Abstract
The present paper deals with the measurements of the critical Crack Tip Opening Angle by using an instrumented test. There is a comparison between the analysis of results made by a well known kinematic model and those given by finite element analysis based on a cohesive model for node release. Analysis is performed both on simple specimens and on back slotted ones.
Similar content being viewed by others
References
Azodi, D. and Kalthoff, J.F. (1990). Evaluation of rapid crack propagation J-values for ductile steels, Proc. of 4th Int. Conf. on Numerical methods in fracture mechanics, Freiburg, Germany, 23rd–27th April 1990.
Berardo, G., Salvini, P. and Di Biagio, M. (2000). Application of cohesive model to dynamic ductile fracture tests, XIII European Conference on Fracture, Elsevier, San Sebastian (Spain).
Corigliano, A., Maier, G. and Mariani, S. (1999). Analysis of ductile fracture in damaged pipelines by a geometric parameter method, Engineering Structures 21, 924-936.
Cotterel, B. and Reddel, J.K. (1977). The essential work of plane stress fracture. Int. J. of Fracture 13, 267-277.
Demofonti, G. et al. (1995). Step by step procedure for the two specimen CTOA test, Proc. of the 2nd International Conference on Pipeline Technology, vol. II, Ostend.
Fonzo, A., Salvini, P., Di Biagio, M. and Mannucci, G. (2002). Full History Pipeline burst test through Finite Element Analysis, Proc. of 4th International Pipeline Conference, Calgary, Alberta, Canada, September 29th–October 3rd 2002.
Kanninen, M.F. and O'Donoghue, P.E. (1995). Research challenges arising from current and potential applications of dynamic fracture mechanics to the integrity of engineering structures, Int. Journal of Solids Structures 32, 2423-2445.
Knott, J.F. (1973). Fundamentals of Fracture Mechanics, Butterworths, London.
Martinelli, A. and Venzi, S. (1996). Tearing modulus, J-integral, CTOA, and crack profile shape obtained from the load displacement curve only, Engineering Fracture Mechanics 53/2, 263-277.
Matsoukas, G., Cotterel, B. and Mai, Y.M. (1984). On the plastic rotation constant used in standard COD tests, International Journal of Fracture 26, R49-R53.
Newman, J.C. Jr., James, M.A. and Zerbst, U. (2003). A review of the CTOA/CTOD fracture criterion, Engineering Fracture Mechanics 70/3–4, 371-385.
Salvini, P., Berardo, G., Demofonti, G. and Mannucci, G. (1999). A Fracture Process Zone model for CTOA analysis. Int. Conf. On Fracture Damage Mechanics 1999, Queen Mary & West field College University of London, London (UK), 27–29 July 1999.
Salvini, P., Berardo, G., Demofonti, G. and Mannucci, G. (2000). Numerical model of backfill constraint effect during crack propagation on buried large diameter gas pipelines, Int. Pipeline Technology Conference, I, 315-329, Brugge (Belgium), May 2000.
Salvini, P., Fonzo, A. and Mannucci, G. (2003). Identification of CTOA and Fracture Process Parameters by Drop Weight Test and Finite Element Simulation, Engineering Fracture Mechanics 70/3–4, 553-566.
Rice, J.R. and Sorensen, E.P. (1978). Continuing crack-tip deformation and fracture for plane-strain crack growth in elastic-plastic solids, Journ. Mech. Phys. Solids 26, 163-186.
Rudland, D.L., Wilkowski, G., Wang, Y., Horsley, D., Rothwell, B. and Glover, A. (2002). Investigation into the use of a single specimen for the determination of dynamic steady state propagation resistance in high toughness line-pipe steels, Proc. of 4th International Pipeline Conference, Calgary, Alberta, Canada, September 29th–October 3rd 2002.
Wang, B., Yang, W. and Hwang, K.C. (1994). An engineering fracture parameter for non-J-controlled crack growth, Fatigue Fract. Engng. Mater. Struct. 17/4, 469-477.
Wang, G.S. (1995). An EPFM analysis of crack initiation, stable growth and instability, Engineering Fracture Mechanics 50, 261-282.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fonzo, A., Salvini, P. & Di Biagio, M. Fracture propagation in DWT back slotted specimens. International Journal of Fracture 128, 159–169 (2004). https://doi.org/10.1023/B:FRAC.0000040979.74745.5b
Issue Date:
DOI: https://doi.org/10.1023/B:FRAC.0000040979.74745.5b