Skip to main content
SpringerLink
Log in

Modern State of Nondestructive Testing of Mechanical Properties and Stamping Ability of Steel Sheets in a Manufacturing Technological Flow

  • Published:
Russian Journal of Nondestructive Testing Aims and scope Submit manuscript

Abstract

The modern state of methods and instruments of nondestructive testing of mechanical properties and stamping ability in a manufacturing technological flow is systematized and analyzed. The underlying principles of designing and features of operation of these instruments, as well as their basic advantages and limitations and ways of reducing the effect of interfering factors, are considered.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Reference

  1. Zlobina, S.I. and Lepisa, L.V., Statistical Testing of Strength and Plastic Properties of Rolled Products from Carbon Steel, Zavodskaya Laboratoriya, 1992, vol. 58, no.7, p. 61.

    Google Scholar 

  2. Korkhin, A.S., Statistical Testing of Mechanical Properties of Metal Production (Dynamic Approach), Zavodskaya Laboratoriya, 1995, vol. 61, no. 5, pp. 51–58.

    Google Scholar 

  3. Sudarev, V.P., Demidovich, E.A., Kovalev, P.I., and Novitskii, L.I., Metal Production Quality Monitoring on the Basis of the Correlation between Parameters (Generalizing Paper), Zavodskaya Laboratoriya, 1992, vol. 58, no. 5, pp. 67–74.

    Google Scholar 

  4. Nerazrushayushchii kontrol'. Rossiya, 1990-2000. Spravochnik (Nondestructive Testing. Russia, 1990-2000. Handbook), Klyuev, V.V. (Ed.), Moscow, Mashinostroenie, 2001.

    Google Scholar 

  5. Mel'gui, M.A., Magnitnyi kontrol' mekhanicheskikh svoistv stalei (Magnetic Testing of Mechanical Properties of Steels), Minsk: Nauka i Tekhnika, 1980.

    Google Scholar 

  6. Mikheev, M.N. and Gorkunov, E.S., Magnitnye metody strukturnogo analiza i nerazrushayushchego kontrolya (Magnetic Methods of Structural Analysis and Nondestructive Testing), Moscow: Nauka, 1993.

    Google Scholar 

  7. Mel'gui, M.A. and Matyuk, V.F., Testing of Mechanical Properties of Steel Sheets in a Manufacturing Flow, In: Fizicheskie svoistva metallov i problemy nerazrushayushchego kontrolya (Physical Properties of Metals and Problems of Nondestructive Testing), Minsk: Nauka i Tekhnika, 1978, pp. 57–75.

    Google Scholar 

  8. Ermolov, I.N., Aleshin, N.P., and Potapov, A.I., Nerazrushayushchii kontrol'. V 5 knigakh. Kn. 2. Akusticheskie metody kontrolya (prakt. posobie) [Nondestructive Testing. In 5 books. Book 2. Acoustic Testing Methods (Manual)], Sukhorukov, V.V. (Ed.), Moscow: Vysshaya Shkola, 1991.

    Google Scholar 

  9. Gerasimov, V.G., Pokrovskii, A.D., and Sukhorukov, V.V. Nerazrushayushchii kontrol'. V 5 knigakh.Kn. 3. Elektromagnitnyi kontrol' (prakt. posobie) [Nondestructive Testing. In 5 books. Book 3. Electromagnetic Testing (Manual)], Sukhorukov, V.V. (Ed.), Moscow: Vysshaya Shkola, 1992.

    Google Scholar 

  10. Borsutzki, M., Kroos, J., Reimche, W., and Schneider, E., Magnetische und akustische Verfahren zur Materialcharakterisierung von Stahlblechen, Stahl u. Eisen, 2000, vol. 12, pp. 115–121.

    Google Scholar 

  11. Forster, F., Die schnelle und genaue Messung der Koerzitivkraft. 2, Arch. techn. Messen, 1957, vol. 255, pp. 87–90.

    Google Scholar 

  12. Afanas'ev, Yu.V., Ferrozondovye pribory (Flux-Gate Magnetometers), Leningrad, Energoatomizdat, 1986.

    Google Scholar 

  13. Prudviblokh, I.A. and Filyushin, B.S., Coercive Force Meter, USSR Inventor's Certificate no. 5888522, Byull. Izobret., 1978, no. 2, p. 142.

  14. Lanin, A.S., Prudviblokh, I.A., and Slobodyanskii, B.G., Device for Measurements of the Coercive Force, USSR Inventor's Certificate no. 235194, Byull. Izobret., 1969, no. 5, p. 52.

  15. Antonov, V.G. and Malyarevskii, T.N., Method of Measurements of the Coercive Force, USSR Inventor's Certificate no. 842658, Byull. Izobret., 1981, no. 24, p. 178.

  16. Syke, G. Improvements in Relating to Hardness Determination, UK Patent no. 1076168, 1967.

  17. Arrot, A., Dennis, R.L., Haakana, S.N., Jones, R.G., and Warrick, R.J., Magnetically Determining Mechanical Properties of Moving Ferromagnetic Materials, USA Patent no. 3586963, 1971.

