References
Chinese National Standard GB/T 231-1984, “Test Method for Brinell Hardness for Metals”.
B. R. Lawn, J. Amer. Ceram. Soc. 81 (1998) 1977.
P. D. Warren, J. Europ. Ceram. Soc. 15 (1995) 201.
S. G. Roberts, C. W. Lawrence, Y. Bisrat and P. D. Warren, J. Amer. Ceram. Soc. 82 (1999) 1809.
A. Franco, S. G. Roberts and P. D. Warren, Acta Mater. 45 (1997) 1009.
Y. W. Bao, S. B. Su, J. J. Yang, L. Sun and J. H. Gong, ibid. 50 (2002) 4659.
B. A. Latella, T. Liu and A. J. Atanacio, J. Europ. Ceram. Soc. 22 (2002) 1971.
F. Guiberteau, N. P. Padture and B. R. Lawn, J. Amer. Ceram. Soc. 77 (1994) 1825.
J. B. Quinn and G. D. Quinn, J. Mater. Sci. 32 (1997) 4331.
J. R. Tuck, A. M. Korsunsky, S. J. Bull and R. I. Davidson, Surf. Coat. Tech. 137 (2001) 217.
W. C. Oliver and G. M. Pharr, J. Mater. Res. 7 (1992) 1564.
J. S. Field and M. V. Swain, ibid. 8 (1993) 297.
Z. S. Basinski and S. J. Basinski, Prog. Mater. Sci. 36 (1992) 89.
J. Degli-Esposti, A. Jacques and A. George, Mater. Sci. Eng. A234–236 (1997) 1000.
J. H. Gong, A. Jacques and A. George, Scr. Mater. 41 (1999) 109.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gong, J., Bao, Y. Empirical method for the determination of hardness from low-load ball indentation tests for brittle materials. Journal of Materials Science 39, 3175–3177 (2004). https://doi.org/10.1023/B:JMSC.0000025852.86726.b7
Issue Date:
DOI: https://doi.org/10.1023/B:JMSC.0000025852.86726.b7