Abstract
Controlling light properties with diffractive planar elements requires full-polarization channels and accurate reconstruction of optical signal for real applications. Here, we present a general method that enables wavefront shaping with arbitrary output polarization by encoding both phase and polarization information into pixelated metasurfaces. We apply this concept to convert an input plane wave with linear polarization to a holographic image with arbitrary spatial output polarization. A vectorial ptychography technique is introduced for mapping the Jones matrix to monitor the reconstructed metasurface output field and to compute the full polarization properties of the vectorial far field patterns, confirming that pixelated interfaces can deflect vectorial images to desired directions for accurate targeting and wavefront shaping. Multiplexing pixelated deflectors that address different polarizations have been integrated into a shared aperture to display several arbitrary polarized images, leading to promising new applications in vector beam generation, full color display and augmented/virtual reality imaging.
Similar content being viewed by others
Introduction
Widely used 3D stereoscopic displays, which rely on directional or selective projection of polarized images in left and right eyes, respectively, have long been considered as the next generation of displays. Unfortunately, their image reconstruction generally relied on additional bulky optical components such as filters or polarizers, which failed to impact the market for large public applications. Rapid developments in both virtual and augmented reality (VR/AR) are currently generating increasing interest, promising revolutionary new applications in three-dimensional (3D) image rendering and computer-generated virtual imaging. The deployment of these technologies to large public requires compact and lightweight VR/AR headsets capable of addressing image projection independently. In recent years, ultrathin and planar optical elements composed of subwavelength scale elements capable of encoding amplitude, phase and polarization information have been used to manipulate the wavefront of light1,2,3,4,5,6,7, enabling holographic projection8,9,10, thus offering new avenues for lightweight VR/AR headsets. Such artificial interfaces, also dubbed metasurfaces and meta-holograms are based on resonant structures11,12 and/or geometry phase (or Pancharatnam–Berry (PB) phase)13,14,15 to cover a full 2π phase range for encoding the arbitrary holographic phase profile. However, the polarization properties of the meta-hologram image are usually based on co- and cross-polarization related to the incident polarization16,17, leading to limited polarization channels for real applications. Among the other attempts in achieving polarization-dependent holographic metasurfaces, we point out that reflective plasmonic metasurfaces utilizing two plasmonic nanorods per period with different distance and orientation angle can handle arbitrary polarization states but only efficient for oblique incidence18. Vectorial meta-holograms are also realized by combining both the propagation phase and PB phase, which suffers from narrow bandwidth19,20.
Polarization reconstruction, which is based on the superposition of two orthogonal polarization bases, has been widely used in optical science. Circular polarization (CP), respectively, linear polarization (LP), can be generated based on the superposition of two orthogonal LP21, respectively, CP22. However, full-polarization-reconstruction cannot be obtained based on such phase-only difference between two orthogonal bases and its application to arbitrary wavefront control have not been realized.
Here, we demonstrate a full-polarization-reconstructed metasurface that can produce arbitrary polarization for wavefront shaping based on a given LP incident light. The approach discussed in this paper relies on pixelated metasurfaces, in which each pixel acts as a deflector able to encode both the polarization and the holographic phase information, resulting in a holographic image in a specific angle with arbitrary polarization. In addition, the proposed method is broadband for all of the output linear polarizations. The experimental demonstrations, based on the metasurface Jones matrices extraction, are supported by state-of-the-art vectorial ptychography for full electromagnetic field characterization. By integrating multiple subpixels, a multi-directional meta-hologram is achieved for multiplexing polarization channels in different directions.
