Abstract
The factors that determine the technogenic safety of chemical fibre production are structured. Methods of minimizing some negative environmental consequences in chemical fibre technology are revealed and elaborated: creation of textile auxiliaries that satisfy environmental and process requirements; creation of a data bank on the corrosion resistance of materials and inhibition in fibre production conditions; preparation of thread-guide parts with a given surface microrelief that reduces thread wastes and wastes formed in replacing worn parts.
Similar content being viewed by others
REFERENCES
B. A. Sokolov and V. E. Khain, “Oil and gas geology in the 21st century: Predicted evolution,” in: Proceedings of the V International Conference “New Ideas in Oil and Gas Geology and Geochemistry [in Russian], Part 1, MGU, Moscow (2001), pp. 7–8.
V. T. Krivosheev, E. Z. Ivanova, et al., “New Middle-Visean oil-and gas-bearing complex in the far southwestern part of the East European platform” [in Russian], Ibid., pp. 249–252.
A. N. Guseva and L. P. Klimushkina, “Status of the problem of genesis of crude oil at the beginning of the 21st century” [in Russian], Ibid., pp. 115–117.
I. N. Ivanova, Visnik KNUTD (Kiev), No. 1, 101–104 (2003).
L. G. Mel'nik, Ekologichna Ekonomika, Universitet'ska Kniga, Sumi (2002).
V. N. Kislyi, B. V. Lapin, and I. A. Trofilin, Ecologization of Business Management [in Russian], Universitet'ska Kniga, Sumi (2002), pp. 104–107.
Yu. D. Boichuk, E. M. Sologienko, and O. V. Bugai, Ekologiya i Okhorona Navkolishn'ogo Seredovishcha, Universitet'ska Kniga, Sumi (2002).
D. G. Galunov, A. A. Lisenko, and L. V. Shvagurtseva, Visnik KNUTD (Kiev), No. 1, 72–74 (2003).
M. M. Kardash, N. B. Fedorchenko, and A. A. Fedorchenko, Khim. Volokna, No. 1, 66–68 (2003).
O. L. Saranin and I. N. Ivanova, “Environmental and economic aspects of waste processing in production of thread-guide fittings,” in: Proceedings of the International Scientific and Practical Conference “Technology for Chemical Fibres” [in Russian], ChTsNTI, Chernigov (2001), pp. 244–248.
V. D. Grevenyuk, T. T. Sobolevskaya, and A. G. Makhno, Khim. Tekhnol. Vody, 11,No. 5, 407–421 (1989).
S. E. Artemenko, T. P. Ustinova, and E. I. Titorenko, Khim. Volokna, No. 1, 69–71 (2003).
M. P. Kovalko and S. P. Denisyuk, in: Energosberezhennya — Prioritetnii Napryamok Derzhavnoi Politiki Ukraini, A. K. Shidlovs'kii (ed.), UEZ, Kiev (1998).
V. P. Zheleznyi, N. P. Bykovets, and O. Ya. Khlieva, Ekotekhnol. Resursosberezh. (Kiev), No. 5, 45–33 (2002).
V. A. Pakharenko and G. Ya. Levitskaya, Visnik KNUTD (Kiev), No. 1, 105–111 (2003).
E. M. Aizenshtein, V. N. Efremov, and R. Shnaider, Khim. Volokna, No. 1, 3–10 (2003).
B. E. Geller, Khim. Volokna, No. 6, 3–7 (1997).
L. N. Mizerovskii, Yu. M. Bazarov, and M. G. Pavlov, “Prospects for improving production technology of polycaproamide used in manufacture of textile and industrial fibres,” in: Proceedings of the II Belorussian Scientific and Practical Conference “Scientific and Technical Problems in Development of Chemical Fibre Production in Belarus' [in Russian], Mogilev (2001), pp. 48–69.
K. E. Perepelkin, Legprombiznes. Direktor, No. 2, 16 (2002).
Khimiya Ukrainy, No. 11 (77), 29–32 (2003).
E. K. Platonov, M. V. Stupa, and V. I. Stupa, Khim. Volokna, No. 3, 57–64 (2002).
O. G. Pakhomov, “Modernization of machines for spinning of industrial fibres to increase the competitiveness of manufactured products,” in: Proceedings of the International Scientific and Technical Conference “Technology for Chemical Fibres” [in Russian], ChTsNTI, Chernigov (2001), pp. 186–190.
G. L. Makovei, Ya. V. Zel'tser, I. N. Ivanova, et al., Khim. Volokna, No. 3, 21–22 (1987).
G. L. Makovei, Ya. V. Zel'tser, I. N. Ivanova, et al., Khim. Volokna, No. 4, 19–20 (1986).
L. N. Petrov and I. P. Osadchuk, Zashchita Metallov, 19,No. 4, 552–555 (1983).
B. Ya. Barochina, G. V. Talaeva, et al., Protection of Equipment and Structures in Chemical Fibre Plants from Corrosion [in Russian], Khimiya, Moscow (1970).
J. Paul et al., Intern. Fiber J., No. 1, 68–69 (2002).
G. Zeitz, E. Hey, and C. Rau, Intern. Fiber J., No. 1, 66–67 (2002).
U. Enders and K. Schafer, “Economical and flexible melt spinning technologies for industrial yarn,” in: Proceedings of the II International Scientific and Practical Conference “Technology for Chemical Fibres” [in Russian], ChTsNTI, Chernigov (2003), pp. 38–51.
USSR Inventor's Certificate No. 1313013, Int. Cl. C 25 D 3/06, I. N. Ivanova, A. V. Gorodyskii, et al., Method of Production of Chromium Coatings, No. 3773461/22–02, submitted 07.18.84; Byull., No. 19 (05.23.87).
USSR Inventor's Certificate No. 1542974, Int. Cl. D 01 H 13/28, D 02 J 13/00, M. V. Bogdan, A. V. Korneev, I. N. Ivanova, et al., Method of Drawing Synthetic Fibres, No. 4374131/30–12, submitted 02.02.88; Byull., No. 6 (02.15.90).
I. N. Ivanova, R. A. Rumyantsev, and T. G. Shmotina, Khim. Volokna, No. 5, 49–50 (1986).
N. A. Perevalova, M.Ya. Gusakov, et al., Khim. Volokna, No. 2, 57–58 (1984).
G. L. Makovei, I. N. Ivanova, et al., Khim. Volokna, No. 3, 42–43 (1986).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ivanova, I.N. Some Problems of Technogenic Safety in Chemical Fibre Production. Fibre Chemistry 35, 374–379 (2003). https://doi.org/10.1023/B:FICH.0000012196.91744.28
Issue Date:
DOI: https://doi.org/10.1023/B:FICH.0000012196.91744.28