Abstract
The photochemistry of 1-(4-tert-butylphenyl)-tetrahydro-thiopyranium triflate (1), an arylcycloalkylsulfonium salt, was investigated in acetonitrile and methanol at low conversion in order to understand the reaction mechanism and its efficiency as photoacid generator. Both types of C-S bond in 1 are cleaved from the excited state. The heterolytic cleavage of the methylene C-S bond produces 4-t-BuC6H4S(CH2)4CH2+ by ring opening. The carbocation generates acid and arylalkenylsufides by elimination or 1,2 hydride shift and elimination. The predominantly homolytic cleavage of the aryl C-S bond yields 4-t-BuC6H4 and c-C5H10S+ as the fragmentation products. The radicals react with the solvent forming acid, pentamethylene sulfide and tert-butylbenzene. In methanol, the formation of 4-tert-butylanisole indicates a contribution of solvolysis in the excited state of 1 or a competing formation of free aryl cation by heterolytic fragmentation. The acid generation efficiency of 1 in solution (acetonitrile or methanol) is lower than that corresponding to triphenylsulfonium triflate (TPS OTf) under the same conditions. This suggests a pathway for the regeneration of 1 after photocleavage. The photochemistry of 1 is discussed in terms of the contribution of fragmentation and ring opening reaction paths to its overall acid generation efficiency, a key property in terms of its applications in resist formulations.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
L. F. Thompson, C. G. Willson and M. J. Bowden, Introduction to Microlithography, 2nd edn., American Chemical Society, Washington, DC, 1994.
A. Reiser, Photoreactive Polymers: The Science and Technology of Resists, John Wiley and Sons, New York, 1989.
J. F. Cameron, G. Pohlers, Y. Suzuki and N. Chan, Transparency versus Efficiency: Important Considerations in the Design of Photoacid Generators for ArF Lithography J. Photopolym. Sci. Technol. 2002 15 453–464.
R. J. De Voe, P. M. Olofson and M. R. V. Sahyun, in Advances in Photochemistry, Wiley, New York, 1992, vol. 17, pp. 313–355.
C. E. Hoyle, S. F. Thames, L. R. Mullen and D. L. Schmidt, Photoinitiated Polymerization of Aryl Cyclic Sulfonium Salts J. Poly. Sci., Polym. Chem. 2001 39 571–584.
W. Zhou, S. M. Kuebler, D. Carrig, J. W. Perry and S. R. Marder, Efficient Photoacids Based Upon Triarylamine Dialkylsulfonium Salts J. Am. Chem. Soc. 2002 124 1897–1901.
J. L. Dektar and N. P. Hacker, Photochemistry of Triarylsulfonium Salts J. Am. Chem. Soc. 1990 112 6004–6015.
J. D. Coyle, in The Chemistry of the Sulfonium Group, ed. C. J. M. Stirling and S. Patai, Wiley, New York, 1981, Part 1, ch. 5, pp. 107–122.
G. Pohlers, J. C. Scaiano, E. Step and R. Sinta, Ionic vs. Free Radical Pathways in the Direct and Sensitized Photochemistry of 2-(4’Methoxynaphthyl)4,6-Bis(Trichloromethyl)-1,3,5-Triazine: Relevance for Photoacid Generation J. Am. Chem. Soc 1999 121 6167–6175.
F. Ortica, C. Coenjarts, J. C. Scaiano, H. Liu, G. Pohlers and J. F. Cameron, Mechanism of Reaction and Photoacid Generation of N-Oxysuccinimidoarylsulfonate PAGs: A Laser Flash Photolysis Study Chem. Mater. 2001 13 2297–2304.
C. Coenjarts, F. Ortica, J. F. Cameron, G. Pohlers, A. Zampini, D. Desilets, H. Liu and J. C. Scaiano, Mechanism of Reaction and Photoacid Generation of 1,2-Di(Arylsulfonyl)Hydrazine Pags: A Laser Flash Photolysis Study Chem. Mater. 2001 13 2305–2312.
J. W. Knapczyk and W. E. McEwen, Photolysis of Triarylsulfonium Salts in Alcohol J. Org. Chem. 1970 35 2539–2543.
G. Pohlers, J. C. Scaiano and R. Sinta, A Novel Photometric Method for the Determination of Photoacid Generation Efficiencies Using Benzothiazole and Xanthene Dyes as Acid Sensors Chem. Mater. 1997 9 3222–3230.
R. O. Rahn, Potassium Iodide as a Chemical Actinometer for 254 nm Radiation: Use of Iodate as an Electron Scavenger Photochem. Photobiol 1997 66 450–455.
