Abstract
This paper summarizes a series of experimental studies addressing combustion of single metal particles. Sets of free‐falling monodisperse molten metal droplets were formed at repeatable initial temperatures and velocities in a pulsed microarc discharge ignited between a cold tool cathode and a consumable wire anode. The droplets formed in oxygenated environments immediately ignited and burned, while their temperature histories were studied using optical pyrometry. Burning particles were quenched at different combustion times using techniques providing variable cooling rates. Analyses of the quenched samples were used to recover the evolution of burning particle compositions for different metals. Experiments were conducted with Al, Mg, Zr, Ti, Ta, W, Mo, Fe, and Cu particles. In addition, similar combustion experiments were carried out with boron particles produced using an oxygen‐acetylene torch melting an edge of a vibrating boron filament. Most of the combustion experiments were conducted in air, while argon–oxygen, helium–oxygen, and carbon‐dioxide environments were also used in some tests. A limited number of experiments on aluminum‐particle combustion were conducted in microgravity. The experiments were aimed at identifying correlations between the burning particle temperature and composition histories. Dissolution of oxygen and other gases was observed to occur within the burning metal, leading to phase changes coinciding with sudden changes in metal combustion regimes. Equilibrium metal–gas phase diagrams were used to interpret the experimentally observed metal combustion behavior. Based on the experimental results, an expanded mechanism of metal combustion was suggested, emphasizing reactions and phase changes occurring within the burning metal in addition to reactions occurring on and above the metal surface.
Similar content being viewed by others
REFERENCES
T. A. Brzustowski and I. Glassman, “Vapor-phase diffusion flames in magnesium and aluminum combustion. 1. Analytical study,” in: H. G. Wolfhard, I. Glassman, and L. Green (eds.), Heterogeneous Combustion, Academic Press, New York (1964), pp. 75-115.
A. L. Breiter, V. M. Mal'tsev, and E. I. Popov, “Models of metal ignition,” Combust. Expl. Shock Waves, 13, No. 4, 475-484 (1977).
E. W. Price and R. K. Sigman, “Combustion of aluminized solid propellants,” in: V. Yang, T. B. Brill, and Wu-Zhen Ren (eds.), Progress in Astronautics and Aeronautics, Vol. 185: Solid Propellant Chemistry, Combustion, and Motor Interior Ballistics, Ch. 2.18. AIAA Inc., Reston, VA (2000), pp. 663-687.
A. Maček, “Fundamentals of combustion of single aluminum and beryllium particles,” in: Proc. 11th Symp. (Int.) on Combustion, The Combustion Inst., Pittsburgh, PA (1967), pp. 203-217.
A. Maček and J. M. Semple, “Combustion of boron particles at atmospheric pressure,” Combust. Sci. Technol., 1, No. 3, 181-191 (1969).
L. S. Nelson, D. E. Rosner, S. C. Kurzius, and H. S. Levine, “Combustion of zirconium droplets in oxygen/rare gas mixtures. Kinetics and mechanism,” in: Proc. 12th Symp. (Int.) on Combustion, The Combustion Inst., Pittsburgh, PA (1968), pp. 59-70.
J. L. Prentice, “Combustion of pulse-heated single particles of aluminum and beryllium,” Combust. Sci. Technol., 1, No. 5, 385-398 (1970).
R. Bhatia and W. A. Sirignano, “Convective burning of a droplet containing a single metal particle,” Combust. Flame, 93, No. 3, 215-229 (1993).
E. Ya. Shafirovich and U. I. Goldshleger, “Pulsating combustion of magnesium particles in CO2,” Combust. Sci. Technol., 135, Nos. 1-6, 241-254 (1998).
P. Bucher, L. Ernst, F. L. Dryer, et al., “Detailed studies on the flame structure of aluminum particle combustion,” in: V. Yang, T. B. Brill, and Wu-Zhen Ren(eds.), Progress in Astronautics and Aeronautics, Vol. 185: Solid Propellant Chemistry, Combustion, and Motor Interior Ballistics, AIAA Inc., Reston, VA (2000), pp. 689-722.
T. A. Brzustowski and I. Glassman, “Spectroscopic investigation of metal combustion,” IAA Accession No. A65-10970 (1964).
A. M. Mellor and I. Glassman, “A physical criterion for metal ignition,” Paper WSS-CI 64-20, Western States Sect. Combust. Inst. (1964).
C. K. Law, “Simplified theoretical model for the vaporphase combustion of metal particles,” Combust. Sci. Technol., 7, No. 5, 197-212 (1973).
