References
Manahan, M.P., Argon, A.S., and Harling, O.K., “The Development of Miniaturized Disk Bend Test for the Determination of Post Irradiation Mechanical Properties”, Journal of Nuclear Materials, Vol.103 and Vol. 104, 1981, pp. 1545.
Lucas, G.E., “Review of Small Specimen Test Technique for Irradiation Testing”, Metallurgical Transaction A, Vol. 21A, May 1990, pp. 1105–1119.
Baik, J.M., Kameda, J. and Buck, O., “Small Punch Test Evaluation of Inter-granular Embrittlement of an Alloy Steel”, Scripta Metallurgica, Vol. 17, 1983, pp. 1443–1447.
Manahan, M.P., “A New Post-irradiation Mechanical Behavior Test: The Miniature Disk Bend Test”, Nuclear Technology, Vol. 63, 1983, pp. 275–295.
Manahan, M.P., Browning, A.E., Argon, A.S., and Harling, O.K., “Miniaturized Disk Bend Test Technique Development and Application”, The use of Small–Scale Specimen for Testing Irradiated Material, STP 888, American Society for Testing and Materials, Philadelphia, 1986, pp. 17–49.
Huang, F.M., Hanilton, M.L., and Wire, G.L., “Bend Testing for Miniature Disks”, Nuclear Technology, Vol. 57, 1982, pp. 234.
Baik, J.M., Kameda, J. and Buck, O., “Development of Small Punch Test for Ductile–Brittle Transition Temperature Measurement of Temper Embrittled Ni–Cr Steel”, In the use of Small–Scale Specimen for Testing Irradiated Material, STP 888, American Society for Testing and Materials, Philadelphia, 1986, pp. 92–111.
Takahashi, H., Shoji, T., Mao, X., Hamaguchi, Y., Misawa, T., Saito, M., Oku, T., Kodaira, T., Fukaya Kiyoshi, F., Nishi, H., and Suzuki, M., “Recommended Practice For Small Punch (SP) Testing of Metallic Materials (Draft)”, Japan Atomic Energy Research Institute, JAERI–M 88–172 (Report), September 1988, pp. 1–19.
Mao, X., Takahashi, H., and Kodaira, T., “Estimation of Mechanical Properties of Irradiated Nuclear Pressure Vessel Steel by use of Sub-sized CT Specimen and Small Punch Specimen”, Scripta Metallurgica, Vol. 25, 1991, pp. 2487–2490.
Foulds, J.R., Woytowitz, P.J., Parnell, T.K., and Jewell, C.W., “Fracture Toughness by Small Punch Testing”, Journal of Testing and Evaluation, JTEVA, Vol. 23, No.1, January 1995, pp. 3–10.
Li, H., Chen, F.C., Ardell, A.J., “A Simple Versatile Miniaturized Disk–Bend Test Apparatus for Quantitative Yield–Stress Measurements”, Metallurgical Transaction A, Vol. 22A, Sep. 1991, pp. 2061–2068.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Husain, A., Sehgal, D.K. & Pandey, R.K. Design of a simple, versatile, small-specimen punch test setup for determination of the mechanical behavior of materials. Exp Tech 26, 33–38 (2002). https://doi.org/10.1111/j.1747-1567.2002.tb00082.x
Published:
Issue Date:
DOI: https://doi.org/10.1111/j.1747-1567.2002.tb00082.x