Abstract
The mechanical and microstructural properties of 6061+20% Al2O3p and 7005+10% Al2O3p aluminium based metal matrix composites joined by friction stir welding were analyzed in the present study. The two materials were welded into the form of sheets of 7 mm thickness after T6 treatment and were tested in tension at room temperature. The microstructure of the joints was observed by optical microscopy and the fracture surfaces were analyzed by employing a scanning electron microscope equipped with field emission gun in order to study the micromechanisms involved during the deformation.
Similar content being viewed by others
References
Thomas, W. M., Nicholas, E. D., Needam, J. C., Murch, M. G., Templesmith, P. and Dawes, C. J., GB Patent Application No. 9125978.8, December 1991 and US Patent No. 5460317, October 1995.
Lee, W.-B., Yeon, Y.-M. and Jung, S.-B., ‘The Joint Properties of Dissimilar Formed Al Alloys by Friction StirWelding According to the Fixed Location of Materials’, Scripta Materialia 49, 2003, 423–428.
Bussu, G. and Irving, P. E., ‘The Role of Residual Stress and Heat Affected Zone Properties on Fatigue Crack Propagation in Friction Stir Welded 2024-T351 Aluminium Joints’, International Journal of Fatigue 25, 2003, 77–88.
John, R., Jata, K. V. and Sadananda, K., ‘Residual Stress Effects on near Threshold Fatigue Crack Growth in Friction Stir Welded Aerospace Alloys’, International Journal of Fatigue 25, 2003, 939–948.
Jata, K. V., Sankaran, K. K. and Ruschau, J., ‘Friction-Stir Welding Effects on Microstructure and Fatigue of Aluminum Alloy 7050-T7451’, Metallurgical and Materials Transactions, September 2000, 31A, 2181–2192.
Su, J.-Q., Nelson, T.W., Mishra, R. and Mahoney, M., ‘Microstructural Investigation of Friction Stir Welded 7050-T651 Aluminium,’ Acta Materialia 51, 2003, 713–729.
Sato, Y. S., Urata, M., Kokawa, H. and Ikeda, K., ‘Hall-Petch Relationship in Friction Stir Welds of Equal Channel Angular-Pressed Aluminium Alloys’, Materials Science and Engineering A354, 2003, 298–305.
Berbon, P. B., Bingel, W. H., Mishra, R. S., Bampton, C. C. and Mahoney, M.W., ‘Friction Stir Processing: A Tool to Homogenize Nanocomposites Aluminum Alloys’, Scripta Materialia 442001, 61–66.
Jata, K. V. and Semiatin, S. L., ‘Continuous Dynamic Recrystallization During Friction Stir Welding of High Strength Aluminium Alloys’, Scripta Materialia 43(8), 2000, 743–749.
Humphreys, F. J. and Hatherly, M., ‘Recrystallization and Related Annealing Phenomena’, Elsevier Science Ltd., 1995.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cavaliere, P., Cerri, E., Marzoli, L. et al. Friction Stir Welding of Ceramic Particle Reinforced Aluminium Based Metal Matrix Composites. Applied Composite Materials 11, 247–258 (2004). https://doi.org/10.1023/B:ACMA.0000035478.71092.ec
Issue Date:
DOI: https://doi.org/10.1023/B:ACMA.0000035478.71092.ec