Results
Design method
The principle of the full-polarization-reconstruction is shown in Fig. 1a, consisting of two phase-gradient supercells. The polarization of the incident light is chosen to be LP in horizontal direction (LP-H) and is decomposed into two CP beams. Relying on PB phase information, any birefringent dielectric building block with an orientation angle of φ can perform the conversion \(|L\rangle \to e^{i2\varphi }|R\rangle\) and \(|R\rangle \to e^{ - i2\varphi }|L\rangle\), i.e., the LCP and RCP beams are transformed to opposite spin with a PB phase of 2φ and −2φ, respectively. To address arbitrary polarization in each pixel, we compose the unit-cells in a counterclockwise-rotated bottom line of meta-molecules disposed with an angle increment of φd, i.e., to deflect the LCP light to the right side with a deflection angle of θt, and a clock-wise rotated top line, arranged with the same angle increment of φd, to deflect the RCP light at the same deflection angle θt. It should be noted that the output polarization from top and bottom lines to the interested deflected angle is pure RCP and LCP. Since the metasurface converts the handiness of the input CP beam and imposes a PB phase gradient in the converted CP beam, only the converted CP beam can be deflected to the interested angle and thus that pure CP beams from top and bottom supercells are obtained. Controlling the orientation angles of the bottom and top lines, i.e., choosing for example φ and −φ + δ, thus introducing independent transmitted phase, respectively, equal to −2φ for the LCP and −2φ + 2δ for the RCP light, we introduce a phase difference of −2δ between the LCP and RCP light responsible for arbitrary polarization reconstruction. The dimension of the dielectric building block in the bottom and top lines can be also adjusted to further control the amplitude difference between RCP and LCP light. Thus, a new state of polarization (SoP) \(|n\rangle\) can be refracted through the superposition of the two CP beams as
where aL and aR are the amplitude of the LCP and RCP beams, respectively. The azimuth angle ψ and ellipticity angle χ of \(|n\rangle\) are derived as ψ = δ and \(\chi = {\textstyle{1 \over 2}}\arcsin {\textstyle{{a_R^2 - a_L^2} \over {a_R^2 + a_L^2}}}\). In this way, an arbitrary full polarization can be reconstructed by changing δ from −π to π and aL, aR from 0 to 1, covering the entire Poincaré sphere as shown in Fig. 1b. The changing of δ leads to the shifting of the SoP along the latitude of the Poincaré sphere, while the changing of aR and aL makes the SoP shift along the longitude direction. When \({\textstyle{{a_R} \over {a_L}}}\) is increasing, the SoP moves toward the top of the Poincaré sphere and vice versa. It is worthy to note that introducing only a phase difference without amplitude modulation can only achieve LP without elliptical polarization (EP) (when aL = aR, χ becomes zero) (see Supplementary Fig. 1). The starting orientation angle of both lines in each pixel results in a detour phase that is exploited to address phase information of the meta-holograms (see Supplementary Figs. 2 and 3), which introduces another freedom to control the detour phase without shifting the structures by displacement of the aperture23,24,25. In order to multiplex the polarization of independent holographic images, we decomposed the metasurfaces in four subpixels (labeled as “C1”, “C2”, “C3”, and “C4”) with different orientation angle increment of φdn (n = 1, 2, 3, 4 corresponded to C1, C2, C3, and C4, respectively, each responsible for the phase and polarization of an independent image at a given deflection angle). For design simplicity, we integrated these four subpixels into one super-pixel as shown in Fig. 1c, leading to a multi-directional meta-hologram with deflected angles given by
where k0 is the wavenumber in the free space and p is the period of the unit-cell. The SoP of the four images can be independently designed to realize a full-polarization-reconstructed and multi-directional meta-hologram as shown in Fig. 1d.
