Abstract
Lead-free solution-processed solid-state photovoltaic devices based on methylammonium tin iodide (CH3NH3SnI3) perovskite semiconductor as the light harvester are reported. Featuring an optical bandgap of 1.3 eV, the CH3NH3SnI3 perovskite material can be incorporated into devices with the organic hole-transport layer spiro-OMeTAD and show an absorption onset at 950 nm, which is significantly redshifted compared with the benchmark CH3NH3PbI3 counterpart (1.55 eV). Bandgap engineering was implemented by chemical substitution in the form of CH3NH3SnI3–xBrx solid solutions, which can be controllably tuned to cover much of the visible spectrum, thus enabling the realization of lead-free solar cells with an initial power conversion efficiency of 5.73% under simulated full sunlight. Further efficiency enhancements are expected following optimization and a better fundamental understanding of the internal electron dynamics and corresponding interfacial engineering. The reported CH3NH3SnI3–xBrx perovskite solar cells represent a step towards the realization of low-cost, environmentally friendly solid-state solar cells.
Similar content being viewed by others
References
Bisquert, J. Photovoltaics: the two sides of solar energy. Nature Photon. 2, 648–649 (2008).
Chung, I., Lee, B., He, J., Chang, R. P. H. & Kanatzidis, M. G. All-solid-state dye-sensitized solar cells with high efficiency. Nature 485, 486–489 (2012).
Kojima, A., Teshima, K., Shirai, Y. & Miyasaka, T. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050–6051 (2009).
Etgar, L. et al. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells. J. Am. Chem. Soc. 134, 17396–17399 (2012).
Kim, H.-S. et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 10.1038/srep00591(2012).
Heo, J. H. et al. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors. Nature Photon. 7, 487–492 (2013).
Liu, M., Johnston, M. B. & Snaith, H. J. Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature 501, 395–398 (2013).
Burschka, J. et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316–319 (2013).
Kim, H.-S. et al. High efficiency solid-state sensitized solar cell-based on submicrometer rutile TiO2 nanorod and CH3NH3PbI3 perovskite sensitizer. Nano Lett. 13, 2412–2417 (2013).
Abrusci, A. et al. High-performance perovskite–polymer hybrid solar cells via electronic coupling with fullerene monolayers. Nano Lett. 13, 3124–3128 (2013).
Edri, E., Kirmayer, S., Cahen, D. & Hodes, G. High open-circuit voltage solar cells based on organic–inorganic lead bromide perovskite. J. Phys. Chem. Lett. 4, 897–902 (2013).
Bi, D., Yang, L., Boschloo, G., Hagfeldt, A. & Johansson, E. M. J. Effect of different hole transport materials on recombination in CH3NH3PbI3 perovskite-sensitized mesoscopic solar cells. J. Phys. Chem. Lett. 4, 1532–1536 (2013).
Ball, J. M., Lee, M. M., Hey, A. & Snaith, H. J. Low-temperature processed meso-superstructured to thin-film perovskite solar cells. Energy Environ. Sci. 6, 1739–1743 (2013).
Laban, W. A. & Etgar, L. Depleted hole conductor-free lead halide iodide heterojunction solar cells. Energy Environ. Sci. 6, 3249–3253 (2013).
Borriello, I., Cantele, G. & Ninno, D. Ab initio investigation of hybrid organic–inorganic perovskites based on tin halides. Phys. Rev. B 77, 235214 (2008).
Mitzi, D. B. Synthesis, structure, and properties of organic–inorganic perovskites and related materials. Prog. Inorg. Chem. 48, 1–121 10.1002/9780470166499.ch1(1999).
Kagan, C. R., Mitzi, D. B. & Dimitrakopoulos, C. D. Organic–inorganic hybrid materials as semiconducting channels in thin-film field-effect transistors. Science 286, 945–947 (1999).
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N. & Snaith, H. J. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 338, 643–647 (2012).
Snaith, H. J. Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells. J. Phys. Chem. Lett. 4, 3623–3630 (2013).
