Advertisement

Russian Metallurgy (Metally)

, Volume 2019, Issue 13, pp 1456–1459 | Cite as

Maximum Feed in Forging in a Radial-Forging Machine with the Jigging Motion of Head Levers

  • I. I. Nekrasov
  • A. A. FedulovEmail author
  • V. S. Parshin
METAL FORMING
  • 1 Downloads

Abstract

The radial reduction of a billet in a radial-forging machine (RFM) with the jigging motion of levers with heads is considered. The maximum metal feed in forging is determined to effectively choose the machine drive elements. To this end, we derive expressions to describe the motion of working tool during radial forging in RFM and equations for the drive power balance and the nonuniformity of machine running. In addition, the condition for the acceleration of the drive flyweight during the idle time of RFM is determined. Parametric analysis is performed to determine the maximum billet feed into heads for a number of electric engines and various reduced flywheel weights used in RFM with the jigging motion of heads.

Keywords:

radial forging forging head feed mechanism flywheel nonuniformity of machine running 

Notes

FUNDING

This work was supported by the Government of the Russian Federation, decision no. 211, project no. 02.A03.21.0006.

REFERENCES

  1. 1.
    V. S. Parshin, A. P. Karamyshev, I. I. Nekrasov, and P. P. Savintsev, “Production of rivet wire from aluminum alloys using a radial-forging machine,” Tsvetn. Met., No. 7, 69–70 (2002).Google Scholar
  2. 2.
    A. P. Karamyshev, V. S. Parshin, I. I. Nekrasov, and P. P. Savintsev, “Development and investigation of new technological processes of billet deformation in an AVS radial-forging machine,” in Forging–Stamping Production: Prospects and Development (GU VPO UGTU-UPI, Yekaterinburg, 2005), pp. 548–556.Google Scholar
  3. 3.
    A. P. Karamyshev, I. I. Nekrasov, V. S. Parshin, and V. A. Systerov, “Using an AVS radial-forging machine to prepare the ends of tubes for drawing,” Metallurgist 52 (9, 10), 498–500 (2008).CrossRefGoogle Scholar
  4. 4.
    A. P. Karamyshev, I. I. Nekrasov, V. S. Parshin, et al., “The production of a machine designed for the cold radial cyclic forging of solid and tube billets,” WIT Transactions on Ecology and the Environment 190 (1), 169–177 (2014).CrossRefGoogle Scholar
  5. 5.
    I. I. Artobolevskii, Theory of Mechanisms and Machines (Nauka, Moscow, 1988).Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2019

Authors and Affiliations

  • I. I. Nekrasov
    • 1
  • A. A. Fedulov
    • 1
    Email author
  • V. S. Parshin
    • 1
  1. 1.Ural Federal UniversityYekaterinburgRussia

Personalised recommendations