Full-polarized wavefront shaping
For the design of the meta-molecules, we performed full-wave finite-difference time-domain (FDTD) simulations at the wavelength of 600 nm. The unit-cell of the metasurface consists of GaN nano-pillars on a Sapphire substrate with a fixed dimension of Lx = 230 nm, Ly = 120 nm, h = 1 μm and various orientation angles φ for the phase retardation as shown in the inset picture of Fig. 2a (see more details in Supplementary Figs. 5–7). The period of the meta-molecule is 300 nm, which is subwavelength to avoid unwanted diffraction grating, while remaining moderate to achieve fabrication. The incident LCP light is impinging on the pixelated metasurface from the backside, i.e., from the substrate to GaN nanopillar. Each GaN nanopillar acts as a waveplate that converts the spin of CP and introduces a PB phase. More than 91% conversion efficiency and 2π PB phase coverage can be realized in this configuration. Consequently, the metasurfaces with a footprint of 240 μm × 240 μm are fabricated using conventional nanofabrication process26 as shown in Fig. 2b. In the experiment, a linear polarizer is used to generate LP-H incident light and a weakly focusing lens is employed to direct the light on the meta-hologram and produces the holographic image on the projector (see Supplementary Fig. 8). The optical behavior of the meta-hologram is exhaustively quantified and measured experimentally by means of optical vectorial ptychography27,28. This technique, which enables direct mapping of the metasurface Jones Matrices (see Methods and Supplementary Fig. 9), is applied to the characterization of vectorial metasurfaces. Relying on the monitoring of all exiting fields with a lateral sampling period smaller than 500 nm, including amplitude, phase and SoP properties, we could compute the far-field holographic image properties, and retrieve the entire map of the SoP of the generated holographic fields for any given incident illumination polarization.
Multi-directional and multiplexing meta-hologram
As a proof of concept, four SoP of LP-45°, LP-H, RCP, and EP have been designed and experimentally demonstrated. Note that two different methods can be chosen to generate EP. The first one is using different size of GaN nano-pillars for LCP and RCP beams, which inevitably decreases the transmission efficiency. The second one consists in adjusting the number of rows for LCP and RCP beams, respectively, as exploited in this paper. Three rows for LCP and one row for RCP in a sub-pixel are demonstrated for the EP (aL = 3aR, χ = −26.57°) and δ is chosen as −22.5° (ψ = δ = −22.5°). The orientation angle increment of the deflector is chosen as φd = 45°, leading to a deflection angle of θt = 30°. The experimental results of the four beam deflectors agree well with the simulation results (see Supplementary Fig. 10). Subsequently, we encode the holographic phase profile using Gerchberg–Saxton (GS) algorithm into sub-pixel array for the realization of meta-hologram. Although the GS algorithm creates speckled images with random phase, it does not affect the SoP of the meta-hologram which is determined at the pixel level, instead of relying on the interference between different pixels. The designed structures for four SoP and the corresponding fabrication results are shown in Fig. 2c, d, respectively. Figure 2e shows that the holographic images are directed to 30° as expected. The measured SoP of the holographic images are consistent with the designed SoP derived from Eq. (1) as shown in Fig. 2f. The absolute efficiency of each image at the interested order is ηLP+45° = 17.2%, ηLP-H = 15.3%, ηRCP = 25.4%, and ηEP = 20.3%, respectively. The drawback with this encoding pixelation method is that residual ghost images are produced due to the remaining polarization periodicity, equivalent to a grating effect according to (see Supplementary Fig. 12)
Indeed, grating effect occurs for uniformly distributed sub-pixel arrangement, producing multiple grating orders. To better comprehend the encoding method, we have proposed to demonstrate simple beam deflectors integrated with four subpixels arrays using two types of arrangement: uniformly or randomly distributed subpixels as shown in Fig. 3. The results show that for randomly distributed subpixels, i.e., when the lattice constant d in Eq. (3) becomes variable, the grating effect is canceled. As a result, a pure desired order is obtained as shown in Fig. 3j. Four holographic phase profiles are then encoded into these four subpixels arrays denoted by “C1”, “C2”, “C3”, and “C4” as shown in Fig. 4, and choosing four alphabet letters “C”, “N”, “R”, and “S” we realized arbitrary polarization images representing the acronym of the “Centre National de la Recherche Scientifique” (see Fig. 1c). The orientation angle increments of the four pixelated deflectors are φd1 = 23.29°, φd2 = 28.56°, φd3 = 33.71°, and φd4 = 38.75°, which deflect the four hologram images to θt1 = 15°, θt2 = 18.5°, θt0 = 22°, and θt4 = 25.5°, respectively.
