The efficiency of perovskite solar modules is limited by the difficulty in fabricating uniform and high-quality perovskite films. Now, a modified doctor blade method with a surfactant-controlled drying process has been shown to enable high-speed deposition of large-area and uniform perovskite films.
References
Green, M. A. et al. Prog. Photovolt. 26, 3–12 (2018).
Barrows, A. T. et al. Energy Environ. Sci. 7, 2944–2950 (2014).
Chen, H. N., Wei, Z. H., Zheng, X. L. & Yang, S. H. Nano Energy 15, 216–226 (2015).
Ye, F. et al. Energy Environ. Sci. 9, 2295–2301 (2016).
Deng, Y. H. et al. Energy Environ. Sci. 8, 1544–1550 (2015).
Hwang, K. et al. Adv. Mater. 27, 1241–1247 (2015).
Chen, H. et al. Nature 550, 92–95 (2017).
Deng, Y. et al. Nat. Energy https://doi.org/10.1038/s41560-018-0153-9 (2018).
Zheng, X. P. et al. Nat. Energy 2, 17102 (2017).
Cai, M. L. et al. Adv. Sci. 4, 1600269 (2017).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Han, L. Surfactants for smoother films. Nat Energy 3, 545–546 (2018). https://doi.org/10.1038/s41560-018-0193-1
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41560-018-0193-1
- Springer Nature Limited