alkaline, acidic and neutral solution has been investigated primarily by cyclic voltammetry. Cyclic voltammetry is a classical measuring method in electro-analytic chemistry which is used for the study of catalysis and charge transfer. For the complexes [Fe–Cu], [Ni–Ni], [Zr–Zr] and [Cu–Cu] as well as for supported catalysts, it was possible to determine various oxidation reactions with the cyclic voltammetry method. For this method, these complexes and catalysts were coated on nickel electrodes and using cyclic voltammetry following reactions were carried out (a) oxidation of CH3OH, (b) oxidation of NaCl and (c) oxidation of NaOH. The cyclic voltammogram presented in this work were shown to have different oxidation states and reduction states depending upon the kind of chemical reaction carried out, nature of complex utilized, the nature of support as well as how the complex is bonded to the support.

Keywords

cyclic voltammetry complex electrocatalytic behavior supported catalysts and electron transfer 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Jurgen, H., Cyclic voltammetry–electrochemical spectroscopy–new analytical methods, Angew. Chem., Int. Ed., 1983, vol. 23, p. 831.Google Scholar
  2. 2.
    Banas, J., Stypula, B., Banas, K., Mrowiecka, J.S., Starowiez, M., and Borkowska, U.L., Corrosion and passivity of metals in methanol solutions of electrolytes, J. Solid State Electrochem., 2009, vol. 13, p. 1669.CrossRefGoogle Scholar
  3. 3.
    Mandal, S.K., Adhikary, B., and Nag, K., Dinuclear metal complexes. Part 4. Electrochemical studies of macrocyclic dicopper(II) complexes. Investigation of the effect of solvents, donor groups, and steric constraints on the stability of mixed-valence copper(II)–copper(I) complexes, J. Chem. Soc., Dalton Trans., 1986, vol. 6, p. 1175.CrossRefGoogle Scholar
  4. 4.
    Banas, J., The anodic behaviour of chromium steel X20Cr13 in organic solutions of sulphuric acid, Corros. Sci., 1982, vol. 22, no. 11, p. 1005.CrossRefGoogle Scholar
  5. 5.
    Banas, J., Anodic behavior of chromium in anhydrous and water-containing dimethylformamide H2SO4 and methanol H2SO4 solutions, Electrochim. Acta, 1982, vol. 27, no. 8, p. 1141.CrossRefGoogle Scholar
  6. 6.
    Banas, J., The effect of water on the anodic behaviour of Fe–Mo alloys in organic solvents, Corros. Sci., 1982, vol. 22, no. 11, p. 997.CrossRefGoogle Scholar
  7. 7.
    Danilov, A.I., Molodkina, E.B., and Polukarov, Yu.M., Initial stages of copper electrocrystallization on a glassy-carbon ring–disk electrode from sulfate electrolytes of various acidity: A cyclic voltammetry study, J. Electrochem. Soc., 1986, vol. 133, no. 2, p. 253.CrossRefGoogle Scholar
  8. 8.
    Zagal, J.H., Metallophthalocyanines as catalysts in electrochemical reactions, Coord. Chem. Rev., 1992, vol. 119, p. 89.CrossRefGoogle Scholar
  9. 9.
    Roznyatovskaya, N.V., Vassiliev, S.Yu., Yusipovich, A.I., Tsirlina, G.A., and Roznyatovskii, V.V., Aqueous electrochemistry of binuclear copper complex with Robson-type ligand: Dissolved versussurface-immobilized reactant, J. Solid State Electrochem., 2005, vol. 9, p. 581.CrossRefGoogle Scholar
  10. 10.
    Roznyatovskaya, N.V., Laurinavichute, V.K., Tsirlina, G.A., and Mirsky, V.M., Electrochemistry and catalytic behavior of immobilized binuclear complexes of copper( II) and nickel(II) with Robson type ligand, J. Sold State Electrochem., 2007, vol. 11, p. 981.CrossRefGoogle Scholar
  11. 11.
    Gongjun, Y., Xilong, Qu., Ming, S., Chengyin, W., Qishu, Qu., Xiaoya, Hu., Electrochemical behavior of lead(II) at poly(phenol red) modified glassy carbon electrode, and its trace determination by differential pulse anodic stripping voltammetry, Microchim. Acta, 2008, vol. 160, p. 275.CrossRefGoogle Scholar
  12. 12.
    Biswas, Sh., Biswas, P., and Kumar, A., Catalytic cracking of soybean oil with zirconium complex chemically bonded to alumina support without hydrogen, Int. J. Chem. Sci. Appl., 2012, vol. 3, no. 2, p. 306.Google Scholar
  13. 13.
    Medway, S.L., Lucas, C.A., Kowal, A., Nichols, R.J., and Johnson, D., In situ studies of the oxidation of nickel electrodes in alkaline solutions, J. Electroanal. Chem., 2006, vol. 587, p. 172.CrossRefGoogle Scholar
  14. 14.
    Juodkazis, K., Juodkazyte, J., Vilkauskaite, R., and Jasulaitiene, V., Nickel surface anodic oxidation and electrocatalysis of oxygen evolution, J. Sold State Electrochem., 2008, vol. 12, p. 1469.CrossRefGoogle Scholar
  15. 15.
    Barnard, R., Randell, C.F., and Tye, F.L., Studies concerning charged nickel hydroxide electrodes I. Measurement of reversible potentials, J. Appl. Electrochem., 1980, vol. 10, p. 109.CrossRefGoogle Scholar
  16. 16.
    Jayalakshmi, M. and Balasubramanian, K., Cyclic voltammetric behaviour of copper powder immobilized on paraffin impregnated graphite electrode in dilute alikali solution, Int. J. Electrochem. Sci., 2008, vol. 3, p. 1277.Google Scholar
  17. 17.
    Muralidharan, V.S. and Veerashanmughamani, M., Electrochemical behaviour of pure iron in concentrated sodium hydroxide solutions at different temperatures: A triangular potential sweep voltammetric study, J. Appl. Electrochem., 1985, vol. 15, p. 675.CrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Ltd. 2018

Authors and Affiliations

  1. 1.Centre for Transportation SystemsIndian Institute of Technology RoorkeeRoorkeeIndia
  2. 2.Department of Chemical EngineeringIndian Institute of Technology KanpurKanpurIndia

Personalised recommendations