  18. Arrot, A., Dennis, R.L., Haakana, S.N., Jones, R.G., and Warrick, R.J., Magnetically Determining Mechanical Properties of Moving Ferromagnetic Materials, UK Patent no. 1249274, 1971.

  19. Arrot, A., Dennis, R.L., Haakana, S.N., Jones, R.G., and Warrick, R.J., Procede et mecanisme permettant de determiner magnetiquement les proprietes mechaniques de metaux ferromagnetiques en mouvement, France Patent no. 2042-020, 1971.

  20. Arrot, A., Dennis, R.L., Haakana, S.N., Jones, R.G., and Warrick, R.J., Patent no. 402243, Byull.Izobret., 1973, no. 41, p. 229.

  21. Mel'gui, M.A. and Sandomirskii, S.G., Method of Electromagnetic Testing of Traveling Ferromagnetic Articles, USSR Inventor's Certificate no. 1078310, Byull. Izobret., 1984, no. 9, p. 143.

  22. Yanus, R.I., Magnitnaya defektoskopiya (Nondestructive Magnetic Testing), Moscow: Gostekhizdat, 1946.

    Google Scholar 

  23. Ki, S., Takakhai, S. et al., Contactless Hardness Meter in the Continuous Annealing Line, In: Proceedings of 103rd Symposium of Japan Metallurgy Institute; Poster No. 408, published in Tetsy-to-Khagane, 1982,vol. 68, no. 5, p. 84.

    Google Scholar 

  24. Quittner, G., Method and Apparatus for Determining Hardness of Ferromagnetic Materials, UK Patent no. 1067764, 1967.

  25. Quittner, G., Spot Recording and Pickup Method and Apparatus for the Determination of Hardness of Relatively Moving Magnetic Material without Contacting the Same, USA Patent no. 3432747, 1969.

  26. Hansen, H.J., Jr., Continuous Nondestructive Magnetic Testing of Steel Strip, Journal of Metals (The Magazine of Operating Metallurgy), 1966, vol. 18, no. T-10, pp. T39-T44.

    Google Scholar 

  27. Tomilov, G.C., Method of Magnetic Testing of Body and Surface Quenching and Tempering of Steel Articles, USSR Inventor's Certificate no. 212077, Byull. Izobret., 1968, no. 10, p. 37.

  28. Tomilov, G.C., Method of Magnetic Testing of Articles, USSR Inventor's Certificate no. 288384, Byull.Izobret., 1970, no. 36, p. 146.

  29. Tomilov, G.C., Method of Continuous Magnetic Testing of the Hardness and Yield Point of Long Steel Articles, USSR Inventor's Certificate no. 278181, Byull. Izobret., 1970, no. 25, p. 123.

  30. Kalinin, Yy.S. and Simonova, E.Ya., Method of Nondestructive Testing of Metal Articles, USSR Inventor's Certificate no. 340954, Byull. Izobret., 1972, no. 18, p. 159.

  31. Halsey, H.P., Wolter, H.D., and Ceckler, W.H., Verfahren zur kontinuierlichen und berüuhrungsfreien Messung der Härte eines Stahlerzeugnissen wie Bandstahl, Auslegenschrift Num. 1648797, Bundesrepublik Deutschland, 1973.

  32. Duben, L. and Kren, J., Zarizeni pro kompensovani vlivu promenne vzduchove mezery mezi feromagnetickou sondou a povrchem zkouseneho vyrobku, ChSSR Patent no. 172507, 1976.

  33. Procede at appareil pour le controle des proprietes magnetiques des handes metalliques, France Patent no. 2099222, 1972.

  34. Lapper, M., Apparatus for the Magnetic Testing of Metal Strip, UK Patent no. 1311907, 1973.

  35. Lapper, M., Apparatus for Testing Magnetic Characteristics of a Moving Metal Strip Utilizing a Roller Containing a Fixed Nonrolatable Monitor in Contact with the Strip, USA Patent no. 3748575, 1973.

  36. Appareil pour effectruer magnetiquement des essais sur un feuiliard de metal en mouvement, France Patent no. 2310566, 1976.

  37. Procede de detection des proprietes magnetiques d'une bande metallique et dispositif pour sa mise enoeuvre, France Patent no. 2141854, 1973.

  38. Melzer, K.H., Knoche, H., and Sodeik, M., Kontinuierliche Prufung der Werkstoeigenschaften kaltgewalzter dunner Stahlbader, Komission der Europaischen Gemeinschaften. Technische Forschung. Stahl.Forschungsvertrag, no. 7210, GA/III, 1982..

  39. Brian, G.M., Apparatus for Non-Destructive Testing of Elongated Objects, UK Patent Pending, no. 2012-966, 1972.

  40. Method of Continuous Measurement of the Residual Magnetization, Japan Patent Pending, no. 53-29109, 1974.

  41. Tomilov, G.C., Magnetic Testing of the Structure and Hardness of Steel Articles on the Basis of Measurements of the Local Field of the Residual Magnetization, Defektoskopiya, 1966, no. 4, pp. 70–78.

    Google Scholar 

  42. Measurement of Residual Magnetization, UK Patent no. 1512690, 1978.

  43. Matyuk, V.F., Pulse Magnetic Testing of the Strength Characteristics of Ferromagnetic Articles, VesciNAN Belarusi, Ser. Fiz.-Techn. Navuk, 1998, no. 4, pp. 114–118.

