Abstract
The process of heat exchange in the cylinder of an internal‐combustion engine has been investigated and the heat stresses of the working surfaces of the piston and the cylinder head have been analyzed. A method for calculating the heat resistance, the strength, and the thickness of heat‐protective coatings has been developed. Results of thermal‐cycle testing of a piston with heat‐resistant coatings, the properties of which were calculated by the method proposed, are presented.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
A. N. Gots, I. P. Matsarenko, and V. N. Mokeeva, Trends of development of automobile and tractor diesel engines abroad, Dvigatelestroenie, No. 8-9, 65-66, 80 (1991).
N. Kh. D'yachenko, A. K. Kostin, V. V. Larionov, et al., Study of heat transfer in unsteady-state operation of internal combustion engines, Izv. Vyssh. Uchebn. Zaved., Mashinostroenie, No. 7, 7–18 (1976).
B. S. Stefonovskii, Thermal Stress of Parts of High-Speed Piston Engines [in Russian], Mashinostroenie, Moscow (1978).
G. D. Chernyshev, A. S. Khachiyan, and V. I. Pikus, Working Process and Thermal Stress of Automobile Engines [in Russian], Mashinostroenie, Moscow (1986).
A. K. Kostin, V. V. Larionov, and L. I. Mikhailov, Thermal Stress of Internal Combustion Engines [in Russian], Mashinostroenie, Leningrad (1979).
E. A. Maksimov, V. N. Shikin, R. Z. Kavtaradze, and D. Sh. Benidze, Nonstationary heat transfer in highspeed diesel engines as a result of the piston compression-expansion, Dvigatelestroenie, No. 5, 10, 11 (1991).
V. E. Shchurkov and S. A. Afinevskii, Thermal stress of truck engines, Dvigatelestroenie, Nos. 10-11, 11–15 (1991).
P. A. Loshchakov, Results of computational-experimental studies of the temperature state of the cylinder sleeve of an 8Ch 13/14 engine, Dvigatelestroenie, Nos. 10-11, 49–51 (1991).
L. L. Odynets and E. Ya. Khanina, Physics of Oxide Films [in Russian], Petrozavodsk State Univ., Petrozavodsk (1981).
S. A. Astapchik and P. A. Vityaz' (Eds.), Theoretical and Technological Principles of Strengthening and Recovery of Products of Mechanical Engineering [in Russian], Polotsk State Univ., Tekhnoprint, Minsk (2001), pp. 72–223.
P. A. Vityaz', A. S. Ivashko, and A. F. Il'yushchenko, et al. (Eds.), Theory and Practice of Applying Protective Coatings [in Russian], Belaruskaya Navuka, Minsk (1998).
E. Serafimov and E. Ovcharov, Comparative study of the deformed state of the piston engine with body parts made of aluminum alloy, Dvigatelestroenie, No. 3, 6–8 (1991).
N. M. Chigrinova, Use of ceramic coatings as thermal barriers in thermocycling, Inzh.-Fiz. Zh., 74, No. 6, 167–173 (2001).
A. Günterschulze and G. Betz, Electrolytic Capacitors [Russian translation], Oborongiz, Moscow (1938).
L. N. Zakgeim, Electrolytic Capacitors [in Russian], Gose′nergoizdat, Moscow-Leningrad (1963).
B. M. Tareev and M. M. Lerner, Oxide Insulation [in Russian], E′nergiya, Moscow-Leningrad (1964).
N. D. Velikosel'skaya, Improvement of the durability of friction-pair parts of underwater oil-gas-field equipment by surface strengthening by the method of microarc oxidation, Author's Abstract of Candidate Dissertation (in Engineering), Moscow (1989).
V. S. Rudnev, Special features of formation and certain properties of coatings obtained by micro-arc treatment based on aluminum alloys, Fiz. Khim. Obrab. Mater., No. 3, 45–49 (1990).
E. E. Aver'yanov, Handbook on Anodic Oxidation [in Russian], Mashinostroenie, Moscow (1988).
T. V. Van, S. D. Brown, and G. P. Wirtz, Mechanism of anodic spark deposition, Amer. Ceram. Soc. Bull., 56, No. 6, 564–566 (1977).
L. L. Gruss and W. Mc. Neil, Anodic spark reaction products in aluminate, tungstate and silicate solutions, Electrochem. Technol., 1, No. 9-10, 283–287 (1963).
G. A. Markov, V. I. Belevantsev, O. P. Terleeva, et al., Microarc oxidation, Vestn. MGTU, No. 1, 34–35 (1992).
N. M. Chigrinova, Optimization of the process of obtaining heat barriers by anodic microarc oxidation, Vestn. Mashinostroeniya, No. 9, 69–72 (2001).
N. M. Chigrinova, Heat protection of pistons by high-speed anodic microarc oxidation, Zashchita Metallov, 36, No. 3, 303–309 (2000).
A. V. Attetkov, I. K. Volkov, and E. S. Tverskaya, The optimum thickness of a cooled coated wall exposed to local pulse-periodic heating, Inzh.-Fiz. Zh., 74, No. 6, 82–87 (2001).
A. I. Leont'ev (Ed.), Theory of Heat and Mass Transfer [in Russian], Vysshaya Shkola, Moscow (1979). 27._ S. V. Belov (Ed.), Permeable Porous Materials: Handbook [in Russian], Metallurgiya, Moscow (1987). 28._ Yu. L. Krasulin (Ed.), Porous Structural Ceramics [in Russian], Metallurgiya, Moscow (1980).
O. I. Trebushko, Principles of Elasticity and Plasticity Theory [in Russian], Nauka, Moscow (1984).
E. F. Vinokurov, M. K. Balykin, I. A. Golubev, et al. (Eds.), Handbook on Resistance of Materials [in Russian], Nauka i Tekhnika, Minsk (1988).
A. S. Orlin (Ed.), Internal Combustion Engines. Design and Operation of Piston Combined Engines [in Russian], Mashinostroenie, Moscow (1995).
N. M. Chigrinova and V. E. Chigrinov, Improvement of thermal resistance of pistons of high-speed engines by the method of anodic microarc oxidation, Vestsi Nats. Akad. Navuk Belarusi, Ser. Fiz.-Te′kh. Navuk, No. 2, 45–49 (2000).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chigrinova, N.M., Kuznechik, O.O. & Chigrinov, V.V. Analysis of Heat Stresses of the Parts of the Cylinder–Piston Group with Heat‐Protective Coatings in an Internal‐Combustion Engine. Journal of Engineering Physics and Thermophysics 77, 578–589 (2004). https://doi.org/10.1023/B:JOEP.0000036504.35261.fa
Issue Date:
DOI: https://doi.org/10.1023/B:JOEP.0000036504.35261.fa