Abstract
NTC resistors (‘thermistors’) can be used for measuring intravascular blood flow1,2. The thermistor is heated by an electric current and cooled by the flowing blood. So its temperature is a function of the blood flow rate in its immediate environment, and since the thermistor's electric resistance increases some 5 per cent for a temperature drop of 1°C., resistance measurement provides a fairly sensitive method for the determination of flow. Mounting very small NTC beads in a cardiac catheter, Delaunois3 succeeded in recording the blood flow in the large vessels without opening the thorax. An NTC bead, having a diameter of 0.5 mm. was placed in a small cavity made in the side wall of a catheter near the tip and fixed with a plastic cement. The quantitative determination of flow rates by this method has not yet been entirely successful because of several difficulties, such as the large influence of small blood temperature variations and the complicated calibration procedure.
Similar content being viewed by others
References
Felix, W., and Groll, H., Z. Biol., 106, 208 (1953).
Felix, W., Z. Biol., 108, 121 (1955).
Delaunois, A. L., 20th Internat. Physiol. Congress, Brussels, p. 228 (1956).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
ZIJLSTRA, W., BRUNSTING, J. & v.d. SLIKKE, L. Intravascular and Intracardiac Blood Velocity Patterns recorded by means of NTC Resistors. Nature 184, 991–992 (1959). https://doi.org/10.1038/184991b0
Issue Date:
DOI: https://doi.org/10.1038/184991b0
- Springer Nature Limited
This article is cited by
-
Structural and electrical transport studies in Bi-substituted Yttrium Chromite
Journal of Materials Science: Materials in Electronics (2017)
-
Zur Pulmonalklappeninsuffizienz
Archiv für Kreislaufforschung (1965)
-
Die Größe der Kammervolumina des rechten Ventrikels unter verschiedenen hämodynamischen Bedingungen
Archiv für Kreislaufforschung (1965)