References
Beuth, J.L. (1996). Separation of crack extension modes in orthotropic delamination models. International Journal of Fracture 77, 305–321.
Comninou, M. (1977). The interface crack. Journal of Applied Mechanics 44, 631–636.
Comninou, M. and Dundurs, J. (1980). Effect of friction on the interface crack loaded in shear. Journal of Elasticity 10, 203–212.
Gautesen, A.K. and Dundurs, J. (1988). The interface crack under combined loading. Journal of Applied Mechanics 55, 580–586.
Gerberich, W. and Yang, W. (Eds.) (2003). Interfacial and Nanoscale Failure (Vol. 8). In: Comprehensive Structural Integrity, (Edited by I. Milne, R.O. Ritchie and B. Karihaloo). Elsevier Pergamon, Amsterdam.
Hutchinson, J.W. and Suo, Z. (1992). Mixed mode cracking in layered materials. Advances in Applied Mechanics 29, 63–191.
Hwu, C. and Hu, J.S (1992). Stress intensity factors and energy release rates of delaminations in composite laminates. Engineering Fracture Mechanics 42, 977–988.
Irwin, G.R. (1957). Analysis of stresses and strains near the end of a crack traversing a plate. Journal of Applied Mechanics 24, 361–364.
Malyshev, B.M. and Salganik, R.L. (1965). The strength of adhesive joints using the theory of cracks. International Journal of Fracture 4, 114–128.
Narayan, S.H. and Beuth, J.L. (1998). Designation of mode mix in orthotropic composite delamination problems. International Journal of Fracture 90, 383–400.
París, F., del Caño, J.C. and Varna, J. (1996). The fibre-matrix interface crack-A numerical analysis using Boundary Elements. International Journal of Fracture 82, 11–29.
Raju, I.S., Crews, J.H. and Aminpour, M.A. (1988). Convergence of strain energy release rate components for edge-delaminated composite laminates. Engineering Fracture Mechanics 30, 383–396.
Rice, J.R. (1988). Elastic fracture mechanics concepts for interfacial cracks. Journal of Applied Mechanics 55, 98–103.
Salganik, R.L. (1963). The brittle fracture of cemented bodies. Journal of Applied Mathematics and Mechanics 27, 1468–1478.
Sun, S.T. and Jih, C.J. (1987). On strain energy release rates for interfacial cracks in bi-material media. Engineering Fracture Mechanics 28, 13–20.
Sun, S.T. and Qian, W. (1997). The use of finite extension strain energy release rates in fracture of interfacial cracks. International Journal of Solids and Structures 34, 2595–2609.
Toya, M. (1974). The interface crack. Journal of Mechanics and Physics of Solids 22, 325–348.
Toya, M. (1992). On mode I and mode II energy release rates of an interface crack. International Journal of Fracture 56, 345–352.
Williams, M.L. (1959). The stress around a fault of crack in dissimilar media. Bull. Seismol. Soc. Am. 49, 199–204.
Zou, Z., Reid, S.R., Soden, P.D. and Li, S. (2001). Mode separation of energy release rate for delamination in composite laminates using sublaminates. International Journal of Solids and Structures 38, 2597–2613.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mantič, V., ParÍs, F. Relation between SIF and ERR based measures of fracture mode mixity in interface cracks. International Journal of Fracture 130, 557–569 (2004). https://doi.org/10.1023/B:FRAC.0000049496.77533.d5
Issue Date:
DOI: https://doi.org/10.1023/B:FRAC.0000049496.77533.d5