High-performance polymer solar cells are normally processed with halogenated solvents, which are toxic and hazardous. Now, high power-conversion efficiency in bulk-heterojunction devices is achieved by using a non-toxic hydrocarbon solvent through an environmentally friendly processing route.
References
Yu, G., Gao, J., Hummelen, J. C., Wudl, F. & Heeger, A. J. Science 270, 1789–1791 (1995).
Liao, S.-H. et al. Sci. Rep. 4, 6813 (2014).
Liu, Y. et al. Nature Commun. 5, 5293 (2014).
He, Z. et al. Nature Photon. 9, 174–179 (2015).
Yusoff, A. R. B. M. et al. Energy Environ. Sci. 8, 303–316 (2015).
Cai, W. et al. Adv. Sci. 2, 1500095 (2015).
Zhao, J. et al. Nature Energy 1, 15027 (2016).
Lee, J. K. et al. J. Am. Chem. Soc. 130, 3619–3623 (2008).
Liu, F., Gu, Y., Jung, J. W., Jo, W. H. & Russell, T. P. J. Polym. Sci. Part B Polym. Phys. 50, 1018–1044 (2012).
Chen, Z. et al. Adv. Mater. 26, 2586–2591 (2014).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Luo, G., Wu, H. Organic solar cells: Going green. Nat Energy 1, 16001 (2016). https://doi.org/10.1038/nenergy.2016.1
Published:
DOI: https://doi.org/10.1038/nenergy.2016.1
- Springer Nature Limited
This article is cited by
-
Overcoming Carrier Concentration Limits in Polycrystalline CdTe Thin Films with In Situ Doping
Scientific Reports (2018)