Conclusion
Residual stresses are intentionally induced into engineering components for the purpose of lowering operational mean stresses, thus, enhancing the fatigue life of such components. One of the concerns pertaining to residual stress is it’s maintainability. Previous studies have indicated that for some type of materials and loading, residual stress relaxation might occur with repeated cyclic loading. In this study, a modified compact tension specimen was designed and used for residual stress relaxation investigation. Different specimens were initially subjected to an overload and subsequently fatigue tested under constant load. All specimens exhibited a certain level of stress relaxation.
Similar content being viewed by others
References
Buehler, H., and Buchholtz, B., “Effect of Residual Stresses upon Bending Fatigue Strength,” Stahl and Eisen, 53, 53, 1330–1332 (1933).
Greyling, F.T., “Stress Relaxation of Metal Working Stresses,” ASTM STP 676, 143–154 (1979).
Jordan, E.H., “Room Temperature Post-Yield Creep,” Experimental Mechanics, 22, 354–360 (1982).
Morrow, J.D., Ross, A.S., and Sinclair, G.M., “Relaxation of Residual Stress due to Fatigue Loading,” SAE Transactions, 68, 40–48 (1960).
Birks, A., and Ludlow, C.G., “Autofrettage Characteristics for High Strength Alloy and Maraging Steels,” ASME PVP, 61, 159–166 (1982).
Brown, D., and Skelton, W.J., “Experimental Results on the Effect of High Cyclic Pressure on the Residual Stresses in Prestressed Thick-Walled Cylinders Made from 2.5% NiCrMoV and 18% Ni Maraging Steels,” ASME PVP, 98, 203–212 (1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Badr, E.A. A modified compact tension specimen for the study of residual stress maintainability. Exp Tech 24, 25–27 (2000). https://doi.org/10.1111/j.1747-1567.2000.tb00907.x
Published:
Issue Date:
DOI: https://doi.org/10.1111/j.1747-1567.2000.tb00907.x