References
Dao, M., Chollacoop, N., Van Vliet, K.J., Venkatesh, T.A., and Suresh S., “Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation,” Acta Materialia 49(19):3899–3918 (2001).
Bucaille, J.J., Stauss, S., Felder, E., and Michler, J., “Determination of Plastic Properties of Metals by Instrumented Indentation Using Different Sharp Indenters,” Acta Materialia 51(6):1663–1678 (2003).
Cheng, Y.-T., and Cheng, C.-M., “General Relationship Between Contact Stiffness, Contact Depth, and Mechanical Properties for Indentation in Linear Viscoelastic Solids Using Axisymmetric Indenters of Arbitrary Profiles,” Applied Physics Letters 87(11):111914 (2005).
Cheng, Y.-T., Wangyang, N., and Cheng, C.-M., “Nonlinear Analysis of Oscillatory Indentation in Elastic and Viscoelastic Solids,” Physical Review Letters 97(7):075506 (2006).
Liu, C.-K., Lee, S., Sung, L.-P., and Nguyen, T., “Load–Displacement Relations for Nanoindentation of Viscoelastic Materials,” Journal of Applied Physics 100(3):033503 (2006).
Cheng, L., Xia, X., Yu, W., Scriven, L.E., and Gerberich, W.W., “Flat-Punch Indentation of Viscoelastic Material,” Journal of Polymer Science, Part B: Polymer Physics 38(1):10–22 (2000).
Lu, H., Wang, B., Ma, J., Huang, G., and Viswanathan, H., “Measurement of Creep Compliance of Solid Polymers by Nanoindentation,” Mechanics of Time-Dependent Materials 7(3–4):189–207 (2003).
Oyen, M.L., and Cook, R.F., “Load–Displacement Behavior During Sharp Indentation of Viscous-Elastic–Plastic Materials,” Journal of Materials Research 18(1):139–150 (2003).
Huang, G., Wang, B., and Lu, H., “Measurements of Viscoelastic Functions of Polymers in the Frequency-Domain Using Nanoindentation,” Mechanics of Time-Dependent Materials 8(4):345–364 (2004).
Odegard, G.M., Gates, T.S., and Herring, H.M., “Characterization of Viscoelastic Properties of Polymeric Materials Through Nanoindentation,” Experimental Mechanics 45(2):130–136 (2005).
Huang, G., and Lu, H., “Measurement of Young’s Relaxation Modulus Using Nanoindentation,” Mechanics of Time-Dependent Materials 10(3):229–243 (2006).
Oyen, M.L., “Analytical Techniques for Indentation of Viscoelastic Materials,” Philosophical Magazine 86(33–35):5625–5641 (2003).
Schffmann, K.I., “Nanoindentation Creep and Stress Relaxation Tests of Polycarbonate: Analysis of Viscoelastic Properties by Different Rheological Models,” International Journal of Materials Research 97(9): 1199–1211 (2006).
Huang, G., and Lu, H., “Measurements of Two Independent Viscoelastic Functions by Nanoindentation,” Experimental Mechanics 47(1):87–98 (2007).
Oyen, M.L., “Sensitivity of Polymer Nanoindentation Creep Measurements to Experimental Variables,” Acta Materialia 55(11), 3633–3639 (2007).
Seltzer, R., and Mai, Y.-W., “Depth Sensing Indentation of Linear Viscoelastic–Plastic Solids: A Simple Method to Determine Creep Compliance,” Engineering Fracture Mechanics 75(17):4852–4862 (2008).
Christensen, R.M., Theory of Viscoelasticity, 2nd Edition, Dover (2003).
Sneddon, I.N., “The Relation Between Load and Penetration in the Axisymmetric Boussinesq Problem for a Punch of Arbitrary Profile,” The International Journal of Engineering Science 3:47–57 (1965).
Fischer-Cripps, A.C., Nanoindentation 2nd Edition, Springer (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sakaue, K., Okazaki, S. & Ogawa, T. Indentation technique for evaluation of master curve of creep compliance. Exp Tech 35, 16–22 (2011). https://doi.org/10.1111/j.1747-1567.2010.00616.x
Published:
Issue Date:
DOI: https://doi.org/10.1111/j.1747-1567.2010.00616.x