  44. Mel'gui, M.A. and Matyuk, V.F., Investigation of the Possibility of Elimination of the Effect of the Gap between a Transducer and a Tested Material in the Pulse Magnetic Testing Method, Defektoskopiya, 1981, no. 6, pp. 74–79.

  45. Mel'gui, M.A. and Matyuk, V.F., Extension of the Region of Elimination of the Effect of the Gap between a Transducer and a Tested Material in the Pulse Magnetic Testing Method, Defektoskopiya, 1982, no. 11, pp. 46–49.

  46. Matyuk, V.F., Upgrading of the Characteristics of Instruments of Pulse Magnetic Testing of Traveling Sheet Rolled Products, Defektoskopiya, 1989, no. 9, pp. 52–58.

  47. Matyuk, V.F., Features on the Inuence of the Amplitude and the Number of Pulses of the Magnetic Field on the Gradient of the Normal Component of the Residual Magnetization Field Strength in Local Magnetization of Thick Articles, Defektoskopiya, 1996, no. 3, pp. 18–24.

  48. Matyuk, V.F., Effect of the Velocity of Traveling of a Sheet on the Three-Dimensional Distribution of the Normal Component of the Residual Magnetization Field Strength in Local Two-Sides Pulse Magnetization, Defektoskopiya, 1996, no. 3, pp. 25–29.

  49. Matyuk, V.F., Designing Principles of Means for Automated Nondestructive Testing of Sheet Steel in Motion by Pulse Magnetic Method, In: Proceeding of the 14th World Conference on NDT (14th WCNDT), vol. 3, New Dehli, 1996, pp. 1573–1576.

    Google Scholar 

  50. Mel'gui, M.A., Matyuk, V.F., and Vostrikov, A.A., Device for Electromagnetic Testing of Mechanical Properties of Traveling Ferromagnetic Materials in the Form of Long Rods, Bands, and Proled Rolled Products, USSR Inventor's Certificate no. 587776, Byull. Izobret., 1989, no. 30, p. 297.

  51. Mel'gui, M.A. and Matyuk, V.F., Method of Electromagnetic Testing of Physico-Mechanical Parameters of a Traveling Ferromagnetic Material, USSR Inventor's Certificate no. 974242, Byull. Izobret., 1982, no. 42, p. 202.

  52. Matyuk, V.F., Method of Electromagnetic Testing of Physico-Mechanical Parameters of a Traveling Ferromagnetic Material, USSR Inventor's Certificate no. 1527567, Byull. Izobret., 1989, no. 45, p. 212.

  53. Matyuk, V.F., Pulse Magnetic Testing of Strength of Steel Rolled Products Moving in Technological Rolling Practice, In: Proceeding of the Institute of Applied Physics of Academy of Sciences of Belarus, Minsk, 1994, pp. 43–63.

  54. Mel'gui, M.A. and Matyuk, V.F., Pulse Magnetic Flux Detector IMPOK-1, Defektoskopiya, 1982, no. 9, pp. 62–66.

  55. Matyuk, V.F. and Tsukerman, V.L., Pulse Magnetic Flux Detector IMPOK-1A, Defektoskopiya, 1992, no. 4, pp. 38–43.

  56. Matyuk, V.F. and Osipov, A.A., Pulse Magnetic Method of Testing Individually Traveling Sheets in Technological Production Flow, Defektoskopiya, 1995, no. 6, pp. 56–62.

  57. Mel'gui, M.A., Matyuk, V.F., and Tsukerman, V.L., IMPOK-2 Apparatus for Testing the Mechanical Properties of Steel Sheet Rolled Products Traveling in a Production Flow, Tekhnicheskaya Diagnostikai Nerazrushayushchii Kontrol', 1994, no. 2, pp. 62–66.

  58. Matyuk, V.F. and Tsukerman, V.L., Pulse Magnetic Flux Detector IMPOK-3, In: “Nauchnoe i analiticheskoe priborostroenie” (Abstracts of Scientific and Technical Conference “Scientific and Analytic Instrument-Making”), Minsk, pp. 110–111.

  59. Matyuk, V.F., Mel'gui, M.A., Novikov, A.P., and Osipov, A.A. Device for Testing the Mechanical Properties of Steel Sheet Rolled Products, USSR Inventor's Certificate no. 1810856, Byull. Izobret., 1993, no. 15, p. 131.

  60. Mel'gui, M.A., Matyuk, V.F., and Tsukerman, V.L., IMPOK-2 Apparatus for Testing the Mechanical Properties of Steel Sheet Rolled Products Traveling in a Production Flow, In: Naucho-technicheskiedostizheniya. Mezhotraslevoi nauchno-tekhn. sb. (Scientific and Technical Achievements. Inter-Branch Scientific and Technical Articles), Moscow: VIMI, 1993, no. 2, pp. 9–12.

    Google Scholar 

  61. Tsukerman, V.L., Matyuk, V.F., and Linnik, I.I., Apparatus for Pulse Magnetization of Ferromagnetic Materials, USSR Inventor's Certificate no. 1559323, Byull. Izobret., 1990, no. 15, p. 225.