As expected, if the subpixels are uniformly distributed (see Fig. 4b), a series of ghost images produced by the grating effect are induced (see Fig. 4c) which can be eliminated with a random arrangement in Fig. 4d, thus exhibiting clean holographic images only at the desired orders as shown in Fig. 4e. The measured map of the Jones matrices for both periodic and random pixelated interfaces have been realized in Fig. 4f, g (see more details in Supplementary Fig. 13). The corresponding far-field holographic image properties of the randomly distributed meta-hologram are shown in Fig. 4h, confirming remarkably the expected SoP orientations, and ellipticities for each letter of the pattern (see more details in Supplementary Fig. 14).
To further analyze the SoP of the four letters and confront vectorial ptychography with classical far-field measurements, we insert a polarimeter in front of each separated letter as shown in Fig. 5a. The measured SoP agrees well to the theoretical designs and ptychography reconstructed fields (see Fig. 5b). A quarter waveplate with fast axis at angle θλ/4 and a linear polarizer with transmission axis at angle θLP are selectively placed in front of the four images (see Fig. 5c and Supplementary Fig. 8) to block specific letters of “C”, “N”, “R”, and “S” as shown in Fig. 5d, exhibiting multiplexing properties of the meta-hologram.
Discussion
In conclusion, we have demonstrated a general method for wavefront shaping with arbitrary output polarization that allows full utilization of polarization channels. Pixelated deflectors are proposed to encode the information of polarization and phase profile. By randomly distributing the subpixels, a multi-directional meta-hologram is designed to display multi-holographic images in different directions. The general polarization imaging method discussed in this manuscript, could be applied for example to the realization of lightweight VR/AR displays. More importantly, such wavefront-shaping device that can spatially tailor the polarization and intensity light profile, could be further expanded toward a plethora of promising applications in vector beam generation, visible light communication, full color display, and animation production, etc.
Methods
Device fabrication
The meta-holograms are fabricated by patterning a 1-μm-thick GaN thin-film grown on a double-side polished c-plan sapphire substrate using a molecular beam epitaxy (MBE) RIBER system. Conventional electron beam lithography (EBL) is used to pattern the GaN nano-pillars. A double layer of ∼200 nm PMMA resist (495A4) is spin-coated on the GaN thin-film and then is baked on a hot plate with temperature of 125 °C. E-beam resist exposition is performed at 20 keV (Raith ElphyPlus, Zeiss Supra 40), followed by PMMA development using 3:1 IPA:MIBK solution. After Ni deposition of 50-nm thick using E-beam evaporation, the sample is immersed into the acetone solution for 2 h for the lift-off process, resulting in a Ni pattern as hard mask. Followed by reactive ion etching (RIE, Oxford system) with a plasma composed of Cl2CH4Ar gases, the GaN nano-pillars are created. Finally, the Ni hard mask on the top of GaN nano-pillars is removed by using chemical etching with 1:2 HCl:HNO3 solution. It is worth to note that there is possibility of realizing metasurface with similar functionalities by nanoimprint lithography using high dielectric constant and low loss materials. The proposed metasurface can be further applied to the curved or conformal substrates by using soft materials like PDMS29,30,31.
Optical setup
The primary optical setup for characterizing the meta-hologram is shown in Supplementary Fig. 8. A laser beam at a wavelength of 600 nm propagates through a broadband linear polarizer (10GT04, Newport) with axis of transmission in horizontal direction. The LP-H beam is weakly focused by an achromatic lens with a focal length of 50 mm onto the meta-hologram, which is mounted on a three-dimensional translation stage. The holographic image is projected onto a projector placed 10 cm away from the meta-hologram. A selected quarter waveplate with fast axis at angle θλ/4 and a linear polarizer with axis of transmission at angle θLP are used to block selected images. Assume an incident beam Ein propagates through the selected quarter waveplate and linear polarizer, the output electric field Eout is described as \({\mathbf{E}}_{{\mathbf{out}}} = A_{LP}\left( {\theta _{LP}} \right)A_{\lambda /4}( {\theta _{\lambda /4}} ){\mathbf{E}}_{{\mathbf{in}}}\). Selected rotation angle θλ/4 and θLP are chosen to block the specific output images (i.e., Eout = 0).
