References
Hart-Smith, L.J., “Design Methodology for Bonded-Bolted Composite Joints, Analysis Derivations and Illustrative Solutions,” AFWAL, TR-81-3154, 1 (Feb. 1982).
Verette, R.M. and Labor, L.D., “Structural Criteria for Advanced Composites,” AFFDL-TR-76-142, Air Force Flight Dynamics Laboratory, Dayton, OH (1976).
Garbo, S.P., “Effects of Bearing/Bypass Load Interaction on Laminate Strength,” AFWAL-TR-81-3114 (Sept. 1981).
Concannon, G., “Design Verification Testing of the X-29 Graphite/Epoxy Wing Covers,” Proc. of the Fall Meeting, Soc. of Exp. Stress Anal., Salt Lake City, UT, 96–102 (1983).
Crews, J.H., Jr. and Naik, R.A., “Combined Bearing and Bypass Loading on a Graphite/Epoxy Laminate,” Composite Structures, 6, Nos. 1–3, 21–40 (1986). Also published as NASA TM-87705 (April 1986).
Crews, J.H., Jr., “Bolt-Bearing Fatigue of a Graphite/Epoxy Laminate,” Joining of Composite Materials, ASTM STP 749, K. T. Edward, Ed., ASTM, 131–144 (1981).
Crews, J.H., Jr. and Naik, R.A., “Failure Analysis of a Graphite/Epoxy Laminate Subjected to Bolt-Bearing Loads,” Composite Materials: Fatigue and Fracture, ASTM STP 907, H. T. Hahn, Ed., ASTM, 115–133 (1986). Also published as NASA TM-86297 (Aug. 1984).
Naik, R.A., “An Analytical and Experimental Study of Clearance and Bearing-Bypass Load Effects in Composite Bolted Joints,” PhD Diss., Old Dominion Univ., Norfolk, VA (Aug. 1986).
Eisenmann, J.R., “Bolted Joint Static Strength Model for Composite Materials,” Third Conference on Fibrous Composites in Flight Vehicle Design, NASA TM X-3377 (April 1976).
Ramkumar, R.L., “Bolted Joint Design, Test Methods and Design Allowables for Fibrous Composites,” ASTM STP 734, C.C. Chamis, Ed., 376–395 (1981).
Naik, R.A. and Crews, J.H., Jr., “Ply-Level Failure Analysis of a Graphite/Epoxy Laminate under Bearing-Bypass Loading,” NASA TM-100578 (March 1988). Also presented at the 9th Symposium on Composite Materials: Testing and Design, Reno, NV, April 25–26, 1988. To be published in ASTM STP 1059.
Crews, J.H., Jr. and Naik, R.A., “Bearing-Bypass Loading on Bolted Composite Joints,” Presented at AGARD Symposium on Behavior and Analysis of Mechanically Fastened Joints in Composite Structures, AGARD-CP-427, Madrid, Spain, April 27–29, 1987. Also published as NASA TM-89153, May 1987.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Crews, J.H. An apparatus for bearing-bypass testing of bolted joints. Exp Tech 14, 54–57 (1990). https://doi.org/10.1111/j.1747-1567.1990.tb01131.x
Published:
Issue Date:
DOI: https://doi.org/10.1111/j.1747-1567.1990.tb01131.x