Abstract
The stress–strain state and local buckling of thin plates with an oblique edge crack are studied. An expression for critical stresses is derived
Similar content being viewed by others
REFERENCES
A. N. Guz and M. Sh. Dyshel', “On deformation of plates with an edge crack under tension,” Prikl. Mekh., 31, No. 11, 85-90 (1995).
A. N. Guz, M. Sh. Dyshel', and V. M. Nazarenko, Fracture and Stability of Cracked Materials, Vol. 4 of the five-volume series Nonclassical Problems of Fracture Mechanics [in Russian], Naukova Dumka, Kiev (1992).
M. Sh. Dyshel', “Influence of plastic properties on the stability and fracture of plates with an edge crack,” Prikl. Mekh., 34, No. 7, 73-77 (1998).
M. Sh. Dyshel', “Fracture of stretched plates with an edge crack via preliminary local buckling,” Prikl. Mekh., 32, No. 2, 59-63 (1996).
R. L. Carlson and F. A. Riggs, “Note on the buckling of a tensioned sheet with an edge slot,” Isr. J. Technol., 14, 156-159 (1976).
M. Sh. Dyshel', “Stability and fracture of plates with a central and an edge crack under tension,” Int. Appl. Mech., 38, No. 4, 472-476 (2002).
A. N. Guz, “Constructing the three-dimensional theory of stability of deformable bodies,” Int. Appl. Mech., 37, No. 1, 1-37 (2001).
A. N. Guz and M. Sh. Dyshel', “Fracture and buckling of thin panels with edge crack in tension,” Theor. Appl. Fract. Mech., 37, No. 36, 57-60 (2001).
A. N. Guz and E. Yu. Gladun, “Plane problem of three-dimensional stability of a cracked plate,” Int. Appl. Mech., 37, No. 10, 1281-1289 (2001).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dyshel', M.S. Stability of Plates with an Oblique Edge Crack under Tension. International Applied Mechanics 39, 1081–1083 (2003). https://doi.org/10.1023/B:INAM.0000008217.47620.f0
Issue Date:
DOI: https://doi.org/10.1023/B:INAM.0000008217.47620.f0