Measurement of efficiency
The efficiency of the holographic image was defined as the ratio of the total power of the image at the interested order to the incident power. The power of the holographic image was measured by a power meter (Newport: Model 843-R). The incident power was measured as light passing through an aperture with the same size of the meta-hologram.
Vectorial ptychography
Ptychography is a recently developed quantitative phase imaging microscopy method inherited from lens-less approaches. In its basic scalar version, is based on the acquisition of series of diffraction intensity patterns recorded by illuminating an object at several overlapping positions with a finite-size spatially-coherent probe (see Supplementary Fig. 9a). If one can assume that the illumination P interacts with the illuminated object J in a multiplicative way, then the diffracted intensity distribution, at the j-th scanning position, writes
and one can show that, under proper scanning and sampling measurement conditions, the image of the scanned object (i.e., its complex amplitude) can be reconstructed numerically by means of an iterative algorithm32, with a transverse resolution mainly determined by the extreme angles with which the diffracted intensity patterns are collected (see Supplementary Fig. 9a).
The vectorial version of ptychography used in this work is a generalized version imaging objects that affects the SoP of light. Namely, the previous equation remains valid, but requires writing the illumination vectorial field distribution P(r) as a so-called Jones vector map33,
while the object to be reconstructed takes now the mathematical form of Jones matrix map
In previous works, we have demonstrated theoretically34 and experimentally27 how to use polarized illuminating probes, together with recording of the intensity diffraction patterns behind an analyzer, in order to reconstruct the Jones matrix map of the investigated object, in addition to the joint reconstruction of the each illumination probe used in the measurement, detailed in ref. 28.
Although there exist various microscopy techniques dedicated to quantitative phase imaging or SoP imaging, vectorial ptychography is the only approach that can image the Jones matrix, which encompasses both aspects together, in a robust and reference-free manner. Here in the context of meta-holograms, the knowledge of the Jones matrix map is crucial since (i) it provides an exhaustive characterization of the component on its entire area at a microscopic resolution, including all amplitude, phase, and polarization effects, (ii) it allows to compute, by simple propagation, the vectorial far field of the holographic image, for any desired input illumination (see Supplementary Fig. 9c).
Optical vectorial ptychography
Measurements were carried out on a custom setup27, operating at the wavelength of 635 nm, which is slightly different to the initial design wavelength of 600 nm due to the setup limitation. However, the polarization of the holographic image is weakly related to the wavelength, only depending on the accumulated phase difference variation between top RCP and bottom LCP beams, however, both vary similarly versus the wavelength21. The meta-holograms were placed on a motorized stage (U-780, Physik Instrumente) and scanned under a finite sized probe with effective diameter of 50 μm, selected optically by placing a 2-mm diameter iris diaphragm in the image plane of a ×40 objective lens (ACHN-P, NA 0.65, Olympus). The camera (Stingray F-145B, Allied Vision, 320 × 240 effective pixels of 25.8 × 25.8 μm2 after binning) was placed 190 mm after the diaphragm. This configuration results in a final reconstructed map of the Jones matrix spatially sampling at 360 and 490 nm along the horizontal and vertical direction, respectively, which allows to resolve the individual subpixels of the meta-hologram. Consequently to the metasurface operation regime, the subwavelength spacing of the individual nanorods cannot be resolved. The camera acquisition time was set to benefit from the whole dynamical range of the acquisition setup. The raster-scan grid contained 1122 points with average steps of 7.3 µm along the two directions. All scans included additional random step fluctuations of ±50%, in order to avoid periodic reconstruction artefacts. At each scanning position, three linearly polarized probes at angles of 0, 60, 120° in the object plane and three linear analyses at angles 0, 60, 120° were used, resulting in nine different combinations. Object reconstructions were performed by means of the conjugate gradient algorithm, allowing the estimation of Jones matrices of the meta-holograms, jointly with the estimation of the three illumination probes used for the measurement28. Jones matrices reconstruction are been obtained after 530 iterations, run on a multi-graphics-processor-unit (DGX Station, NVIDIA). The vectorial E(r) exit field is further given, at every point r of the metasurface, by the matrix product
where the Jones vector to the right represents the LP illumination, with an angle α set to 1.9°, in order to match the orientation of the meta-hologram on the setup. The vectorial far-field Ef was obtained by computing the far-field propagation by fast Fourier transform (FFT)
allowing to quantify, by time evolution, the SoP, ellipticities and polarization orientations for both E(r) and Ef.