C. K. Law, “Models for metal particle combustion with extended flame zones,” Combust. Sci. Technol., 12, Nos. 4-6, 113-124 (1976).
S. R. Turns, S. C. Wong, and E. Ryba, “Combustion of aluminum-based slurry agglomerates,” Combust. Sci. Technol., 54, Nos. 1-6, 299-318 (1987).
K. P. Brooks and M. W. Beckstead, “Dynamics of aluminum combustion,” J. Propuls. Power, 11, No. 4, 769-780 (1995).
A. V. Suslov, E. L. Dreizin, and M. A. Trunov, “Formation of monodisperse refractory metal particles by an impulse discharge,” Powder Technol., 74, No. 1, 23-30 (1993).
A. V. Suslov, E. L. Dreizin, and M. A. Trunov, “Study of combustion of monodisperse metallic particles produced by impulse arc,” Combust. Expl. Shock Waves, 26, No. 4, 394-396 (1990).
E. L. Dreizin, A. V. Suslov, and M. A. Trunov, “Temperature jumps in free metal particle combustion,” Combust. Sci. Technol., 87, Nos. 1-6, 45-58 (1992).
E. L. Dreizin, A. V. Suslov, and M. A. Trunov, “General trends in metal particle heterogeneous combustion,” Combust. Sci. Technol., 90, Nos. 1-4, 79-99 (1993).
E. L. Dreizin and M. A. Trunov, “Surface phenomena in aluminum combustion,” Combust. Flame, 101, No. 3, 378-382 (1995).
E. L. Dreizin, “Experimental study of stages in aluminum particle combustion in air,” Combust. Flame, 105, No. 4, 541-556 (1996).
I. E. Molodetsky, E. L. Dreizin, and C. K. Law, “Evolution of particle temperature and internal composition for zirconium burning in air,” in: Proc. 26th Symp. (Int.) on Combustion, Vol. 2, The Combustion Inst., Pittsburgh, PA (1996), pp. 1919-1927.
I. E. Molodetsky and E. L. Dreizin, “High-temperature oxygen dissolution in liquid zirconium,” in: Materials Research Society Symposium Proceedings 418 (Decomposition, Combustion, and Detonation Chemistry of Energetic Materials) (1996), pp. 195-200.
I. E. Molodetsky, E. L. Dreizin, E. P. Vicenzi, and C. K. Law, “Phases of titanium combustion in air,” Combust. Flame, 112, 522-532 (1998).
E. L. Dreizin, “On the mechanism of asymmetric aluminum particle combustion,” Combust. Flame, 117, 841-850(1999).
S. Rossi, E. L. Dreizin, and C. K. Law, “Combustion of aluminum particles in carbon dioxide,” Combust. Sci. Technol., 164, 209-237 (2001).
E. L. Dreizin, “Experimental study of aluminum particle flame evolution in normal and micro-gravity,” Combust. Flame, 116, 323-333 (1999).
E. L. Dreizin, D. G. Keil, W. Felder, and E. P. Vicenzi, “Phase changes in boron ignition and combustion,” Combust. Flame, 119, 272-290 (1999).
E. L. Dreizin, “Phase changes in metal combustion,” Prog. Energ. Combust. Sci., 26, No. 1, 57-78 (2000).
T. B. Massalski, H. Okamoto, P. R. Subramanian, and L. Kacprzak (eds.), Binary Alloy Phase Diagrams, ASM Publ., Materials Park, OH (1990).
Yu. V. Levinskii, p–T–x Binary Phase Diagrams of Metal Systems [in Russian], Metallugriya, Moscow (1990).
J. D. Fast, Interaction of Metals and Gases, Academic Press, New York, London (1965).
E. W. Price, “Combustion of metalized propellants,” K. K. Kuo and M. Summerfield (eds.), Fundamentals of Solid Propellant Combustion, AIAA, New York (1984), pp. 479-514.
P. Bucher, R. A. Yetter, F. L. Dryer, et al., “Flame structure measurement of single, isolated aluminum particles burning in air,” in: 26th Symp. (Int.) on Combustion, The Combustion Inst., Pittsburgh, PA (1997), pp. 1899-1908.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dreizin, E.L. Effect of Phase Changes on Metal‐Particle Combustion Processes. Combustion, Explosion, and Shock Waves 39, 681–693 (2003). https://doi.org/10.1023/B:CESW.0000007682.37878.65
Issue Date:
DOI: https://doi.org/10.1023/B:CESW.0000007682.37878.65