Advertisement

The Physics of Metals and Metallography

, Volume 115, Issue 3, pp 277–285 | Cite as

Effect of carbon on formation of mixed solid solutions during mechanochemical synthesis of Ni-Al-Mo-C mixtures and ordering of solutions during heating

  • V. K. Portnoi
  • A. V. Leonov
  • A. N. Streletskii
  • A. I. Logacheva
Structure, Phase Transformations, and Diffusion
  • 98 Downloads

Abstract

Solid solutions Ni(Al, Mo, C) are formed via milling the Ni2.8Al1Mo0.2 and Ni3Al0.8Mo0.2 and graphite-containing Ni2.8Al1Mo0.2C(0.25, 0.5) and Ni3Al0.8Mo0.2C(0.25, 0.5) mixtures. In this case, some amount of Mo remains beyond the solid solution. Graphite added to a starting mixture decreases the Mo solubility and favors the amorphization of solid solutions. The complete amorphization was found for the mixture with the 5 at % C and 5 at % Mo, which was added instead of Ni. The heating of mechanically synthesized (MS) powder alloys leads to the ordering of carbon-free and carbon-containing solid solutions with the formation of the L12 and E21 structure, respectively. In the course of the ordering of the Ni(Al, Mo, C) solid solutions, Mo and carbon precipitate in the form of the molybdenum carbide (Mo2C) second phase. The hardness of the MS three-phase Ni-Al-Mo-C solid solutions subjected to hot isostatic pressing is determined by the mass fraction of the formed Mo2C carbide. It is shown that the carbon content in the multicomponent antiperovskite can be estimated by analyzing the ratio of integral intensities of superlattice reflections I (100)/I (110).

Keywords

mechanical alloying solid solutions Ni(Al, Mo, C) amorphizaition ordering antiperovskite 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    R. G. Baligidad, U. Prakash, and A. Radhakrishna, “High temperature tensile and creep properties of a cast aim and ESR intermetallic alloy based on Fe3Al,” Mater. Sci. Eng., A 231, 206–210 (1997).CrossRefGoogle Scholar
  2. 2.
    Debashis Das, R. Balasubramaniam and M. N. Mungole, “Hot corrosion of carbon-alloyed Fe3Al based iron aluminides,” Mater. Sci. Eng., A 338, 24–32 (2002).CrossRefGoogle Scholar
  3. 3.
    F.-G. Wei, K.-Y. Hwang, and Y. Mishima, “Deformation of Co3AlC0.5 and a Co3AlC0.5-strengthened cobalt-based alloy,” Intermetallics 9, 671–679 (2001).CrossRefGoogle Scholar
  4. 4.
    W. Sanders and G. Sauthoff, “Deformation behavior of perovskite-type phases in the system Fe-Ni-Al-C. I: Strength and ductilityof Ni3AlCx and Fe3AlCx with various microstructures,” Intermetallics 5, 361–375 (1997).CrossRefGoogle Scholar
  5. 5.
    W. Sanders and G. Sauthoff, “Deformation behavior of perovskite-type phases in the system Fe-Ni-Al-C. II: Deformation behavior of a two-phase Fe3A1C0.45 alloy,” Intermetallics 5, 377–385 (1997).CrossRefGoogle Scholar
  6. 6.
    V. K. Portnoi, A. V. Leonov, V. I. Fadeeva, and S. A. Fedotov, “Mechanochemical synthesis in the Ni-Al-C system,” Bull. Russ. Acad. Sci.: Physics 71, 1693–1696 (2007).CrossRefGoogle Scholar
  7. 7.
    V. K. Portnoi, A. V. Leonov, A. V. Logachev, A. N. Streletskii, and V. A. Popov, “Mechanical alloying as method for introducing carbon in Ni3Al intermetallide,” Phys. Met. Metallogr. 113, 1169–1181 (2012).CrossRefGoogle Scholar
  8. 8.
    V. K. Portnoi, A. V. Leonov, V. I. Bogdanov, V. A. Popov, A. N. Streletskii, and A. I. Logacheva, “Mechanical alloying of Ni3Al by molybdenum and its distribution along intermetallide sublattices,” Phys. Met. Metallogr. 115, 49–56 (2014).Google Scholar
  9. 9.
    V. K. Portnoi, A. V. Leonov, S. N. Mudretsova, and S. A. Fedotov, “Formation of nickel carbide in the course of deformation treatment of Ni-C mixtures,” Phys. Met. Metallogr. 109, 153–161 (2010).CrossRefGoogle Scholar
  10. 10.
    V. K. Portnoi, A. V. Leonov, A. N. Streletskii, and A. V. Logachev, “Mechanochemical synthesis and heating-induced ordering of Ni-Al-Cr-C quaternary solid solutions,” Inorg. Mater. 49, 266–271 (2013).CrossRefGoogle Scholar
  11. 11.
    V. K. Portnoi, A. V. Leonov, A. N. Streletskii, and A. V. Logachev, “Phase transformations in Ni + Al and Ni + Al + Cr mixtures during mechanochemical synthesis and subsequent heating,” Inorg. Mater. 48, 1088–1092 (2012).CrossRefGoogle Scholar
  12. 12.
    V. I. Bogdanov, V. A. Popov, V. K. Portnoi, and A. V. Ruban, “Chemical and deformational interactions in solid solution of carbon in nickel,” Phys. Met. Metallogr. 113, 831–835 (2012).CrossRefGoogle Scholar
  13. 13.
    V. K. Portnoi, A. V. Leionov, S. N. Mudretsova, and S. A. Fedotov, “Formation of nickel carbide in the course of deformation treatment of Ni-C mixtures,” Phys. Met. Metallogr. 109, 153–161 (2010).CrossRefGoogle Scholar
  14. 14.
    E. V. Kozlov, E. L. Nikonenko, and N. A. Koneva, “Energy of planar defects in the Ni3Al phase: Theory and experiment,” Bull. Russ. Acad. Sci.: Ser. Phys. 71, 198–202 (2007).CrossRefGoogle Scholar
  15. 15.
    M. V. Fedorishcheva, D. V. Esikov, and E. V. Kozlov, “Concentration dependence of crystal lattice parameter of Ni3Al phase,” Proc. 2nd Int. Symp. “Phase Transformations in Solid Solutions and Alloys”, Sochi, RF, September 24–26, 2001, pp. 351–355.Google Scholar

Copyright information

© Pleiades Publishing, Ltd. 2014

Authors and Affiliations

  • V. K. Portnoi
    • 1
  • A. V. Leonov
    • 1
  • A. N. Streletskii
    • 2
  • A. I. Logacheva
    • 3
  1. 1.Chemical DepartmentLomonosov Moscow State UniversityMoscowRussia
  2. 2.Institute of Chemical PhysicsRussian Academy of SciencesMoscowRussia
  3. 3.JSC KompositeMoscow oblast, KorolevRussia

Personalised recommendations