Abstract
In order to form a layered hydroxyapatite/zirconia ceramic, the solid state reaction and sintering were examined by the three processes of powder mixture, dry-pressing compaction and tape cast. The solid state reaction between hydroxyapatite and zirconia occurred in the thin width of 10–50 μm at interface in a layered composite body. In both sintered layer composites from dry compaction and tape cast, the significant deformation of composite bodies was observed, depending on sintering temperatures. By selecting a sintering temperature of 1200°C, we fabricated a layer ceramic composite of hydroxyapatite/zirconia exhibiting the flat film shape. The tape cast process was useful to form a porous sintered composite of hydroxyapatite and zirconia. The porous composite showed the removal performance of aqueous lead from wastewater.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Q. Y. Ma, S. Traina, T. Logan and J. Ryan, Environ. Sci. Technol. 28 (1994) 1219.
Y. Suzuki and Y. Takeuchi, J. Chem. Eng. Jpn. 27 (1994) 571.
J. Reichert and J. G. P. Binner, J. Mater. Sci. 31 (1996) 1231.
D. N. Misra, Coll. Surf. A 141 (1998) 173.
Y. Matsumura, J. B. Moffat, S. Suglyama, H. Hayashi, N. Shigemoto and K. Saito, J. Chem. Soc. Farad. Trans. 90 (1994) 2133.
B. Liptakova, M. Hronec and Z. Cvengrosova, Catal. Today 61 (2000) 143.
K. Y. Lee, Kwan, M. Houalla, D. M. Hercules and W. K. Hall, J. Catal. 145 (1994) 223.
S. Suzuki, K. Itoh, M. Ohgaki, M. Ohtani and M. Ozawa, Ceram. Int. 25 (1999) 287.
K. Shimizu, M. Oka, P. Kumar, Y. Kotoura, T. Yamamuro, K. Makinouchi and T. Nakamura, J. Biomed. Mater. Res. 27 (1993) 929.
O. Suzuki, T. Sato and T. Osanai, Nippon-Seikeigeka-Gakkai-Zasshi 64 (1990) 249.
M. Ozawa and H. Hasegawa, J. Mater. Sci. Lett. 10 (1991) 1359.
N. Tamari, M. Mouri and I. Kondo, J. Ceram. Soc. Jpn. 95 (1987) 80.
J.-M. Wu and T.-S. Yeh, J. Mater. Sci. 23 (1988) 3771.
K. Yamashita, T. Kobayashi, M. Kitamura, T. Umegaki and T. Kanazawa, J. Ceram. Soc. Jpn. 96 (1988) 616.
K. Ioku, M. Yoshimura and S. Somiya, Biomaterials 11 (1990) 57.
J. Li, L. Hermansson and R. Soremark, J. Amer. Ceram. Soc. 76 (1993) 2685.
Y.-M. Kong, S. Kim, H.-E. Kim and I.-S. Lee, ibid. 82 (1999) 2963.
E. Chang, W. J. Chang, B. C. Wang and C. Y. Yang, J. Mater. Sci. Mater. Med. 8 (1997) 193.
K. A. Khor, L. Fu, V. J. P. Lim and P. Cheang, Mater. Sci. Eng. A 276 (2000) 160.
J. A. Delgado, L. Morejon, S. Martinez, M. P. Ginebra, N. Clarlsson, E. Fernandez, J. A. Planell, M. T. Clavaguera-Mora and J. Rodriguez-Viejo, J. Mater. Sci. Mater. Med. 10 (1999) 715.
V. S. Silva, F. S. Lameiras and R. Z. Domingues, Ceram. Int. 27 (2001) 615.
R. Ramachandra Rao and T. S. Kannan, Mater. Sci. Eng. C 20 (2002) 187.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ozawa, M., Kawagoe, M. & Suzuku, S. Solid state reaction, sintering and Pb removal activity of hydroxyapatite/zirconia layered composite. Journal of Materials Science 39, 1337–1342 (2004). https://doi.org/10.1023/B:JMSC.0000013894.68512.a5
Issue Date:
DOI: https://doi.org/10.1023/B:JMSC.0000013894.68512.a5