References
Huber, F.W., Johnson, P.D., Sharma, O.P., Staubach, J.B., and Gaddis, S.W., “Performance Improvement Through Indexing of Turbine Airfoils: Part I—Experimental Investigation,” ASME Journal of Turbomachinery 118:630–635 (1996).
Griffin, L.W., and Sharma, O.P., “Performance Improvement Through Indexing of Turbine Airfoils: Part 2—Numerical Simulation,” ASME Journal of Turbomachinery 118:636–642 (1996).
Dorney, D.J., and Sharma, O.P., “A study of turbine performance increases through airfoil clocking.” AIAA Paper 96–2816 (1996).
Walker, G.J., Hughes, J.D., and Solomon, W.J., “Periodic Transition on an Axial Compressor Stator: Incidence and Clocking Effects: Part I–Experimental Data,” Journal of Turbomachinery 121:398–407 (1999).
Walker, G.J., Hughes, J.D., Köhler, I., et al, “The Influence of Wake-Wake Interactions on Loss Fluctuations of a Downstream Axial Compressor Blade Row [J],” ASME Journal of Turbomachinery 120:695–704 (1998).
Hsu, S.T., and Wo, A.M., “Reduction of Unsteady Blade Loading by Beneficial Use of Vortical and Potential Disturbances in an Axial Compressor with Rotor Clocking [J],” ASME Journal of Turbomachinery 120:705–713 (1998).
Mailach, R., and Vogeler, K., “Rotor-Stator Interactions in a Four-Stage Low-Speed Axial Compressor—Part I: Unsteady Profile Pressures and the Effect of Clocking,” Journal of Turbomachinery 126:507–518 (2004).
Jia, H.X., Xi, G., Muller, L., Mailach, R., and Vogeler, K., “Effect of Clocking on the Unsteady Rotor Blade Loading in a Low-Speed Axial Compressor at Design and Off-Design Operating Conditions,” Proceedings of the Institution of Mechanical Engineers, part G: Journal of Aerospace Engineering 222:895–906 (2008).
Hummel, F., “Wake-Wake Interactions and its Potential for Clocking in a Transonic High Pressure Turbine,” ASME Journal of Turbomachinery 124:69–76 (2002).
Tiedemann, M., and Kost, F., “Some Aspects of Wake-Wake Interactions Regarding Turbine Stator Clocking,” ASME Journal of Turbomachinery 123:526–533 (2001).
Korakianitis, T., “On the Propagation of Viscous Wakes and Potential Flow in Axial-Turbine Cascades,” ASME Journal of Turbomachinery 115:118–127 (1993).
Henderson, A.D., Walker, G.J., and Hughes, J.D., “The Influence of Turbulence on Wale Dispersion and Blade Row Interaction in an Axial Compressor,” ASME Journal of Turbomachinery 128:150–157 (2006).
Dorney, D.J., Sharma, O.P., and Gundy-Burlet, K.L., “Physics of airfoil clocking in a high-speed axial compressor,” ASME Paper 98-GT-082 (1998).
Barankiewicz, W.S., and Hathaway, M.D., “Effects of stator indexing on performance in a low speed multistage axial compressor.” ASME Paper 97-GT-496 (1997).
Bohn, D., Ren, J., and Sell, M., “Influence of Stator Clocking on the Unsteady Three-Dimensional Flow in a Two-Stage Turbine,” Journal of Turbomachinery 127:156–163 (2005).
Zhou, L., Xi, G., and Cai, Y.H., “Experimental Study on the Influence of Diffuser and Inlet Guide Vane for the Performance of Centrifugal Compressor,” Experimental Techniques 32(5):26–33 (2008).
Brun, K., and Kurz, R., “Measurement Uncertainties Encountered During Gas Turbine Driven Compressor Field Testing,” Journal of Engineering for Gas Turbines and Power 123:62–69 (2001).
Ubaldi, M., Zunino, P., Barigozzi, G., and Cattanei, A., “An Experimental Investigation of Stator Induced Unsteadiness on Centrifugal Impeller Outflow,” Journal of Turbomachinery 118:41–54 (1996).
Inoue, M., and Cumpsty, N.A., “Experimental Study of Centrifugal Impeller Discharge Flow in Vaneless and Vaned Diffusers,” ASME Journal of Engineering for Gas Turbines and Power 106:455–467 (1984).
Hathaway, M.D., Suder, K.L., Okiishi, T.H., Strazisar, A.J., and Adamczyk, J.J. “Measurements of the unsteady flow field within the stator row of a transonic axial-flow fan—results and discussion.” ASME Paper 1987-GT-227 (1987).
Gao, L.M., Xi, G., Zhou, L., and Wang, S.J., “Experimental and Computational Investigation of a Centrifugal Compressor Stage,” Journal of Power and Energy 219:25–33 (2005).
Eduardo, B.M., Rafael, B.T., and Carlos, S., “Angular Range and Uncertainty Analysis of Nonorthogonal Crossed Hot Wire Probes,” Journal of Fluids Engineering 120:90–94 (1998).
Kline, E.J., and Mcclintock, F.A., “Describing Uncertainties in Single Sample Experiments,” Mechanical engineering, January 3–8 (1953).
Ubaldi, M., Zunino, P., and Cattanei, A., “Relative Flow and Turbulence Measurements Downstream of a Backward Centrifugal Impeller,” Journal of Turbomachinery 115:543–551 (1993).
Eckardt, D., “Instantaneous Measurements in the Jet-Wake Discharge Flow of a Centrifugal Compressor Impeller,” Journal of Engineering for Power 97:337–346 (1975).
Ali, P., “Experimental Hot-Wire Measurements in a Centrifugal Compressor with Vaned Diffuser,” International Journal of Heat and Fluid Flow 29:1512–1526 (2008).
Zhou, L., “Numerical and experimental investigation on unsteady flow fields inside a centrifugal compressor stage,” Dissertation for Doctoral Degree. Xi’an Jiaotong University. January 140–143 (2006).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jiang, H., Xi, G., Gong, W.Q. et al. IGV wake effect in centrifugal compressor. Exp Tech 35, 41–52 (2011). https://doi.org/10.1111/j.1747-1567.2010.00620.x
Published:
Issue Date:
DOI: https://doi.org/10.1111/j.1747-1567.2010.00620.x