Park, N.-G. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell. J. Phys. Chem. Lett. 4, 2423–2429 (2013).
Hodes, G. Perovskite-based solar cells. Science 342, 317–318 (2013).
Bisquert, J. The swift surge of perovskite photovoltaics. J. Phys. Chem. Lett. 4, 2597–2598 (2013).
Stoumpos, C. C., Malliakas, C. D. & Kanatzidis, M. G. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties. Inorg. Chem. 52, 9019–9038 (2013).
Xing, G. et al. Long-range balanced electron- and hole-transport lengths in organic–inorganic CH3NH3PbI3 . Science 342, 344–347 (2013).
Stranks, S. D. et al. Electron–hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342, 341–344 (2013).
Umari, P., Mosconi, E. & de Angelis, F. Relativistic solar cells. Preprint at http://arxiv-web.arxiv.org/abs/1309.4895 (2013).
Gate, L. F. Comparison of the photon diffusion model and Kubelka–Munk equation with the exact solution of the radiative transport equation. Appl. Opt. 13, 236–238 (1974).
Rein, S. Lifetime Spectroscopy: A Method of Defect Characterization in Silicon for Photovoltaic Applications (Springer, 2004).
Takahashi, Y., Hasegawa, H., Takahashi, Y. & Inabe, T. Hall mobility in tin iodide perovskite CH3NH3SnI3: evidence for a doped semiconductor. J. Solid State Chem. 205, 39–43 (2013).
Ito, S. et al. Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%. Thin Solid Films 516, 4613–4619 (2008).
Bach, U. et al. Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies. Nature 395, 583–585 (1998).
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N. & Seok, S. I. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells. Nano Lett. 13, 1764–1769 10.1021/nl3007165(2013).
Kim, H.-S. et al. Mechanism of carrier accumulation in perovskite thin-absorber solar cells. Nature Commun. 4, 2242 10.1038/ncomms3242(2013).
Docampo, P. & Snaith, H. J. Obviating the requirement for oxygen in SnO2-based solid-state dye-sensitized solar cells. Nanotechnology 22, 225403 (2011).
Mitzi, D. B., Dimitrakopoulos, C. D. & Kosbar, L. L. Structurally tailored organic–inorganic perovskites: optical properties and solution-processed channel materials for thin-film transistors. Chem. Mater. 13, 3728–3740 (2001).
Acknowledgements
The authors thank T. Marks for use of the solar simulator and IPCE measurement system. Electron microscopy and elemental analysis were carried out at the Electron Probe Instrumentation Center (EPIC) at Northwestern University. This research was supported as part of the ANSER Center, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences (award no. DE-SC0001059) and ISEN at Northwestern University.
Author information
Authors and Affiliations
Contributions
M.G.K. conceived the experiments and directed the study. F.H. and C.C.S. carried out the material synthesis, device fabrication and performance measurements. D.H.C. prepared the TiO2 blocking layer for the electrodes. R.P.H.C. contributed to the revision of the manuscript. All authors discussed the results and commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary information
Supplementary information (PDF 1078 kb)
Rights and permissions
About this article
Cite this article
Hao, F., Stoumpos, C., Cao, D. et al. Lead-free solid-state organic–inorganic halide perovskite solar cells. Nature Photon 8, 489–494 (2014). https://doi.org/10.1038/nphoton.2014.82
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nphoton.2014.82
- Springer Nature Limited
This article is cited by
-
Mixed tin-lead perovskites with balanced crystallization and oxidation barrier for all-perovskite tandem solar cells
Nature Communications (2024)
-
Efficient tin-based perovskite solar cells with trans-isomeric fulleropyrrolidine additives
Nature Photonics (2024)
-
A computational study of electronic, optical, and mechanical properties of novel Ba3SbI3 perovskite using DFT
Optical and Quantum Electronics (2024)
-
Comprehensive analysis of heterojunction compatibility of various perovskite solar cells with promising charge transport materials
Scientific Reports (2023)
-
Octahedron distortion-triggered dipole–spin interaction in multiferroic magnetoelectric perovskites
NPG Asia Materials (2023)