Abstract
The integration of molecular biology tools in environmental engineering is a challenge. We discuss our views on the following four critical issues: (i) faculty career development, (ii) tool standardization, (iii) teaching, and (iv) the application of molecular biology tools in practice. For (i), we suggest that administrators and faculty need to understand the special challenges inherent to research and teaching within this highly interdisciplinary area. Furthermore, we suggest preparing two white papers aimed at educating administrators in universities and agencies. For (ii), we conclude that, because molecular biology tools are still in a state of rapid development, proposing standards at this time is premature. In the future, standards for widely applied tools should be in an on-line, peer-reviewed format. Concerning (iii), we believe that molecular biology should be taught only to the degree needed to achieve program goals. For example, environmental engineering practitioners only need to know the vocabulary and basic concepts of molecular biology tools, not be experts at doing them hands on. To help engineering students gain the right level and type of information, learning modules should be developed for them. Finally, although engineering successes applying molecular biology tools are available (iv), the biggest value will come when the tools are fully integrated with practice. Therefore, we encourage the creation of a demonstration project to document the value of applying molecular biology tools in environmental engineering.
Similar content being viewed by others
References
Amann R, Lemmer H Wagner M (1998) Monitoring the community structure of wastewater treatment plants∶ A comparison of old and new techniques. FEMS Microbiol. Ecol. 25∶ 205–215
Clesceri L, Eaton AD & Greenberg AE (Eds) (1998) Standard Methods for the Examination of Water and Wastewater, 20th ed. APHA, AWWA, WEF, Washington, DC
Curtis T, Head I & Graham DW (2003) Ecology for biology∶ Are we standing on the threshold of a renaissance in designing biological systems? Environ. Sci. Technol. 37∶ 65A–70A
Dabert P, Delegenes JP, Moletta R & Godon JJ (2002) Contribution of molecular microbiology to the study in water pollution removal of microbial community dynamics. Re/Views Environ. Sci. Bio/Technol. 1∶ 39–49
Grady CPL & Filipe CDM (2000) Ecological engineering of bioreactors for wastewater treatment. Water Air Soil Poll. 123∶ 117–132
Jenkins D, Richard MG & Daigger GT (1993) Manual on the Causes and Control of Activated Sludge Bulking and Foaming, 2nd ed. Lewis Publishers, Chelsea
Keller J, Yuan Z & Blackall LL (2002) Integrating process engineering and microbiology tools to advance activated sludge wastewater treatment research and development. Re/Views in Environ. Sci. Bio/Technol. 1∶ 83–97
Logan B, O'Melia C & Ritmann B (Eds) (1998a) Research Frontiers in Environmental Engineering∶ A Report of a Workshop Sponsored by the National Science Foundation and the Association of Environmental Engineering Professors. Champaign, IL, Association of Environmental Engineering Professors
Logan B & Ritmann B (1998b) Finding solutions for tough environmental problems. Environ. Sci. Technol. 32∶ 502A–507A
Oerther DB & de los Reyes III F (2001) Molecular methods in biological systems. Water Environ. Res. 73(5)∶ CD-ROM, 23 pp
Oerther DB & de los Reyes III F (2002) Molecular methods in biological systems. Water Environ. Res. 74(4)∶ CD-ROM, 23 pp
Oerther DB, Jeyanayagam S & Husband J (2002) FISHing for fingerprints in BNR systems! Water Environ. Technol. 14∶ 22–27
Oerther DB (2002) Introducing molecular biology to environmental engineers through development of a new course. CEE∶ Chemical Engineering Education 36∶ 258–263
Rittmann BE (1998) Molecular understanding. Water Environ. Res. 70∶ 1107
Rittmann BE (2002) Molecular Biology and special issues. Water Environ. Res. 74∶ 419
Seviour RJ & Blackall LL (1999) The Microbiology of Activated Sludge. London, Kluwer Academic Publishers
Stensel HD (2001) Probing the black boxes. Water Environ. Res. 73∶ 259
Wagner M, Loy A, Nogueira R, Purkhold U, Lee N & Daims H (2002) Microbial community composition and function in wastewater treatment plants. Antonie van Leeuwenhoek 81∶ 665–680
Wagner M & Loy A (2002) Bacterial community composition and function in sewage treatment systems. Curr. Opin. Biotechnol. 13∶ 218–227
Widada J, Nojiri H & Omari T (2002) Recent developments in molecular techniques for identification and monitoring of xenobiotic-degrading bacteria and their catabolic genes in bioremediation. Appl. Microbiol. Biotechnol. 60∶ 45–59
Wilderer PA, Bungartz H, Lemmer H, Wagner M, Keller J & Wuretz S (2002) Modern scientific methods and their potential in wastewater science and technology. Water Res. 36∶ 370–393
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Oerther, D.B., Love, N.G. The value of applying molecular biology tools in environmental engineering: Academic and industry perspective in the USA. Re/Views in Environmental Science and Bio/Technology 2, 1–8 (2003). https://doi.org/10.1023/B:RESB.0000022932.74077.5e
Issue Date:
DOI: https://doi.org/10.1023/B:RESB.0000022932.74077.5e