Abstract
THE large-scale use of photovoltaic devices for electricity generation is prohibitively expensive at present: generation from existing commercial devices costs about ten times more than conventional methods1. Here we describe a photovoltaic cell, created from low-to medium-purity materials through low-cost processes, which exhibits a commercially realistic energy-conversion efficiency. The device is based on a 10-µm-thick, optically transparent film of titanium dioxide particles a few nanometres in size, coated with a monolayer of a charge-transfer dye to sensitize the film for light harvesting. Because of the high surface area of the semiconductor film and the ideal spectral characteristics of the dye, the device harvests a high proportion of the incident solar energy flux (46%) and shows exceptionally high efficiencies for the conversion of incident photons to electrical current (more than 80%). The overall light-to-electric energy conversion yield is 7.1-7.9% in simulated solar light and 12% in diffuse daylight. The large current densities (greater than 12 mA cm-2) and exceptional stability (sustaining at least five million turnovers without decomposition), as well as the low cost, make practical applications feasible.
Similar content being viewed by others
References
Bucher, K. & Fricke, J. Phys. Zeit 21, 237–244 (1980).
Honda, K. & Fujishima, A. Nature 238, 37–39 (1972).
Tufts, B. J. et al. Nature 326, 681–683 (1987).
Gerischer, H. Electrochim. Acta 35, 1677 (1990).
Licht, S., Hodes, G., Tenne, R. & Manassen, J. Nature 326, 863–864 (1987).
Heller, A. Acc. chem. Res. 14, 154–162 (1981).
Nozik, A. J. Phil. Trans. R. Soc. Lond. A295, 453–470 (1980).
Tributsch, H. & Bennet, J. C. J. electroanal. Chem. 81, 97 (1977).
Wrighton, M. S. Acc. chem. Res. 12, 303–310 (1979).
Bard, A. J. Science 207, 139 (1980).
Memming, R. Phil. Tech. Rev. 38, 160 (1979).
Matsumura, M., Nomura, Y. & Tsubomura, H. Bull. chem. Soc. Japan 50, 2533 (1977).
Alonso, N., Beley, V. M., Chariter, P. & Ern, V. Rev. Phys. Appl. 16, 5 (1981).
Willig, F., Eichberger, R., Sundaresan, N. S. & Parkinson, B. A. J. Am. chem. Soc. 112, 2702–2707 (1990).
Amadelli, R., Argazzi, R., Bignozzi, C. A. & Scandola, F. J. Am. chem. Soc. 112, 7099–7103 (1990).
Nazeeruddin, M. K., Liska, P., Moser, J., Vlachopoulos, N. & Grätzel, M. Helv. chim. Acta 73, 1788–1803 (1990).
Juris, A., Balzani, V., Barigletti, F., Campagna, S., Belzer, B. Coord. Chem. Rev. 84, 85 (1988).
Anderson, M. A., Gieselmann, M. J. & Xu, Q. J. Membrane Sci. 392, 43 (1988).
O'Regan, B., Moser, J., Anderson, M. & Grätzel, M. J. phys. Chem. 94, 8720–8726 (1990).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
O'Regan, B., Grätzel, M. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353, 737–740 (1991). https://doi.org/10.1038/353737a0
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1038/353737a0
- Springer Nature Limited
This article is cited by
-
Potential and challenges of computing with molecular materials
Nature Materials (2024)
-
Improvement of the photoelectric dye sensitized solar cell performance using Fe/S–TiO2 nanoparticles as photoanode electrode
Scientific Reports (2024)
-
Recent progress toward high-performance dye-sensitized solar cells: a review
Journal of the Iranian Chemical Society (2024)
-
One-step method to simultaneously grow TiO2 compact and porous layers for DSSC photoelectrodes
Applied Nanoscience (2024)
-
Chemical bath deposition of mercury bismuth sulfide (HgBi2S3) sensitized titanium dioxide (TiO2) thin films: An In-depth analysis and characterization study
Applied Physics A (2024)