Abstract
The effect of various technological procedures for reconditioning with the use of ion-plasma-deposited titanium nitride coatings on the resistance of steel compressor blades to pitting corrosion was studied.
Similar content being viewed by others
REFERENCES
Tsareva, I.N., Trenin, V.F., Sorokina, S.A., and Pan-chenko, A.V., Fizicheskie tekhnologii v mashinovede-nii: Sbornik nauchnykh trudov (Physical Technologies in Engineering Science: Coll. of Sci. Works), Nizhni Novgorod, 2001, issue 2, pp. 92–98.
Sokol, I.Ya., Struktura i korroziya metallov i splavov (Structure and Corrosion of Metals and Alloys), Moscow: Metallurgiya, 1989.
GOST (State Standard) 9.912-89. Corrosion-Resistant Steels and Alloys, Moscow: Izd. Standartov, 1990.
Tarasenko, Yu.P., Tsareva, I.N., and Trenin, V.F., Gazoturbinn. Tekhnol., 2001, July-August, 2001, pp. 40–42.
Tarasenko, Yu.P., Tsareva, I.N., Trenin, V.F., and Krivina, L.A., Materialovedenie i vysokotemperaturnye tekhnologii: Sbornik nauchnykh trudov (Materials Science and High-Temperature Techniques: Coll. Sci. Works), Nizhni Novgorod, 2000, issue 2, pp. 159–162.
Tsareva, I.N., Romanov, I.G., and Tarasenko, Yu.P., Izv. Akad. Nauk, Ser. Fiz., 2002, vol. 66, no. 8, pp. 1223–1225.
Mil'man, Yu.V., Golanov, B.A., and Chugunova, S.I., Kharakteristika plastichnosti, poluchaemaya pri iz-merenii tverdosti (Plasticity Coefficient Obtained in Hardness Measurements), Kiev: Naukova Dumka, 1992.
Tomashov, N.D. and Chernova, G.P., Passivnost' i zashchita ot korrozii(Passivity and Corrosion Protection), Moscow: Nauka, 1965.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Myshlyaev, D.A., Tsareva, I.N., Fedorova, E.A. et al. Improvement of the Corrosion Resistance of Compressor Blades with Ion-Plasma-Deposited Titanium Nitride Coatings. Russian Journal of Applied Chemistry 77, 930–933 (2004). https://doi.org/10.1023/B:RJAC.0000044118.44271.46
Issue Date:
DOI: https://doi.org/10.1023/B:RJAC.0000044118.44271.46