  62. Mel'gui, M.A. and Matyuk, V.F., Method of Electromagnetic Testing the Physico-Mechanical Parameters of a Traveling Ferromagnetic Material, USSR Inventor's Certificate no. 1109625, Byull. Izobret., 1984, no. 31, p. 108.

  63. Mel'gui, M.A., Matyuk, V.F., and Piunov, V.D., Measurement Assurance of Devices for Pulse Magnetic Testing of Ferromagnetic Materials, Vesci NAN Belarusi, Ser. Fiz.-Techn. Navuk, 1987, no. 2, pp. 107–112.

  64. Mel'gui, M.A., Matyuk, V.F., and Piunov, V.D., Device for Graduation and Calibration of Means for Magnetic Testing of Ferromagnetic Materials, USSR Inventor's Certificate no. 1255910, Byull. Izobret., 1986, no. 3, p. 169

  65. Melgui, M.A., Matjuk, V.F., and Piunov, V.D., Despositiffpor l'etallonage et la verification des moyens de controle magnetique de produits ferromagnetiques, France Patent no. 2564201, 1985.

  66. Melgui, M.A., Matjuk, V.F., and Piunov, V.D., Eich-und Prufeinrichtung fur Mittel zur magnetischen Kontrolle ferromagnetischer Ergzeugnisse, BRD Patent no. 3418013, 1985.

  67. Matyuk, V.F., Piunov, V.D., and Tsukerman, V.L., Device for Calibration of Magnetic Testing Instruments, USSR Inventor's Certificate no. 1546897, Byull. Izobret., 1990, no. 8, p. 213.

  68. Osipov, A.A., Matyuk, V,F., and Piunov, V.D., Device for Calibration of Magnetic Testing Instruments, USSR Inventor's Certificate no. 1721501, Byull. Izobret., 1992, no. 11, p. 151.

  69. Matyuk, V.F. and Piunov, V.D., Upgrading of Metrological Characteristics of Two-Zone Gages of the Magnetic Field Gradient for Certification of Magnetic Testing Instruments, Defektoskopiya, 1995, no. 5, pp. 88–95.

  70. Matyuk, V.F., Piunov, V,D., and Osipov, A.A., Device for Calibration of Magnetic Testing Instruments, USSR Inventor's Certificate no. 1691725, Byull. Izobret., 1991, no. 42, p. 179.

  71. Mel'gui, M.A., Matyuk, V.F., and Leonov, I.G., Method of Graduation and Calibration of Pulse Magnetic Testing Instruments, USSR Inventor's Certificate no. 1029070, Byull. Izobret., 1985, no. 46, p. 277.

  72. Matyuk, V.F. and Tsukerman, V.L., Method of Graduation and Calibration of Pulse Magnetic Testing Instruments, USSR Inventor's Certificate no. 1778672, Byull. Izobret., 1992, no. 44, p. 144.

  73. Matyuk, V.F. and Tsukerman, V.L., Imitator of the Magnetic Field Gradient for Calibration of Instruments for Magnetic Testing of Sheet Ferromagnetic Materials, USSR Inventor's Certificate no. 1824601, Byull. Izobret., 1993, no. 24, p. 87.

  74. Tsukerman, V.L., Matyuk, V.F., and Novikov, A.P., Imitator for Measurement Assurance of Pulse Magnetic Testing Instruments, Defektoskopiya, 1992, no. 10, pp. 60–65.

  75. Matyuk, V.F. and Tsukerman, V.L., Simulation of the Effect of a Traveling Locally Magnetized Section on the Magneto-Sensitive Elements of a Transducer of a Calibrated Testing Instrument, In: “Metrologiya-97”, (International Scientific-Practical Conference “Metrology-97”), Minsk, 1997, pp. 207–209.

  76. Bykov, I.N., Vovk, V.I., Zenov, M.C., Droznin, A.E., Danilov, L.A., Titenko, V.V., Pimenov, V.A., Breslavskii, Yu.V., Sheftel', V.M., Ermolenko, A.A., and Lifshits, L.A., Device for Automatic Testing the Quality of Traveling Rolled Product, USSR Inventor's Certificate no. 1753393, Byull. Izobret., 1992, no. 29, pp. 174–175.

  77. Akimov, A.A., Kagan, M.B., Kazyukevich, I.L., and Osipov, A.D., In: Impulsnyi magnitnyi metodnerazrushayushchego kontrolya. Sostoyanie i perspektivy. (Sbornik trudov konferentsii, posvyashchennoi 30-letiyu laboratorii magnitnykh metodov kontrolya, 27 fevralya-3 marta 2001) [Pulse Magnetic Nondestructive Testing Method. State and Perspectives. (Proceedings of the Conference Devoted to 30th-Year Anniversary of the Laboratory of Magnetic Testing Methods)], Minsk: IPF NAN RB, 2001, pp. 130–137.

    Google Scholar 

  78. Mel'gui, M.A., Matyuk, V.F., Vostrikov, A.A., Kirillova, G.A., and Baturina, S.K., Testing of Mechanical Properties of Cold Rolled Automobile-Body Sheet Using an IMPOK-1 Apparatus, Stal', 1990, no. 4, pp. 78–80.

