Advertisement

Inorganic Materials

, Volume 54, Issue 15, pp 1503–1510 | Cite as

Methods for the Analysis of Residual Stress Fields in Spatial Details

  • N. A. MakhutovEmail author
  • I. A. Razumovskii
MECHANICS OF MATERIALS: STRENGTH, RESOURCE, AND SAFETY
  • 13 Downloads

Abstract

A brief review of the methods for the study of residual process stresses (RSs) in the elements of structures and specimens is given. The possibilities and the fields of the application of nondestructive testing of RSs are indicated. Destructive experimental and calculation methods for the study of two-dimensional and three-dimensional nonuniform fields of RSs in spatial structures, which are based on the interpretation of experimental data as an inverse problem of elasticity theory, are particularly noted. It is recommended to use optical-digital methods for the recording of displacement fields in order to obtain significant collections of experimental information necessary in this case, which are caused by the formation of the cuts of various configurations in the object under study.

Keywords:

residual stresses stress–strain state finite element method electron digital speckle interferometry mechanics of deformed solid 

Notes

ACKNOWLEDGMENTS

This work was supported by the Russian Science Foundation (project no. 14-19-00776).

REFERENCES

  1. 1.
    Makhutov, N.A. Prochnost’ i bezopasnost’: fundamental’nye i prikladnye issledovaniya (Durability and Safety: Fundamental and Applied Studies), Novosibirsk: Nauka, 2008.Google Scholar
  2. 2.
    Proc. Special Symp. within the 16th European Conf. on Fracture (ECF–16) “Residual Stress and Its Effects on Fatigue and Fracture,” Alexandroupolis, Greece, July 3–7, 2006, New York: Springer-Verlag, 2006.Google Scholar
  3. 3.
    Burkin, S.P., Shimov, G.V., and Andryukova, E.A., Ostatochnye napryazheniya v metalloproduktsii (Residual Stresses in the Metal Production), Yekaterinburg: Ural. Gos. Univ., 2015.Google Scholar
  4. 4.
    Schajer, G.S., Practical Residual Stress Measurement Methods, New York: Wiley, 2013.CrossRefGoogle Scholar
  5. 5.
    Fitzpatrick, M.E., Fry, A.T., Holdway, P., Kandil, F.A., Shackleton, J., and Suominen, L., Determination of residual stresses by x-ray siffraction, in Measurement Good Practice Guide No. 52, Teddington: Natl. Phys. Lab., 2005, no. 2.Google Scholar
  6. 6.
    Stewart, D.M., Stevens, K.J., and Kaiser, A.B., Magnetic Barkhausen noise analysis of stress in steel, Curr. Appl. Phys., 2004, vol. 4, nos. 2–4, pp. 308–311.Google Scholar
  7. 7.
    Ilker Yelbay, H., Cam, I., and Hakan Gür, C., Non-destructive determination of residual stress state in steel weldments by Magnetic Barkhausen Noise technique, NDT&E Int., 2010, vol. 43, pp. 29–33.CrossRefGoogle Scholar
  8. 8.
    Estefen, S.F., Gurova, T., Castello, X., and Leontiev, A., Surface residual stress evaluation in double electrode butt welded steel plates, Mater. Des., 2010, vol. 31, no. 3, pp. 1622–1627.CrossRefGoogle Scholar
  9. 9.
    Nikitina, N.E., Akustouprugost’. Opyt prakticheskogo primeneniya (Acoustic Elasticity: Practical Experience), Nizhny Novgorod: Talam, 2005.Google Scholar
  10. 10.
    Marquette, Ya.M., Belahcene, F., and Lu, J., Residual stresses in laser welded aluminium plate by use of ultrasonic and optical methods, Mater. Sci. Eng., 2004, vol. 382, nos. 1–2, pp. 257–264.Google Scholar
  11. 11.
    Bokuchava, G.D., Balagurov, A.M., Sumin, V.V., and Papushkin, I.V., Neutron Fourier diffractometer FSD for residual stress studies in materials and industrial components, J. Surf. Invest.: X-Ray, Synchrotron Neutron Tech., 2010, vol. 4, no. 6, pp. 879–890.CrossRefGoogle Scholar
  12. 12.
    Sumin, V.V., Sheverev, S.G., Schneider, R., Wimpory, R., and Balagurov, A.M., Results of measuring the residual strains in the WWER-1000 reactor vessel, Phys. Solid State, 2010, vol. 52, no. 5, pp. 992–995.CrossRefGoogle Scholar
  13. 13.
    Kostylev, V.I. and Margolin, B.Z., Determination of residual stress and strain fields caused by cladding and tempering of reactor pressure vessels, Int. J. Pressure Vessels Piping, 2000, vol. 77, pp. 723–735.CrossRefGoogle Scholar
  14. 14.
    Murugan, N. and Narayan, R., Finite element simulation of residual stresses and their measurement by contour method, Mater. Des., 2009, vol. 30, no. 6, pp. 2067–2071.CrossRefGoogle Scholar
  15. 15.
    Mi, G., Li, C., Gao, Z., Zhao, D., and Niu, J., Finite element analysis of welding residual stress of aluminum plates under different butt joint parameters, Eng. Rev., 2014, vol. 3, pp. 161–166.Google Scholar
  16. 16.
    Pokrovskii, A.M., Calculation of residual stresses in the bimetal rolling rolls after heat treatment, Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Ser. Mashinostr., 2012, no. 6, pp. 186–196.Google Scholar
  17. 17.
    Birger, I.A., Ostatochnye napryazheniya (Residual Stresses), Moscow: Mashgiz, 1963.Google Scholar
