Abstract
Modeling of processes leading to fracture is required for the development of efficient nondestructive methods for monitoring strength. The model used in this study describes acoustic emission at the stage of delocalized microcrack formation that precedes crack formation or crack pop-in, relates fracture and elastic radiation parameters, and shows directions for experimental studies and approaches to the development and modification of diagnostic methods. A model for the coefficient of the similarity of acoustic emission of elastic radiation to fine fracture is considered. The dependence of its parameters on different factors involved in acoustic-emission tests is shown for welded joint samples.
Similar content being viewed by others
REFERENCES
Ivanov, V.I. and Belov, V.M., Akustiko-emissionnyi kontrol' svarki i svarnykh soedinenii(Acoustic-Emission Monitoring of Welding and Welded Joints), Moscow: Mashinostroenie, 1981.
Greshnikov, V.A. and Drobot, Yu.V., Akusticheskaya emissiya. Primenenie dlya ispytanii materialov i izdelii(Acoustic Emission. Use for Testing Materials and Articles), Moscow: Izd. Standartov, 1976.
Baranov, V.M. and Molodtsov, K.I., Akustiko-emissionnye pribory yadernoi energetiki(Acoustic Emission Instruments for Nuclear Engineering), Moscow: Atomizdat, 1980.
Nosov, V.V. and Potapov, A.I., Structural Simulation Model of Acoustic Emission Parameters, Defektoskopiya, 1996, no. 6, pp. 30–38.
Nosov, V.V. and Potapov, A.I., About Choosing the Approach to the Development of Nondestructive Methods for Monitoring the Strength of Articles Based on the Use of the Acoustic Emission Phenomenon, Defektoskopiya, 1996, no. 6, pp. 39–44.
Nosov, V.V., Procedure for the Determination of Informative Parameters of Acoustic Emission, Defektoskopiya, 1998, no. 5, pp. 91–98.
Nosov, V.V. and Potapov, A.I., Assessment of the Strength of Frame Parts in Hydraulic Tests Based on Acoustic Emission Data, Defektoskopiya, 1998, no. 5, pp. 99–107.
Frolov, D.I., Kil'keev, R.Sh., Kukseenko, V.S., and Novikov, S.V., Relationship between the Parameters of Acoustic Signals and Dimensions of Discontinuities in the Fracture of Heterogeneous Materials, Mekhanika Kompozitnykh Materialov, 1980, no. 5, pp. 907–911.
Tripalin, A.S. and Builo, S.I., Akusticheskaya Emissiya. Fiziko-mekhanicheskie aspekty(Acoustic Emission. Physical-Mechanical Aspects), Izd. Rostovskogo Universiteta, 1986.
Baranov, V.M. and Gryazev, A.P., Acoustic Radiation during Expansion of a Spherical Cavity in Isotropic Elastic Medium, Defektoskopiya, 1979, no. 11, pp. 28–34.
Nefed'ev, E.Yu., Volkov, V.A., Kudryashov, S.V., Lyashkov, A.I. and Savel'ev, V.N., Relationship between Microcrack Size and Acoustic Emission Parameters and the Structure of Deformed Rotor Steel, Defektoskopiya, 1986, no. 3, pp. 41–44.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Nosov, V.V., Burakov, I.N. A Micromechanical Model of Acoustic Emission of Heterogeneous Materials. Russian Journal of Nondestructive Testing 40, 113–119 (2004). https://doi.org/10.1023/B:RUNT.0000036554.32983.4a
Issue Date:
DOI: https://doi.org/10.1023/B:RUNT.0000036554.32983.4a