  79. Mel'gui, M.A., Matyuk, V.F., Vostrikov, A.A., Kirillova, G.A., and Baturina, S.K., Testing of Mechanical Properties and Certification of Sheet Rolled Products in a Production Flow, In: “Uluchshenie kachestva metalla i ego ekonomiya za schet vnedreniya nerazrushayushchikhmetodov kontrolya” (Abstracts of Scientific and Technical Conference “Upgrading of the Quality of Metal and its Economy due to Application of Nondestructive Testing Methods”), Chelyabinsk, 1985, pp. 17–18.

  80. Mel'gui, M.A., Matyuk, V.F., Shidlovskaya, E.A., Vostrikov, A.A., Kirillova, G.A., and Baturina, S.K., Investigation of the Possibility of Nondestructive Testing of Mechanical Properties and Microstructure of 18YuA Steel, Dep. no. 3041-V89, Moscow, VINITI, 1989.

  81. Matyuk, V.F., Hartmann, H., and Reichelt, H., Automatic Testing of Mechanical Properties of Rolled Goods in the Hot Zinc Galvanizing Line, In: 7th European Conference on Non-Destructive Testing. Proceedings, Copenhagen, 1998, vol. 2, pp. 2252–2259.

    Google Scholar 

  82. Taranenko, P.P., Fishev, V.N., Velikii, N.I., Dovgaleva, l.A., Zaitsev, V.M., Antonov, G.I., Norka, S.P., and Sidorenko, A.I., Organizing and Functioning Program-TechnicalMeans of Nondestructive Testing of Mechanical Properties of Metal Products in a Technological Flow, Metall i Lit'e Ukrainy, 1997, no. 2-4, pp. 39–41.

  83. Pyatunin, G.A. and Zinchenko, S.A., Experience of Adoption of the Pulse Magnetic Method for TestingCold Rolled Sheet, In: Impulsnyi magnitnyi metod nerazrushayushchego kontrolya. Sostoyanie i perspektivy.(Sbornik trudov konferentsii, posvyashchennoi 30-letiyu laboratorii magnitnykh metodov kontrolya, 27 fevralya-3 marta 2001) (Pulse Magnetic Nondestructive Testing Method. State and Perspectives. (Proceedings of the Conference Devoted to 30th-Year Anniversary of the Laboratory of Magnetic Testing Methods), Minsk: IPF NAN RB, 2001, pp. 103–105.

    Google Scholar 

  84. Dolgova, L.I., Morozov, A.A., Kornilov, V.L., Belyakova, V.I., Vostrikov, A.A., and Ivanova, L.S., Development of Testing Methods and Microstructure of Finished Products of Rolling-Mill Shops, Impulsnyimagnitnyi metod nerazrushayushchego kontrolya. Sostoyanie i perspektivy. (Sbornik trudov konferentsii, posvyashchennoi 30-letiyu laboratorii magnitnykh metodov kontrolya, 27 fevralya-3 marta 2001) [Pulse Magnetic Nondestructive Testing Method. State and Perspectives. (Proceedings of the Conference Devoted to 30th-Year Anniversary of the Laboratory of Magnetic Testing Methods)], Minsk: IPF NAN RB, 2001, pp. 115–119.

    Google Scholar 

  85. Fishev, V.N., Dovgaleva, L.A., and Sidorenko, A.I., Magnetic Nondestructive Testing of Mechanical Properties of Steel Sheet Rolled Products, Impulsnyi magnitnyi metod nerazrushayushchego kontrolya. Sostoyanie i perspektivy. (Sbornik trudov konferentsii, posvyashchennoi 30-letiyu laboratorii magnitnykhmetodov kontrolya, 27 fevralya-3 marta 2001) [Pulse Magnetic Nondestructive Testing Method. State and Perspectives. (Proceedings of the Conference Devoted to 30th-Year Anniversary of the Laboratory of Magnetic Testing Methods)], Minsk: IPF NAN RB, 2001, pp. 120–123.

    Google Scholar 

  86. Taranenko, P.P., Zaitsev, V.M., Fishev, V.N., Dovgaleva, L.A., Tyrsunov, D.A., Velikii, N.I., and Priimenko, V.M., Program and Technical Means of Nondestructive Testing Systems of Mechanical Properties of Sheet Rolled Products in Lines of Breaking Units, Impulsnyi magnitnyi metod nerazrushayushchego kontrolya. Sostoyanie i perspektivy. (Sbornik trudov konferentsii, posvyashchennoi 30-letiyu laboratorii magnitnykh metodov kontrolya, 27 fevralya-3 marta 2001) [Pulse Magnetic Nondestructive Testing Method. State and Perspectives. (Proceedings of the Conference Devoted to 30th-Year Anniversary of the Laboratory of Magnetic Testing Methods)], Minsk: IPF NAN RB, 2001, pp. 124–129.

    Google Scholar 

  87. Dolgova, L.I., Baturina, S.K., and Yatsenko, N.L., Nondestructive Testing of Mechanical Properties of a Band of 18YuA Steel, Stal', 1993, no. 10, pp. 51–53.