Data availability
Ptychography raw data and other data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Yu, N. et al. Light propagation with phase discontinuities: generalized laws of reflection and refraction. Science 334, 333–337 (2011).
Zheng, G. et al. Metasurface holograms reaching 80% efficiency. Nat. Nanotechnol. 10, 308–312 (2015).
Ni, X., Wong, Z. J., Mrejen, M., Wang, Y. & Zhang, X. An ultrathin invisibility skin cloak for visible light. Science 349, 1310–1314 (2015).
Li, S.-Q. et al. Phase-only transmissive spatial light modulator based on tunable dielectric metasurface. Science 364, 1087–1090 (2019).
Chen, W. T. et al. A broadband achromatic metalens for focusing and imaging in the visible. Nat. Nanotechnol. 13, 220–226 (2018).
Wang, S. et al. A broadband achromatic metalens in the visible. Nat. Nanotechnol. 13, 227–232 (2018).
Zhu, W. et al. A flat lens with tunable phase gradient by using random access reconfigurable metamaterial. Adv. Mater. 27, 4739–4743 (2015).
Wan, W., Gao, J. & Yang, X. Metasurface holograms for holographic imaging. Adv. Opt. Mater. 5, 1700541 (2017).
Huang, L., Zhang, S. & Zentgraf, T. Metasurface holography: from fundamentals to applications. Nanophotonics 7, 1169–1190 (2018).
Deng, Z.-L. & Li, G. Metasurface optical holography. Mater. Today Phys. 3, 16–32 (2017).
Chen, W. T. et al. High-efficiency broadband meta-hologram with polarization-controlled dual images. Nano Lett. 14, 225–230 (2014).
Huang, Y.-W. et al. Aluminum plasmonic multicolor meta-hologram. Nano Lett. 15, 3122–3127 (2015).
Deng, J. et al. Spatial frequency multiplexed meta-holography and meta-nanoprinting. ACS Nano 13, 9237–9246 (2019).
Huang, L. et al. Three-dimensional optical holography using a plasmonic metasurface. Nat. Commun. 4, 2808 (2013).
Wang, B. et al. Visible-frequency dielectric metasurfaces for multiwavelength achromatic and highly dispersive holograms. Nano Lett. 16, 5235–5240 (2016).
Wen, D. et al. Helicity multiplexed broadband metasurface holograms. Nat. Commun. 6, 8241 (2015).
Zhao, R. et al. Multichannel vectorial holographic display and encryption. Light Sci. Appl. 7, 95 (2018).
Deng, Z.-L. et al. Diatomic metasurface for vectorial holography. Nano Lett. 18, 2885–2892 (2018).
Arbabi, A., Horie, Y., Bagheri, M. & Faraon, A. Dielectric metasurfaces for complete control of phase and polarization with subwavelength spatial resolution and high transmission. Nat. Nanotechnol. 10, 937–943 (2015).
Arbabi, E., Kamali, S. M., Arbabi, A. & Faraon, A. Vectorial holograms with a dielectric metasurface: ultimate polarization pattern generation. ACS Photonics 6, 2712–2718 (2019).