J. V. Crivello and J. H. W. Lam, The Photoinitiated Cationic Polymerization by Dialkyl-4-Hydroxyphenylsulfonium salts J. Polym. Sci., A, Polym. Chem 1980 18 1031–1034.
J. V. Crivello and J. H. W. Lam, Complex Triarylsulfonium Salt Photoinitiators.1. The Identification, Characterization, and Synthesis of a New Class of Triarylsulfonium Salt Photoinitiators J. Polym. Sci., Part A: Polym. Chem. 1980 18 2677–2695.
Y. Suzuki and D. W. Johnson, Photoacid generators in chemically amplified resists, in Microlithography 1998: Advances in Resist Technology and Processing XV, Proceedings of SPIE, ed. W. Conley, SPIE, Bellingham, WA, 1998, vol. 3333, pp. 735–746.
N. Ono, H. Miyake, T. Saito and A. Kaji, A Convenient Synthesis of Sulfides, Formaldehyde Dithioacetals, and Chloromethyl Sulfides Synthesis 1980 952–953.
B. M. Trost and R. Braslau, Tetra-N-Butylammonium Oxone Oxidations under Anhydrous Conditions J. Org. Chem. 1988 53 532–537.
A. McKillop, D. Koyuncu, A. Krief, D. Dumont, P. Renier and M. Trabelsi, Efficient, High Yield Oxidation of Thiols and Selenols to Disulfides and Diselenides. Tetrahedron Lett 1990 31 5007–5010.
E. S. Rothstein and R. W. Saville, Reaction between Aromatic Compounds and Derivatives of Tertiary Acids. II. The Acylation of Benzene Derivatives by Tertiary Acid Chlorides J. Chem. Soc. Abstr. 1949 1950–1954.
G. C. Barnett, in The chemistry of the sulfonium group, ed. C. J. M. Stirling and S. Patai, John Wiley and Sons, 1981, part I, ch. 6, pp. 123–140.
X.-H. Ma, Y. Yamamoto and K. Hayashi, Photoinduced and Radiation-Induced Cationic Polymerizations of Tetrahydrofuran by Various Sulfonium Hexafluorophosphate Salts Macromolecules 1989 22 2853–2854.
J. F. Cameron, N. Chan, K. Moore and G. Pohlers, Performance Tradeoffs in the Design of Photoacid Generators for Arf Lithography J. Photopolym. Sci. Tech. 2001 14 345–356.
F. D. Saeva, in Advances in Electron-Transfer Chemistry, JAI Press, Greenwich, CT, 1994, vol. 4, pp. 1–25.
The half-wave potential (E1/2) for the one electron oxidation of the model compound PhSMe, is 1.47 V (acetonitrile, SCE, Pt electrode, see ref. 27). The oxidation potential for a typical primary alkyl radical, like n-C4H9•, is estimated as 1.4 V (SCE) from its ionization potential, 8.0 eV (see ref. 28), and the relationship between oxidation potential and ionization potential (see ref. 29). The difference between the oxidation potentials (0.07 V) indicates that the reaction between n-C4H9• and PhSMe+• that yields n-C4H9+ and PhSMe, is very slightly exergonic favoring product formation by 1.6 kcal mol−1. By analogy with the pair (n-C4H9•; PhSMe+•), and based on this approximate analysis, a similar behavior can be expected for the intramolecular electron transfer in 4-t-BuC6H4S+•(CH2)4CH2• giving spontaneously 4-t-BuC6H4S(CH2)4CH2+ as a product.
S. Torii, K. Iida and K. Sasaki, Electrochemistry of Organic Sulfur Compounds V. A Polarographic Study on the Anodic Oxidation of Phenyl Sulfides Tetrahedron Lett. 1972 13 4513–4516.
J. Fossey, D. Lefort and J. Sorba, Free Radicals in Organic Chemistry, Wiley, New York, 1995.
L. L. N. Miller, G. D. Mayeda and E. A. Simple, Comprehensive Correlation of Organic Oxidation and Ionization Potentials J. Org. Chem. 1972 37 916–918.
A. L. Maycock and G. A. Berchtold, Photochemical Reactions of Phenacyl- and Benzylsulfonium Salts J. Org. Chem. 1970 35 2532–2538.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sanrame, C.N., Brandao, M.S.B., Coenjarts, C. et al. Mechanism of photoacid generation for an arylcycloalkylsulfonium salt by ring opening and aryl cleavage. Photochem Photobiol Sci 3, 1052–1057 (2004). https://doi.org/10.1039/b408992h
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1039/b408992h