  18. 18.
    ASTM E-837-89: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method, West Conshohocken, PA: ASTM Int., 1989.Google Scholar
  19. 19.
    Odintsev, I.N., Shchepinov, V.P., and Shchikanov, A.Yu., Holographic interferometry for measuring residual stresses by using probing holes, Tech. Phys., 2003, vol. 48, no. 11, pp. 1464–1467.CrossRefGoogle Scholar
  20. 20.
    Shokriekh, M.M. and Ghasemi, A.R., Simulation of central hole drilling process for measurement of residual stresses in isotropic, orthotropic, and laminated composite plates, J. Compos. Mater., 2007, vol. 41, no. 4, pp. 435–452.CrossRefGoogle Scholar
  21. 21.
    Odintsev, I.I., Apal’kov, A.A., and Razumovskii, I.A., The measurement of residual stresses in massive construction elements by electron speckle interferometry, Zavod. Lab., Diagn. Mater., 2003, vol. 69, no. 2, pp. 45–49.Google Scholar
  22. 22.
    Schajer, G.S. and Steinzig, M., Full-field calculation of hole drilling residual stresses from electronic speckle pattern interferometry data, Exp. Mech., 2005, vol. 45, no. 6, pp. 526–532.CrossRefGoogle Scholar
  23. 23.
    Makhutov, N.A., Razumovskii, I.A., Kossov, V.S., Apal’kov, A.A., and Odintsev, I.N., Study of residual stresses using electron digital speckle interferometry in full-scale conditions, Zavod. Lab., Diagn. Mater., 2008, vol. 74, no. 5, pp. 47–52.Google Scholar
  24. 24.
    Sutton, M.A., Orteu, J.-J., and Schreier, H., Image Correlation for Shape, Motion and Deformation Measurements, Columbia: Univ. of South Carolina, 2009.Google Scholar
  25. 25.
    Razumovskii, I.A. and Khvostov, S.M., Research methodology of Residual stresses in the bimetal shell cases, Vopr. At. Nauki Tekh., Ser.: Obespechenie Bezop. AES, 2010, no. 14, pp. 155–162.Google Scholar
  26. 26.
    Dveres, M.N. and Fomin, A.V., Determination of residual stresses, Mashinovedenie, 1985, no. 5, pp. 23–31.Google Scholar
  27. 27.
    Razumovsky, I.A., Medvedev, M.V., and Fomin, A.V., Methods for investigations inhomogeneous residual stresses fields, in Handbook of Residual Stress and Deformation of Steel, Totten, G., Howes, M., and Unoue, T., Eds., Materials Park, Oh: ASM Int., 2002, pp. 125–138.Google Scholar
  28. 28.
    Prime, M.B. and Hill, M.R., Uncertainty, model error, and order selection for series-expanded, residual-stress inverse solutions, ASME J. Eng. Mater. Technol., 2006, vol. 128, pp. 175–185.CrossRefGoogle Scholar
  29. 29.
    Vaidyanathan, S. and Finnie, I., Determination of residual stresses from stress intensity factor measurements, J. Basic Eng., 1971, vol. 93, pp. 242–246.CrossRefGoogle Scholar
  30. 30.
    Rasumovsky, I.A., Interference-optical Methods of Solid Mechanics, Foundations of Engineering Mechanics, New York: Springer-Verlag, 2011.CrossRefGoogle Scholar
  31. 31.
    Kuliev, V.D. and Razumovskii, I.A., Determination of residual stresses in bimetalls, Dokl. Akad. Nauk SSSR, 1990, vol. 315, no. 3, pp. 561–565.Google Scholar
  32. 32.
    Obespechenie resursa i zhivuchesti vodo-vodyanykh energeticheskikh reaktorov (Ensuring the Capacity and Lifespan of WWER), Makhutov, N.A. and Gadenin, M.M., Eds., Moscow: Nauka, 2009.Google Scholar
  33. 33.
    Prime, M.B., Residual stress measurement by successive extension of a slot: the crack compliance method, Appl. Mech. Rev., 1999, vol. 52, no. 2, pp. 75–96.CrossRefGoogle Scholar
  34. 34.
    Razumovskii, I.A. and Chernyatin, A.S., The method and program for determination of the parameters of the stress-strain state based on experimental data, Mashinostr. Inzh. Obraz., 2009, no. 4, pp. 35–42.Google Scholar
  35. 35.
    Chernyatin, A.S. and Razumovskii, I.A., Methodology and software package for assessment of stress-strain state parameters of full-scale structures and its application to a study of loading level, defect rate, and residual stress level in elements of NPP equipment, Strength Mater., 2013, vol. 45, no. 4, pp. 506–511.CrossRefGoogle Scholar
  36. 36.
    Schajer, G.S., Advances in hole-drilling residual stress measurements, Proc. XI Int. Congr. and Exposition on Experimental Mechanics and Applied Mechanics, June 2–5, 2008, Bethel, CT: Soc. Exp. Mech., 2008.Google Scholar
  37. 37.
    Razumovsky, I.A. and Chernyatin, A.S., Experimentally-settlement method for studying residual stresses in the two-layer construction elements by way of drilling, J. Mach. Manuf. Reliab., 2011, vol. 40, no. 4, pp. 101–109.Google Scholar
  38. 38.
    Chernyatin, A.S. and Razumovskii, I.A., A sequentially deepened disc cut as an indicator of residual stresses in spatial bodies, J. Mach. Manuf. Reliab., 2015, vol. 44, no. 5, pp. 471–478.CrossRefGoogle Scholar

Copyright information

© Pleiades Publishing, Inc. 2018

Authors and Affiliations

  1. 1.Mechanical Engineering Research Institute, Russian Academy of SciencesMoscowRussia

Personalised recommendations