An embedded 3D printing technique — which uses an alginate–polyacrylamide hydrogel supporting matrix and a conductive silver–hydrogel ink — can be used to fabricate hydrogel electronic devices containing various different embedded circuits.
References
Yuk, H., Wu, J. & Zhao, X. Nat. Rev. Mater. 7, 935–952 (2022).
Tian, K. et al. Adv. Mater. 29, 1604827 (2017).
Mishra, A. K. et al. Sci. Robot. 5, eaaz3918 (2020).
Zhu, H. et al. ACS. Appl. Mater. Interfaces 13, 59243–59251 (2021).
Ge, Q. et al. Sci. Adv. 7, eaba4261 (2021).
Yang, C. H. et al. Ext. Mech. Lett. 3, 59–65 (2015).
Yuk, H. et al. Nat. Commun. 11, 1604 (2020).
Hui, Y. et al. Nat. Electron. https://doi.org/10.1038/s41928-022-00887-8 (2022).
Chen, Z. et al. Adv. Funct. Mater. 29, 1900971 (2019).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The author declares no competing interests.
Rights and permissions
About this article
Cite this article
Qu, S. 3D printing of hydrogel electronics. Nat Electron 5, 838–839 (2022). https://doi.org/10.1038/s41928-022-00900-0
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41928-022-00900-0
- Springer Nature Limited