    Google Scholar 

  88. Belash, A.V., Krutikova, l.A., and Shitova, G.M., Experience of Using IMPOK Apparatuses in Continuous Annealing and Hot Zinc-Plating Lines, Impulsnyi magnitnyi metod nerazrushayushchego kontrolya. Sostoyanie i perspektivy. (Sbornik trudov konferentsii, posvyashchennoi 30-letiyu laboratorii magnitnykh metodov kontrolya, 27 fevralya-3 marta 2001) [Pulse Magnetic Nondestructive Testing Method. State and Perspectives. (Proceedings of the Conference Devoted to 30th-Year Anniversary of the Laboratory of Magnetic Testing Methods)], Minsk: IPF NAN RB, 2001, pp. 138–152.

    Google Scholar 

  89. Hartmann, H., Reichelt, H., Matyuk, V.F., and Kratirov, V.B., Experience of Using an IMPOK-1B Apparatus for Testing Mechanical Properties in a Zinc-Plating Line, Impulsnyi magnitnyi metod nerazrushayushchegokontrolya. Sostoyanie i perspektivy. (Sbornik trudov konferentsii, posvyashchennoi 30-letiyu laboratorii magnitnykh metodov kontrolya, 27 fevralya-3 marta 2001) [Pulse Magnetic Nondestructive Testing Method. State and Perspectives. (Proceedings of the Conference Devoted to 30thYear Anniversary of the Laboratory of Magnetic Testing Methods)], Minsk: IPF NAN RB, 2001, pp. 153–159.

    Google Scholar 

  90. Osborn, M.L. and Kritzer, L.D., USSR Inventor's Certificate no. 847947, Byull. Izobret., 1981, no. 26, p. 304.

  91. Kahlen, N., Determining the Magnetic Properties of Elongate 6Magnetizable Material, UK Patent no. 1249274, 1971.

  92. Scott, R., Device for Detecting Variations in Magnetic Properties of FerromagneticMaterial, USA Patent no. 3444458, 1969.

  93. Klimov, K.M. and Kisel'gof, E.Sh., Electromagnetic Testing of the Hardness of Tin Plate in a Stream, In: Elektromagnitnye metody kontrolya (Electromagnetic Testing Methods), Moscow, MDNTP, 1969, pp. 169–172.

  94. Kisel'gof, E.Sh. and Klimov, K.M., Design of the Electromagnetic Contactless Method of Testing the Hardness of Cold-Rolled Steel Sheet in a Technological Stream, Defektoskopiya, 1971, no. 3, pp. 5–10.

  95. Method of Measuring the Hardness of Thin Steel Plates Using a magnetic Field (Toe Kokhan K.K. Firm), Japan Patent Pending, no. 50-21869, 1975.

  96. Sekino, M., Sasa, K. et al., Method of Continuous Measurement of the Hardness of Magnetic Materials, Japan Patent no. 50-26951, 1975.

  97. Gorkunov, E.S. and Dragoshanskii, Yu.N., Barkhausen Effect and its Use in Testing the Structure of Ferromagnetic Materials (Review 1), Defektoskopiya, 1999, no. 6, pp. 3–23.

  98. Lomaev, G.V., Dolbenshchikov, A.K., and Merzlyakov, Yu.M., Device for Testing Traveling Ferromagnetic Materials in the Form of Long Rods, Wires, and Bands, USSR Inventor's Certificate no. 451970, Byull. Izobret., 1974, no. 44, p. 102.

  99. Lomaev, G.V. and Len'kov, S.V., Device for Testing Traveling Ferromagnetic Materials in the Form of Long Rods, Wires, and Bands, USSR Inventor's Certificate no. 573783, Byull. Izobret., 1977, no. 35, p. 155.

  100. Lomaev, G.V. and Len'kov, S.V., Method of Testing the Coercive Force of Traveling Ferromagnetic Materials, In: Elektromagnitnye metody kontrolya kachestva izdelii: Tezisy dokl. konf. (Electromagnetic Methods of Product Quality Testing. Abstracts of the Conference), Kuibyshev, 1978, pp. 155–158.

  101. Len'kov, S.V., Lomaev, G.V., Merzlyakov, Yu.M., and Perepelov, S.P., Device for Testing the Coercive Force of Traveling Ferromagnetic Materials, In: Elektromagnitnye metody kontrolya kachestva izdelii: Tezisy dokl. konf. (Electromagnetic Methods of Product Quality Testing. Abstracts of the Conference), Kuibyshev, 1978, pp. 153–155.

  102. Kopineck, H.J., Otten, H., and Dobmann, G., Zerstörungsfreie Ermittlung von Werkstoekennwertenspeziell an gewalzten Blechen. Komission der Europaischen Gemeinschaften. Technische Forschung.Stahl. Foeschungsvertrag no. 7210. GA/117, 1988.

  103. Borsutzki, M., Thoma, Ch., Bleck, W., and Theiner, W., On-Line-Bestimmung von Werksto_eigenschaftenan kaltgewalztem Feinbleich. Stahl u. Eisen, 13, 1993, vol. 10, pp. 93–99.

    Google Scholar 

  104. Borsutzki, M., Thoma, Ch., and Theiner, W., On-Line-Messung von Werksto_eigenschaften an kaltgewalztem Feinbleich im Rahmen eines Pilotvorhabens. Seminar “Zerstörungsfreie Materialcharakterisierung”, Jena, 14 und 15 Oktober, 1996, pp. 159–167.

