Abstract
Fatigue cracks have been generated in the commercial aluminium alloys AA2024 and AA6013 and analysed with a positron microprobe. This instrument provides laterally resolved positron annihilation measurements, which are sensitive to lattice defects like vacancies and dislocations. These commercial alloys have undergone a solution heat treatment and quenching prior to fatigue testing. Subsequently, they have been aged at room temperature and 190°C for AA2024 and AA6013, respectively. We performed the fatigue crack generation both in air and under the influence of a chemically aggressive environment (artificial seawater). Due to the corrosive environment hydrogen is probably produced at the fresh fractured surface in the vicinity of the crack tip. We discuss the possible implications of in-diffused hydrogen on the produced lattice defects, especially when there is a delayed migration of vacancies in the lattice, due to a reduced mobility.
Similar content being viewed by others
References
A. Wilm, Metallurgie 8 (1911) 225.
R. P. Wei and J. D. Landes, Mater. Res. Stand 9 (1969) 25.
I. Tockels, G. LÑtjering and A. Gysler, Mater. Sci. Forum 217 (1996) 1599.
K. Nocke, F. Bergner, H. Bersch, I. Haase, H. Worch, G. Tempus and E. Loechelt, Mater. Corros. 51(2000) 628.
I. Haase, K. Nocke, H. Worch, G. Zouhar and G. Tempus, Prakt. Metallogr. 38 (2001) 3, 119.
H.-J. Schmidt and Brandecker, in "Fatigue '96" (Elsevier Science, Oxford, UK, 1996) p. 643.
D. S. Dugdale, J. Mech. Phys. Soc. 8 (1960) 100.
I. K. Mackenzie, T. L. Khoo, A. B. McDonald and B. T. A. Mckee, Phys. Rev. Lett. 19 (1967) 946.
R. Krause-Rehberg and H. S. Leipner, "Positron Annihilation in Semiconductors" (Springer Verlag, Berlin Heidelberg, 1999).
H. Greif, M. Haaks, U. Holzwarth, U. Männig,et al., Appl. Phys. Lett. 71 (1997) 2115
R. W. Baluffi, J. Nucl. Mater. 69/70 (1978) 240.
B. Thanaboonsombut and T. H. Sanders, The 4th International Conference on Aluminium Alloys (1994) p. 197.
Y. A. Bagaryatsky, Dokl. Akad. Nauk SSSR 87 (1952) 397.
T. Wider, S. Hansen, U. Holzwarth and K. Maier, Phys. Rev. B57(9) (1998) 512C.
M. Haaks, K. Bennewitz, H. Bihr, U. MÄnnig, C. Zamponi and K. Maier, Appl. Surf. Sci. 149 (1999) 207.
R. N. West, Adv. Phys. 22 (1973) 263.
P. J. Schultz and K. G. Lynn, Rev. Mod. Phys. 60(3) (1988) 701.
M. J. Puska and R. M. Nieminien, ibid. 66 (1994) 841.
G. Dlubek, O. BrÑmmer, J. Yli-Kauppila and P. HautojÄrvi, J. Phys. F: Metal Phys. 11 (1981) 2525.
A. Dupasquier, P. Folegati, N. De Diego and A. Somoza, J. Conds. Matter 10 (1998) 10409.
T. E. M. Staab, E. Zschech and R. Krause-Rehberg, J. Mater. Sci. 35 (2000) 4667.
H. Hjelmberg, Surf. Sci. 81 (1979) 539.
H. E. Hansen, R. M. Nieminen and M. J. Puska, J. Phys. F: Met. Phys. 14 (1984) 1299.
W. Eichenauer, K. Hattenbach and A. Pebler, Z. Metallkd. 52 (1961) 682.
S. Linderoth, H. RajainmÄki and R. M. Nieminen, Phys. Rev. B 35(11) (1986) 5524.
W. Wampler and W. Gauster, J. Phys. F 8 (1978) 310.
F. Pleiter and C. Hohenemser, Phys. Rev.B 25 (1982) 106.
S. Sonneberger, Diploma Thesis, University Bonn, Germany, 2002.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zamponi, C., Sonneberger, S., Haaks, M. et al. Investigation of fatigue cracks in aluminium alloys 2024 and 6013 in laboratory air and corrosive environment. Journal of Materials Science 39, 6951–6956 (2004). https://doi.org/10.1023/B:JMSC.0000047537.16498.1d
Issue Date:
DOI: https://doi.org/10.1023/B:JMSC.0000047537.16498.1d