Yu, N. et al. A broadband, background-free quarter-wave plate based on plasmonic metasurfaces. Nano Lett. 12, 6328–6333 (2012).
Wu, P. C. et al. Versatile polarization generation with an aluminum plasmonic metasurface. Nano Lett. 17, 445–452 (2017).
Deng, Z.-L., Zhang, S. & Wang, G. P. A facile grating approach towards broadband, wide-angle and high-efficiency holographic metasurfaces. Nanoscale 8, 1588–1594 (2016).
Khorasaninejad, M., Ambrosio, A., Kanhaiya, P. & Capasso, F. Broadband and chiral binary dielectric meta-holograms. Sci. Adv. 2, e1501258 (2016).
Deng, Z.-L. et al. Facile metagrating holograms with broadband and extreme angle tolerance. Light Sci. Appl. 7, 78 (2018).
Brière, G. et al. An etching‐free approach toward large‐scale light‐emitting metasurfaces. Adv. Opt. Mater. 7, 1801271 (2019).
Ferrand, P., Baroni, A., Allain, M. & Chamard, V. Quantitative imaging of anisotropic material properties with vectorial ptychography. Opt. Lett. 43, 763 (2018).
Baroni, A., Allain, M., Li, P., Chamard, V. & Ferrand, P. Joint estimation of object and probes in vectorial ptychography. Opt. Express 27, 8143 (2019).
Kamali, S. M., Arbabi, A., Arbabi, E., Horie, Y. & Faraon, A. Decoupling optical function and geometrical form using conformal flexible dielectric metasurfaces. Nat. Commun. 7, 11618 (2016).
Song, Q. H. et al. Split Archimedean spiral metasurface for controllable GHz asymmetric transmission. Appl. Phys. Lett. 114, 151105 (2019).
Song, Q. et al. Water-resonator-based metasurface: an ultrabroadband and near-unity absorption. Adv. Opt. Mater. 5, 1601103 (2017).
Faulkner, H. M. L. & Rodenburg, J. M. Movable aperture lensless transmission microscopy: a novel phase retrieval algorithm. Phys. Rev. Lett. 93, 023903 (2004).
Jones, R. C. A new calculus for the treatment of optical systems: I. description and discussion of the calculus. Josa 31, 488–493 (1941).
Ferrand, P., Allain, M. & Chamard, V. Ptychography in anisotropic media. Opt. Lett. 40, 5144 (2015).
Acknowledgements
We acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant agreement nos. 639109 and 724881).
Author information
Authors and Affiliations
Contributions
Q.S. and P.G. conceived the idea and carried out the experiment. Q.S. performed the numerical simulation, calculation of meta-hologram, and optical characterization of meta-hologram; A.B. and P.F. performed the ptychography measurement; Q.S., R.S., P.N., V.B., S.K., and S.C. contributed to the nanofabrication; S.V., B.D., and P.D.M. performed the GaN MBE growth; P.G. supervised and coordinated the project; all the authors contributed and approved the paper.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks Zi-Lan Deng, Pin Chieh Wu and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Song, Q., Baroni, A., Sawant, R. et al. Ptychography retrieval of fully polarized holograms from geometric-phase metasurfaces. Nat Commun 11, 2651 (2020). https://doi.org/10.1038/s41467-020-16437-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-16437-9
- Springer Nature Limited
This article is cited by
-
Vectorial liquid-crystal holography
eLight (2024)
-
Mechanically reconfigurable metasurfaces: fabrications and applications
npj Nanophotonics (2024)
-
Reaching the efficiency limit of arbitrary polarization transformation with non-orthogonal metasurfaces
Nature Communications (2024)
-
Geometric phase-encoded stimuli-responsive cholesteric liquid crystals for visualizing real-time remote monitoring: humidity sensing as a proof of concept
Light: Science & Applications (2024)
-
Advances in information processing and biological imaging using flat optics
Nature Reviews Electrical Engineering (2024)