  105. Dobmann, G., Scheider, E., and Borsutzki, M., On-line Qualitätsüberwachung der Streckgrenze und derTiefzienfäikeit von ferritischen Feinblechqualitäten. MEFORM 97. Freiburger Umformtechnisches Seminar “On-line Qualitäatsüberwachung und Kontrolle bei der Imformung”, 19 bis 21 Februar 1997, pp. 1–12.

  106. Borsutzki, M., Prozeintegrierte Ermittlung der Streckgrenze und der Tiefziehkenngroen r m und Δr an kalrgewalztem, feuerverzinktem Feindleich. Dissertation zur Erlangung des grads Doktor der Ingenieurwissenschaften, Saarbrucken, 1997.

  107. Borsutzki, M. and Theiner W.A., Prozeintegrierte Ermittlung der Streckgrenze und der Tiefziehfahigkeitan kaltgewalztem, feuerverzinktem feinblech. Materialwoche, Munich, 12 bis 15 Oktober, 1998, pp. 371–376.

  108. Borsutzki, M., Kroos, J., Reimche, W., and Scheider, E., Magnetishe und akustische Verfahren zur Materialcharakterisierung von Stahlblechen. Stahl u. Eisen, 120(2000), vol. 12, pp. 115–121.

    Google Scholar 

  109. Arakagava, L., Otiasi, T., and Arakagava, U., Method and Device for Continuous Measurements of the Hardness of Steel Band, Japan Patent no. 46-12427, 1971.

  110. Lutz, B, Zerstörungsfreie Prüfung def Meterialeigenschaften erlaubt kontrollierte blechbearbeitung. Bleich-Rohre-Profile, 1993, Bd. 40, vol. 2, pp. 172–176.

    Google Scholar 

  111. Lutz, B., Engel, U., and Schwind, M., Is Magnetoinductive Testing a Satisfactory Substitute for Destructive Tensile Test of Steel Sheet and Plate? In: 6th European Conference on Non-Destructive Testing, Nice, 1994, pp. 1127–1131.

  112. Löbe F., Moser, E., and Schütz, Th., Zerstörungsfreie Prüfung mechanischer Kennwerte von Flachprodukten, Beilage zur DGZfP-Zeitung, no. 27, Juni 1991, Bericht no. 293.

  113. Lutz, B., Shaer, R.D., Haider, H., and Moser, E.L., Kosten-und zeitsparende Bleichprufung (Magnetinduktives Prüfverfahren für Festigkeit and Härte), Berichte des Institutes Dr. Forster Material-prüfung, 1992, Bd. 34, Hf. 4, pp. 101–104.

  114. Schwind, M. and Engel, U., Prozeβsicherung durch magnetinduktive Überwachung mechanischer Blecheigenschaften. Blech-Rohre-Prole 1993, Bd.40, Hf. 2, pp. 686–693.

  115. Schwind, M., Engel, U., and Geiger, M. Feinblechprüfung mit magnetinduktiven Prüfverfahren. 12. Vertrags-und Diskussionstangeng WERKSTOFF-PRÜFUNG, 1994, Bad Nauheim, pp. 111–116.

  116. Reimche, W., Feiste, K.L., Reichert, C., and Stegemann, D. Zerstörungsfreie elektromagnitische Bestimmung mechanisch-technologischer Werkstoeigenschaften. Seminar Zerstörungsfreie Materialcharakterisierung, Jena, 14-15 Oktober, 1996, pp. 193–202.

    Google Scholar 

  117. Reimche, W., Heutling, B., Krys, A., Feiste, K.L., Stegemann, D., Kroos, J., Stolzenberg, M., Westkämper, G., and Angerer, R. Harmonischen Meβsystem zur zerstörungsfreien Bestimmung von Feinblecheigenschaften. Werkstoprüfung, Bad Nauheim, 1998, pp. 229–238.

  118. Heutling, B., Krys, A., Feiste, K.L., Reimche, W., Stegemann, D., Kroos, J., Stolzenberg, M., Westkämper, G., and Angerer, R., Zerstörungsfreie Bestimmung anisotroper feinblechgenschaften mit einrm Harmonischen-Meβsystem. Deutsche Gesellshaft für zerstörungsfreie Prüfung. Jahrestangung 1999. Celle, 10-12 May 1999, pp. 133–140.

  119. Stegemann, D., Reimche, W., Heutling, B., Krys, A., Kroos, J., Stolzenberg, M., Westkämper, G., and Angerer., R., Development of a Prototype Facility for Non-Destructive Determination of Direction Dependent Mechanical-Technological Sheet Properties. Steel Research, Report EUR, 19387 EN, pp. 120–128.

  120. Stegemann, D., Reimche, W., Heutling, B., Krys, A., Kroos, J., Stolzenberg, M., Westkämper, G., and Angerer. R., Characterization of Steel Grades by Magnetoinductive Method. In: 15th World Conferenceon Non-Destructive Testing, Rome (Italy), 15-21 October, 2000, p. 238.

  121. Kroos, J., Stolzenberg, M., Westkämper, G., Angerer.R., Reimche, W., Feiste, K.L., Heutling, B., and Krys, A., Entwicklung einer Prototypanlege zur zerstörungsfreien, magnetinduktiven Bestimmung richtungsabhängiger, machanisch/technologischer Feinblecheigenschaften. Europäische Komission. Forschungsvertrag no. 7210-GB/125, 126 (1.10.1996-30.6.2000), Abschlussbericht.

  122. Kal'chenko, E.M. and Satsukevich, P.N., Device for Nondestructive Testing of Metal Products, USSR Inventor's Certificate no. 1188634, Byull. Izobret., 1985, no. 40, p. 172.

  123. Anisimov, S.D., Svetashev, S.S., and Shatskii, N.Kh., Device for Electromagnetic Testing of Physical Properties of Metal Products, USSR Inventor's Certificate no.815609, Byull. Izobret., 1981, no. 11, p. 187.

  124. Kopineck, H-J., Löffel, R., and Otten, H., On-line-Texturmessung zur r-Wert-Bestimmung an kaltgewalzten Stahlbändern. Tagung Werksroffprüfung, 1991 Bad Nauheim, 5 und 6 Dezember, pp. 493–505.

  125. Altpeter, I., Dobmann, G., Meyendorf, N., and Schneider, E., Erfassung von Eigenspannungen und Texturin Walzprodukten mit zerstörungsfreien Prufverfahren. VCI Berichte, 1994, no. 1142, pp. 115–129.

  126. Zheleznov, Yu.D., Grigoryan, G.G., Zhuravskii, A.G., Krepakova, V.F., and Gurevich, V.E., Measurement of the Normal Anisotropy Coefficient Using a Nondestructive Method, Izv. Vuzov. Chernaya Metallurgiya, 1978, no. 9, pp. 70–73.

  127. Cherepanov, A.V. and Bykov, L.V., Device for Testing the Normal Anisotropy Coefficient, In: Tonkolistovayaprokatka (Thin-Sheet Rolling), Voronezhskii Politekhnicheskii Institut, 1983, pp. 125–128.

  128. Zheleznov, Yu.D., Zhuravskii, A.G., Cherepanov, A.V., and Bulatnokov, E.I., Nondestructive Method of Testing the Punching-Ability of Thin-Sheet Steel, in: Elektromagnitnye metody kontrolya kachestva materialov i izdelii. Tezisy dokl. IV Vsesoyuznoi mezhvuzovskoi konf. Ch. II. Magnitnye metody (Electromagnetic Methods of Product and Material Quality Testing. Abstracts of the IVth All-Union Inter-Institute Conference), Omsk, 1983, pp. 19–20.

  129. Kuznetsova, V.F., Tsukanov, Yu.A., and Cherepanov, A.V., NondestructiveMagnetic Testing of the Process of Temper Rolling of Thin-Sheet Cold-Rolled Steel, In: Sovremennye metody nerazrushayushchego kontrolya i ikh metrologicheskoe obespechenie. Tezisy dokl. nauchno-technicheskoi konf. (Modern Methods of Nondestructive Testing and their Measurement Assurance. Abstracts of Scientific and Technical Conference), Chelyabinsk, 1987, pp. 50–51.

  130. Zhuravskii, A.G., Cherepanov, A.V., and Tsukanov, Yu.A., Testing and Graduating of the Process of Temper Rolling of Thin-Sheet Steel Using a Nondestructive Magnetic Method, In: “Nerazrushayushchie zicheskie metody i sredstva kontrolya”, Ch. 2, Sektsiya B, Elektromagnitnye metody (XIth All-Union Scientific and Technical Conference “Nondestructive Physical Methods and Means of Testing”. Pt. 2, Section B. Electromagnetic Methods), Moscow, 1987, p. 137.

  131. Zheleznov, Yu.D., Zhuravskii, A.G., Slauta, S.P., Bykova, L.V., Golyaev, V.I., Gridnev, A.T., Kachishin, V.N., and Mindlin, B.I., Method of Nondestructive Testing of Magnetic Characteristics of Ferromagnetic Materials, USSR Inventor's Certificate no. 1456860, Byull. Izobret., 1989, no. 5.

  132. Zhuravskii, A.G., Slauta, S.P., and Zubilin, F.A., On Attenuation of the Effect of Air Gap Oscillations During Nondestructive Testing of Anisotropic Electrical Steel, Defektoskopiya, 1992, no. 11, pp. 81–86.

Download references

Author information

Authors and Affiliations

  1. Institute of Applied Physics, National Academy of Sciences of Belarus, Minsk, Belarus

    V. F. Matyuk & S. A. Goncharenko

  2. Soil Quality Research Center, Brandenburg, Germany

    H. Hartmann & H. Reichelt

Authors
  1. V. F. Matyuk
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. A. Goncharenko
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. H. Hartmann
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. H. Reichelt
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Matyuk, V.F., Goncharenko, S.A., Hartmann, H. et al. Modern State of Nondestructive Testing of Mechanical Properties and Stamping Ability of Steel Sheets in a Manufacturing Technological Flow. Russian Journal of Nondestructive Testing 39, 347–380 (2003). https://doi.org/10.1023/B:RUNT.0000011264.99280.de

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/B:RUNT.0000011264.99280.de

Keywords

Search

Navigation